myskills 2011 itpc teori akhir

7/28/2019 Myskills 2011 Itpc Teori Akhir

http://slidepdf.com/reader/full/myskills-2011-itpc-teori-akhir 1/21

MySkills 2011



QUESTION 1You work as the network administrator at MySkills.com. The MySkills.com network consists of a single ActiveDirectory domain named MySkills.com. All servers on the MySkills.com network run Windows Server 2003and all client computers run Windows XP Professional.

The MySkills.com network contains a Windows Server 2003 file server named MYSKILLS-SR11. Duringmonitoring you notice that the free space on MYSKILLS-SR11 is very low. You decide to install a new 25GB disk named disk1 on MYSKILLS-SR11. You want to convert disk1 to five logical drives of equal size.You want to be able to increase the size of the logical drives in the future without affecting the data thatmay already be stored on it.

What should you do?

A. Create five NTFS primary partitions on disk1.

B. Create five NTFS extended partitions on disk1.

C. Convert disk1 from basic to dynamic and create one NTFS primary partition on

it. D. Convert disk1 from basic to dynamic and create five simple volumes on it.

Answer: D

QUESTION 2You work as the network administrator at MySkills.com. The MySkills.com network consists of a single ActiveDirectory domain named MySkills.com. The MySkills.com network contains ten Windows Server 2003computers and 1,400 Windows XP Professional client computers.

The MySkills.com network contains a database server named MYSKILLS-SR12.MYSKILLS-SR12 hosts an SQL 2000 Server accounting database application named AccountsDB. MySkills.com users in the Accounts department access the AccountsDB database on a regular basis. The files for the

AccountsDB database are stored on a RAID-1 volume. During routine maintenance, you notice that one of the disks in the RAID-1 volume has failed. You need to ensure that the RAID-1 volume is functional and that

no data has been lost.

What should you do?

A. Replace the failed disk on MYSKILLS-SR12 with a new disk and reboot the server.The RAID-1 volume will repair it self when MYSKILLS-SR12 reboots.

B. Break the RAID-1 volume. Replace the failed disk on MYSKILLS-SR12 with a new disk and initialize it.Then convert the new disk to a dynamic disk and recreate the RAID-1 volume.

C. Replace the failed disk on MYSKILLS-SR12 with a new disk. Then import the new disk and convert it toa dynamic disk.

D. Replace the failed disk on MYSKILLS-SR12 with a new disk and initialize it. Then convert the new disk toa dynamic disk and use the Repair Volume command to repair the RAID-1 volume.

Answer: B

QUESTION 3

You work as the network administrator at MySkills.com. MySkills.com has a small network that contains twoWindows Server 2003 computers and 12 Windows XP Professional client computers.

You are instructed to provide the MySkills.com network with Internet connectivity.You purchase a second Network Interface Card (NIC) and a cable modem. You install the second NIC onMYSKILLS-SR02 and attach the cable modem to the NIC. You then enable Internet Connection Sharing on



MYSKILLS-SR02. You later discover that MYSKILLS-SR02 is operating quite erratically and that the operatingsystem either stops responding or reboots unexpectedly. You need to ensure that MYSKILLS-SR02 operatescorrectly.

What should you do?

A. Enable Internet Connection Firewall on MYSKILLS-SR02.

B. Disable NetBIOS on the second NIC installed on MYSKILLS-SR02.C. Update the drivers for the second NIC installed on MYSKILLS-SR02.

D. Enable Network Address Translation (NAT) on MYSKILLS-SR02.

Answer: C


All the client computers of MySkills.com belong to the domain. MySkills.com contains a department, named

Finance. This department is crucial to MySkills.com. A MySkills.com user named Mia Hamm works on a client computer named MYSKILLS-WS150. Mia Hammreports that she no longer can log no to the domain. Each time Mia logs on to MYSKILLS-WS150 a messageis displayed that says that the user account has been disabled. You need to ensure that Mia can log on to thedomain.

What should you do?

A. On MYSKILLS-WS150, reset the user's password.

B. Unlock Mia Hamm's user account.

C. Instruct Mia Hamm to specify the user principle name in the logon

screen. D. Enable Mia Hamm's user account.

Answer: D

QUESTION 5You work as the network administrator at MySkills.com. The MySkills.com network consists of a single ActiveDirectory domain named MySkills.com. All servers on the MySkills.com network run Windows 2000 Server and all client computers run Windows XP Professional.

MySkills.com buys and sells computer software. Due to the prosperity of the business, the CEO has decided toexpand by adding a Development department to the company network. For future planning you have decidedto create an OU named MySkillsDevOU, which will contain all user and computer accounts in the Developmentdepartment. You know the statistics of the Development department, and want to test the computer accounts in

Active Directory.

What should you do?

A. Create the computer accounts in the default MySkillsOU and move the accounts to the MySkillsDevOU.

B. In the MySkillsDevOU, create the computer accounts.

C. Have users create the computer accounts when they join the domain.

D. From a user's client computer, create the computer account as the user joins the domain.

Answer: B



QUESTION 6You work as the network administrator at MySkills.com. The MySkills.com network consists of a single ActiveDirectory forest that contains three domains named MySkills-south.com, MySkills-north.com and MySkills-east. com. The domain functional level of MySkills.com is set at Windows 2000 native. All servers on theMySkills. com network run Windows 2003 and the client computers run Windows XP Professional.

MySkills.com consists of three departments, named Sales, Research and Marketing.These departments are crucial to the business operation at MySkills.com. All the client computers are dividedin the Sales, Research and Marketing department.Each department has its user accounts in its respective global group named:TK_Sales, TK_Research and TK_Market. These user accounts are used to assign permissions some of the local domain resources.

You were instructed to change the groups so that they can be directly be used in the DACLs of localdomain resources. The task must be done with the least amount of administrative effort.

What should you do?

A. Delete each group, and recreate each group using the universal scope.

B. Delete each group, and recreate each group using the domain local scope.

C. Open the properties of each group, and specify the scope of each group directly to domain local.

D. Open the properties of each group, and specify the scope of each group to universal, and then changethe scope to domain local.

Answer: D

QUESTION 7You work as the network administrator at MySkills.com. The MySkills.com network consists of a single ActiveDirectory domain named MySkills.com. All servers on the MySkills.com network run Windows 2000 Server and all client computers run Windows XP Professional.

The MySkills.com network contains a Development department which creates critical in-house applications.The department develops a critical in-house application which is used frequently by the users. Due to thesecurity of the company, the manager has instructed you to create several security groups. The securitygroups will be used to grant access to the critical in-house application. You have decided to configure thesegroupswith a domain local scope. You need to assign access to objects in the domain local groups.

Which of the following objects can you assign?

A. These objects can be assigned to resources located in all trusted forests.

B. These objects can be assigned to resources located only in local

domains.

C. These objects can be assigned to resources located in all domains in the forests.

D. These objects can be assigned to resources located in all domains in the forests or between trusted forests.

Answer: B

QUESTION 8You work as the network administrator at MySkills.com. The MySkills.com network consists of a single ActiveDirectory domain named MySkills.com. All servers on the MySkills.com network run Windows Server 2003and all client computers run Windows XP Professional. MySkills.com has its headquarters in Chicago and twobranch offices in Dallas and Miami.



MySkills.com consists of two departments, named Sales and Accounts. The Sales department is run in thebranch office. The Miami office is represented in the Active Directory as an OU named TKMiami. TheDallas office is represented in the Active Directory as an OU named TKDallas.

Due to the irreparable degrading state of the building, the CEO of MySkills.com is planning to close down toMiami branch office and transfer the employees to the Chicago office. You need to merge the two groupsinto one group named MySkillsSales.

Which Active Directory tools should you use?

A. Schema

B. Domains and Trusts

C. Sites and Services

D. Users and Computers

Answer: D

QUESTION 9You work as the network administrator at MySkills.com. The MySkills.com network consists of a single Active

Directory domain named MySkills.com. All servers on the MySkills.com network run Windows Server 2003and all client computers run Windows XP Professional.

The MySkills.com network contains a server named MYSKILLS-SR15. The server contains sensitive data andcritical third-party applications. The users of MySkills.com complain that they cannot access MYSKILLS-SR15.You assign a junior network assistant named Andy Reid to look at to the problem. Andy Reid reports that hedoes not have the required permissions to access security logs on MYSKILLS-SR15. You need to give AndyReid the minimum level of authority that he would require to view the security logs on MYSKILLS-SR15.

What should you do?

A. Assign the Allow-Full Control permissions for MYSKILLS-SR15 to Andy Reid.

B. Join Andy Reid domain user account to the Power Users group.

C. On the Manage By tab specify Andy Reid's user name on the Properties sheet.

D. Add Andy Reid's domain user account to the local administrators group on MYSKILLS-SR15.

Answer: D

QUESTION 10You work as the network administrator at MySkills.com. The MySkills.com network consists of a single ActiveDirectory domain named MySkills.com. All servers on the MySkills.com network run Windows Server 2003and all client computers run Windows 2000 Professional.

A MySkills.com user named Dean Austin's leave is due. During his vacation a new MySkills.com security

policy requires that all users must use smart cards to log on to a client computer and users using thepublicly accessible client computers must be logged off if the smart card is removed from the smart cardreader. You configure all user accounts to require smart cards for interactive logon except Dean Austin.

When Dean Austin came from vacation he was issued his smart card reader, from another administrator.When he tries to log on to his computer named MYSKILLS-WS124, he received the following message: thesystem cannot log you on to this domain because the system's computer account in its primary domain ismissing or the password in the account is incorrect. You need to troubleshoot the problem.

What should you do?



A. Add Dean Austin's smart card certificate to the computer account's name

mappings. B. Make sure that Dean Austin's computer account is enabled.

C. Add Dean Austin's principal name to the computer account's name

mappings. D. Make sure that the computer account of Dean Austin is trusted for

delegation.

Answer: B


The MySkills.com network contains a domain controller named MYSKILLS-DC04 and a file server namedMYSKILLS-SR13. MYSKILLS-SR13 contains all data applications and the backups of the client computerstaken on a weekly basis. A MySkills.com user named Amy Walsh's desktop computer goes in for repairs. Theyreplace her hard drive and restore all the data from a backup. When her computer comes back from repairs,

Amy Walsh tries to log on to the domain but is unable to do so. You have received instructions to investigatethe problem. When you examine the event log, you discover the following message: session setup from theMYSKILLS-DC04 failed to authenticate. The account named in the security database is MYSKILLS-DC04$.The following error occurred: access is denied. You need to ensure that Amy Walsh can log on to thedomain.

What should you do?

A. Rename MYSKILLS-DC04 to MYSKILLS-DC04$.

B. Disable and re-enable the computer account by using the DSMOD

command. C. Specify the Allow Log On Locally user right.

D. Reset the computer account.

Answer: D

QUESTION 12You work as the network administrator at MySkills.com. The MySkills.com network consists of a single ActiveDirectory domain named MySkills.com. All servers on the MySkills.com network run Windows Server 2003and all client computers run Microsoft Windows XP Professional.

MySkills.com contains a Finance department. Due to company growth, the COE has decided to employ 10temporary employees. You have received instructions to create several new user accounts. You then putthe accounts in a User container.The accounts are set to expire in two months time. On the last day of the two month period, the manager

named Rory Allen decides to keep one temporary employee named Andy Booth. When Andy Booth tries tolog on to the domain after the two month period, he receives the following error: Your account has expired.Please see your system administrator. You need to enable Andy Booth to log on to the domain.

What should you do?

A. Reset Andy Booth's password.

B. Set the Account Expiration option to Never.

C. Run the DSMOD command for Andy Booth and specify the -DISABLED NO

parameter. D. Delete and recreate Andy Booth's user account.

Answer: B



QUESTION 13You work as the network administrator at MySkills.com. The MySkills.com network consists of a single ActiveDirectory domain named MySkills.com. The MySkills.com network contains ten Windows Server 2003computers and 1,200 Windows XP Professional client computers.

MySkills.com consists of two departments named Sales and Finance. Due to company growth MySkills.comintends to hire 30 temporary employees. The company acquires 30 client computers that are issued to thetemporary employees.You install Windows XP Professional on the 30 client computers.

The MySkills.com working hours are from 8:00 AM to 5:00 PM. The CEO has instructed you to create user accounts by using a template account named _NewuserTemplate that defines common settings and groupmemberships for these user accounts. One of the new employees named Dean Austin complains that hecannot log on using his user account to the domain. He receives the following error message:

You need Dean Austin to log on to the domain. What should you do?

A. Extend the Logon Hours setting.

B. Extend the Account expires value.

C. Decrease Account lockout duration setting.

D. Increase Account lockout duration setting.

Answer: B

QUESTION 14You work as the network administrator at MySkills.com. The network consists of a single Active Directorydomain named MySkills.com. All servers on the MySkills.com network run Windows Server 2003 and allclient computers run Windows XP Professional.

A member server named MYSKILLS-SR05 is a file server that hosts a shared folder named FinanceData.

Only users that work in the Finance department must have permissions to modify the contents of the sharedfolder. The rest of the users on the network must be able to read the information in the financial files only.

You must ensure that all users in the Finance department are able to perform the following functions on theFinanceData shared folder:

1. Read files in FinanceData.2. Add files to FinanceData 3. Edit existing files in FinanceData.4. Delete files from the FinanceData.

You must also ensure that all other users only have permissions to read the contents of the files. You alsodo not want to grant the users in the Finance department more permissions than necessary to perform their specified duties.

What should you do?

A. Create a group named Finance.For FinanceData, grant the Finance group the Allow - Full Control share permission.

B. Create a group named Finance.For FinanceData, grant the Finance group the Allow - Change share permission

C. Create a group named Finance.For FinanceData, grant the Finance group the Allow - Read & Execute share permission.

D. Ensure that the Finance group has ownership of the folder and all files.



Answer: B


A member server named MYSKILLS-SR03 is a file server that hosts a shared folder named TKData. Youhave just recently created TKData on a NTFS drive on the server. Users must be assigned with permissionsto create subfolders within the TKData shared folder and create files within their respective subfolders.

You want to assign users with the permissions needed to create their own subfolders and then createfiles within their respective subfolders on the TKData shared folder.Users must also be allowed to assign permissions for only their own specific subfolders and associated files.

You must prevent the following from occurring:

1. No user must be able to create files directly in the TKData folder.2. No user must be able to assign permissions to a subfolder or files that is not their own.

You enable users to create subfolders in the TKData folder by assigning the Allow - Create Folders/AppendData permission with the scope defined as This folder only.

Which other permission should be granted to complete your task?

A. Grant the Users group the Allow - Modify permission on the TKData folder.

B. Grant the Network group the Allow - Full Control permission for subfolders and

files. C. Grant the Users group the Allow - Full Control permission for subfolders and

files.

D. Grant the Creators Owner group the Allow - Full Control permission for subfolders and files

Answer: D


The MySkills.com network contains a server named MYSKILLS-SR05.MYSKILLS-SR05 is the terminal server within the network. You receive instruction to create a new sharedfolder on a NTFS partition on MYSKILLS-SR05. Users will need to create subfolders within the new sharedfolder and create files within their respective subfolders. Users currently use Remote Desktop connectionsto access MYSKILLS-SR05.

You create a new folder named MySkillsData on MYSKILLS-SR05. You configure the MySkillsData folder sothat it inherits NTFS permissions from the root of the volume which you have created. All users that need tocreate subfolders and store files within their respective folders have user accounts in a group named Users.

You still need to perform the configuration which will enable users to create subfolders and store files withintheir respective subfolders. You do not want any user to be able to modify or delete another user'ssubfolders and files. You only want to assign users with the specific permissions needed to create their ownsubfolders and files within their respective subfolders.

What should you do?



A. Grant the Users group the Allow - Modify NTFS permission on the MySkillsData folder.

B. Grant the Users group the Allow - Change share permission on the MySkillsData folder.

C. Grant the Users group the Allow - Full Control NTFS permission on the MySkillsData folder.

D. The default inherited NTFS permissions are sufficient to meet your requirement. You have to donothing else.

Answer: D

QUESTION 17You work as the network administrator at MySkills .com. The MySkills .com network consists of a single ActiveDirectory domain named MySkills .com. The MySkills .com network contains 20 server computers and 2,500client computers.

All servers on the MySkills .com network run Windows Server 2003 and all client computers run Windows XPProfessional. All computers on the MySkills .com network are configured with static IP addresses in the10.20.30.0/8 network addressrange.Due to growth in the MySkills .com network you need to add another 20 server computers to the network. Youdeploy Windows Server 2003 to 20 new computers.You now want to configure static IP address for the new servers. You decide to use a batch file to

manually configure the IP addresses.What should you do?

A. Use the netsh interface ip set address command.

B. Use the rcp -interface command.

C. Use the netstat -s -p ip command.

D. Use the ipconfig /renew command.

Answer: A

QUESTION 18

You work as the network administrator at MySkills .com. The MySkills .com network consists of a single ActiveDirectory domain named MySkills .com. The MySkills .com network contains 10 server computers, 500portable client computers and 1,500 desktop client computers. All servers on the MySkills .com network runWindows Server 2003 and all client computers run Windows XP Professional. The MySkills .com network doesnot support remote access and is not connected to the Internet.MySkills .com users that are issued with portable client computers often work from home. When these userswork from home, they take their portable client computers home with them and connect it to their respectiveprivate home networks. You add a new Windows Server 2003 server named MySkills -SR11 on the MySkills .com network. You install and enable the DHCP Server service on MySkills -SR11.You configure all client computers on the MySkills .com network to receive their IP configurations from DHCPwhen they are connected to the corporate network. The next day several MySkills .com users that are issuedwith portable client computers complain that they are unable to connect to their respective private homenetworks.

You need to ensure that the portable client computers receive their IP configurations from DHCP when theyare connected to the corporate network and use static IP addresses when connected to the respective privatehome networks.What should you do?

A. Configure static IP addresses on the portable computers.

B. Configure DHCP address reservations for each of the portable computers.

C. Configure Automatic Private IP Addressing (APIPA) on the portable

computers. D. Configure the Alternate Configuration on the portable computers.



Answer: D

QUESTION 19You work as the network administrator at MySkills .com. The MySkills .com network consists of a single ActiveDirectory domain named MySkills .com and two subnets named SubnetA and SubnetB that are connected by arouter. All servers on the MySkills .com network run Windows Server 2003 and all client computers runWindows XP Professional. The MySkills .com network contains a DNS server named MySkills -SR33 and aDHCP server named MySkills -SR34 that are located on SubnetA. The MySkills .com network also contains aserver named MySkills -SR35 that functions as a DHCP relay agent and is located on SubnetB.

All client computers on the MySkills .com network are configured to receive their IP configurations from DHCPand all servers are configured with static IP addresses.The performance on MySkills -SR34 begins to deteriorate drastically. You determine that this deterioration iscaused by hard disk errors on MySkills -SR34. As MySkills -SR34 is scheduled for replacement in six monthstime, you cannot replace the hard disk. You decide to remove MySkills -SR34 from the network and toconfigure MySkills -SR35 as the DHCP server. You configure MySkills -SR33 as a DHCP relay agent. Youmust now configure the DHCP Server service on MySkills -SR35 as quickly as possible. You also want toensure that the new configuration does not cause disruption to the network.What should you do?

A. Backup all data on MySkills -SR34 and restore the data to MySkills -SR35.

B. Create new scopes on MySkills -SR35 that are identical to the scopes on MySkills -SR34.

C. Create new scopes on MySkills -SR35 that are different from the scopes on MySkills -SR34.

D. Use the Netsh utility to migrate the DHCP database from MySkills -SR34 to MySkills -SR35.

Answer: D

QUESTION 20You work as the network administrator at MySkills .com. The MySkills .com network consists of a single ActiveDirectory domain named MySkills .com. The MySkills .com network is divided into three subnets namedSubnetA, SubnetB, and SubnetC that are connected by two BOOTP routers. Each subnet contains 4 serversand 250 client computers. All servers on the MySkills .com network run Windows Servers 2003 and all client

computers run Windows XP Professional client computers.The MySkills .com network contains a DNS server named MySkills -SR03 that provides name resolution for the entire network and a DHCP server named MySkills -SR04. Both MySkills -SR03 and MySkills -SR04 arelocated in Subnet A. MySkills -SR04 is configured with a separate scope for each subnet.The scope for SubnetA is named ScopeA and contains the IP addresses 192.168.1.5 through192.168.1.254; the scope for SubnetB is named ScopeB and contains the IP addresses 192.168.2.5 through192.168.2.254; and the scope for SubnetC is named ScopeC and contains the IP addresses 192.168.3.5through192.168.3.254. All scopes have the default subnet mask. All servers are configured with static IPaddresses and all client computers are configured to receive the TCP/IP configurations from MySkills-SR04.MySkills .com hires 25 new employees. The client computers for the new employees will be added to SubnetC.You need to configure the scope for SubnetC to support the additional client computers. You decide to create anew scope named ScopeC(2) with the IP addresses 192.168.4.5 through 192.168.4.30 and a subnet mask of 255.255.255.0 and combine ScopeC and ScopeC(2) in a superscope namedSuperC. You want to use a single port on the router as your gateway.What should you do?

A. Define 192.168.3.1 as the default gateway for ScopeC and 192.168.4.1 as the default gateway for ScopeC (2).

B. Define 192.168.3.1 and 192.168.4.1 as the default gateways for

SuperC. C. Define 192.168.3.1 as the default gateway for ScopeC(2).

D. Define 192.168.4.1 as the default gateway for ScopeC.

Answer: A



QUESTION 21You work as the network administrator at MySkills .com. The MySkills .com network consists of a single ActiveDirectory domain named MySkills .com.

A MySkills .com user, named Clive Wilson,reports that he is unable to access a share that a colleague hasconfigured on a computer named MySkills -WS020.Clive Wilson is currently logged on to a Windows XP Professional computer named MySkills -WS025.You confirm that the share is correctly configured on MySkills -WS020 and that the Everyone group has Readaccess for the share. You then run ipconfig and determine that the IP address on MySkills -WS025 is169.254.10.28 with a subnet mask 255.255.0.0 What is the most likely reason for Clive Wilson being unableto access the share?

A. The subnet mask is incorrectly configured on MySkills -WS025.

B. The user is logged on with a domain account instead of a local

account. C. A DHCP server is not available.

D. The default gateway is incorrectly configured on MySkills -WS020.

Answer: C

QUESTION 22

You work as the network administrator at MySkills .com. The MySkills .com network consists of a single ActiveDirectory domain named MySkills .com. The MySkills .com network contains a Dynamic Domain NameSystem (DDNS) server named MySkills -SR04 and a File Server named MySkills -SR05.MySkills -SR04 uses the IP address 192.168.2.163/27 and MySkills -SR05 uses the IP address192.168.2.165/27.Your Windows XP Professional client computer is named MySkills -WS013.MySkills -WS013 is configured with the IP address 192.168.2.159/27 and a gateway address of 192.168.2.129/27. You are unable to connect to a MySkills -SR05. You need to access files on MySkills -SR05.What should you do?

A. Change the IP address on MySkills -SR04 to 192.168.2.165.B. Change the IP address on MySkills -WS013 to 192.168.2.158.

C. Change the IP address on MySkills -SR05 to 192.168.2.129.

D. Change the gateway address on MySkills -WS013 to 192.168.2.163.

Answer: B

QUESTION 23You work as the network administrator at MySkills .com. The MySkills .com network consists of a single ActiveDirectory domain named MySkills .com that has two subnets named SubnetA and SubnetB. The two subnetsare connected by a router. All servers on the MySkills .com network run Windows Server 2003 and all client

computers run Windows XP Professional. The MySkills .com network contains a server named MySkills -SR17 that provides the DNS and DHCP server services. All client computers are configured to receive their IP configurations from DHCP. MySkills -SR17 is located on SubnetA while the client computers are locatedon SubnetB. A server named MySkills -SR18 is configured as a DHCP Relay Agent and is located onSubnetB. You install a new DNS server named MySkills -SR19 on SubnetB. To reduce network trafficbetween the two subnets, you want all client computers on SubnetB to use MySkills -SR19 for nameresolution. You create a client reservation for MySkills -SR19 in the scope for SubnetB and you replace theDNS server address in the options of the scope for SubnetB with the IP address you reserved for MySkills-SR19.Later, during routine maintenance on the outer you discover that DNS queries are still being forwarded toMySkills -SR17. You need to ensure that client computers on SubnetB use MySkills -SR19 as its DNS server.What should you do?



A. Force all client computers to renew their IP leases from MySkills -SR17.

B. Reduce the lease duration of the DHCP scope for Subnet B.

C. Configure the router to block DNS traffic.

D. Ensure that the client computers do not have a DNS server address configured in the DNS tab of the Advanced TCP/IP Settings page.

Answer: D

QUESTION 24You work as the network administrator at MySkills .com. The MySkills .com network consists of a single ActiveDirectory domain named MySkills .com. All servers on the MySkills .com network run Windows Server 2003and all client computers run Windows XP Professional.The MySkills .com network contains five domain controllers running DNS Server that are named MySkills -DC01, MySkills -DC02, MySkills -DC03, MySkills -DC04, and MySkills -DC05. Each of these domaincontrollers hosts an Active Directory-integrated DNS zone for the MySkills .com domain.

After installing DNS Server on a new member server named MySkills -SR06, you configure it to host asecondary zone for the MySkills .com domain.You need to ensure that MySkills -SR06 is designated as an authoritative server for the MySkills .com domain.

You start by opening the Properties sheet on one of the domain controllers.What should you do NEXT?

A. Access the WINS tab.

B. Access the Zone Transfers tab.

C. Access the Start of Authority (SOA) tab.

D. Access the Name Servers tab.

Answer: D

QUESTION 25

You work as the network domain administrator at MySkills .com. The MySkills .com network consists of asingle Active Directory forest named MySkills .com. The MySkills .com network contains ten Windows Server 2003 Standard Edition computers and 1,200 client computers running Windows XP Professional.Part of your job description includes the management of security related settings and computer accounts inthe domain. You need to configure settings that are related to passwords, account lockout, and Kerberos. Thiscustom security template will be imported into a Group Policy Object (GPO) that is linked to the domain.Which security template node will you use to accomplish the task?

A. The Event Log node.

B. The Local Policies node.

C. The Account Policies node.

D. The Restricted Groups node.

Answer: C

QUESTION 26You work as a network domain administrator at MySkills .com. The MySkills .com network consists of a single

Active Directory domain named MySkills .com. All servers on the MySkills .com network run Windows Server 2003 and all client computers run Windows XP Professional.Several backup jobs have been configured on a server named MySkills -SR24.These backup jobs are meant to backup the business data on the file servers. Your job description includesthe management of backup jobs. You configure these backup jobs to run under the security context of your user



account.The backup jobs are run successfully. However, one morning, after several weeks, you discover that noneof the jobs are operational. You received instruction to determine the reason why the backup jobs are nolonger running.What would be the most probable cause of the problem?

A. Your user account does not have Backup Operators group membership on MySkills -SR24.

B. Your user account password has expired.C. Your user account has been disabled due to a breach in security.

D. Your user account password does not meet with the password complexity requirements.

Answer: B

QUESTION 27You work as the network administrator at MySkills .com. The MySkills .com network consists of a single ActiveDirectory domain named MySkills .com. The MySkills .com network contains ten Windows Server 2003computers and 1,200 client computers running either Windows XP Professional or Windows 2000Professional. A MySkills .com company policy states that all computes should be kept up to date with theService Packs that Microsoft makes available on the Microsoft Updates Web site. Upon routine maintenance

on the network you notice that none of the client computers have been updated with the latest Service Packsthat are available on the Microsoft Updates Web site. You need to address the issue.To simplify the process of deploying all the operating system updates to the client computers, you plan to usea server named MySkills -SR06 as a Software Update Services (SUS) server.What should you prior to installing SUS on MySkills -SR06?

A. Create and configure History.sync.xml and History.approve.xml on MySkills -SR06.

B. Install DNS server on MySkills -SR06.

C. Install IIS on MySkills -SR06.

D. Install Service Pack 1 on the Windows XP Professional client computers and Service Pack 2 on theWindows 2000 Professional client computers.

Answer: C

QUESTION 28You work as the network administrator at MySkills .com. The MySkills .com network consists of a single ActiveDirectory domain named MySkills .com. The MySkills .com network contains ten Windows Server 2003computers and 1,200 client computers running a mix of Windows XP Professional and Windows 2000Professional. MySkills .com security policy dictates that all network traffic should be encrypted.To comply with the MySkills .com security policy, you implement the Secure Server IPSec policy for theDomain Controllers security policy. You also implement Client IPSec policy for each of the MySkills .comdepartmental Organizational Units (OUs). Soon after these implementations, the MySkills .com helpdesk wasinundated with calls from users complaining that they are unable to log in to access network resources.You received instruction to ensure that all MySkills .com users are allowed to access resources.

What should you do?

A. All the Windows 2000 Professional client computers should be upgraded to Windows XP

Professional. B. Do nothing.

C. The MySkills .com departmental OUs' Group Policies should be changed to Secure Server.

D. All Windows 2000 Professional client computers must be installed with Directory Service Client Software.

Answer: B



QUESTION 29You work as the network administrator at MySkills .com. The MySkills .com network consists of a single ActiveDirectory domain named MySkills .com. All servers on the MySkills .com network run Windows Server 2003and all client computers run Windows XP Professional.Part of your job description includes the monitoring of the network performance and capacity. You are in theprocess of using Remote Desktop connection to connect to all the servers and run the required counter logs. You have received instruction from the CIO to ensure that you make the HTML files with the counter setting available when using Remote Desktop connections without affecting the way network servers aremanaged. What should you do?

A. In a GPO the drive redirection must be configured in a user policy.Then apply the GPO to the proper user account.

B. In the Remote Desktop connection properties drive redirection should be

configured. C. In a GPO the drive redirection must be configured in a user policy.Then apply the GPO to your computer.

D. In a GPO the drive redirection must be configured in a user policy.Then apply the GPO to the server.

Answer: B

QUESTION 30You work as the network administrator at MySkills .com. The MySkills .com network consists of a single ActiveDirectory domain named MySkills .com. All servers on the MySkills .com network run Windows 2000 Server and all client computers run Windows XP Professional.MySkills .com consists of two departments, named Research and Marketing. Half of the client computers arein the Research department and the other half is in the Marketing department. The Research department isa priority for MySkills .com.MySkills .com contains a server named MySkills -SR23 which hosts critical third-party applications.During routine monitoring you discover that the Hypertext Transfer Protocol Secure Socket Layer (HTTP SSL)is disabled. You have received instructions to document MySkills -SR23's configurations for which it should beenabled.For HTTP SLL to run, which services are needed?

A. Application Layer Gateway Service

B. WebClient Service

C. World Wide Web Publishing Service

D. IIS Admin Service

Answer: C

QUESTION 31

What file should be edited to make the system aware of newly added library files?

A. /etc/modules.conf B. /etc/conf.modules

C. /etc/ld.so.conf

D. /etc/ld.so.cache

Answer: C

QUESTION 32

Incremental upgrades of the kernel are distributed as



A. patches.

B. fixes.

C. hotfixes.

D. service packs.

Answer: A

QUESTION 33Which bootloader can lie to Windows and make Windows believe that it's installed on the first partition evenif it's not?

A. GRUB

B. XLoad

C. LILO

D. FILO

Answer: A

QUESTION 34You need to change the default runlevel. Which file do you need to edit? (Write the full path includingthe filename)

A. /etc/init.d

B. /etc/init-table

C. /etc/inittab

D. /etc/init

Answer: C

QUESTION 35You need to print 12 copies of the document foo.txt. Which of the following commands would you use?

A. cat foo.txt | lpr -#12

B. cat foo.txt > lpr -#12

C. cat foo.txt | lpr -12

D. cat foo.text > lpr -12

Answer: A

QUESTION 36

The directory location /usr/share/doc contains what files?

A. All documentation created from application source code.

B. All documentation you wish to share with other users.

C. Supplemental information about installed packages.

D. Programs for reading documentation.

Answer: A



QUESTION 37Which directory tree is ordinarily the least likely to be backup or restore?

A. /tmp

B. /var C. /proc

D. /usr

Answer: C

QUESTION 38Which protocol is used for the majority of the ping command'sactions?

A. ICMP

B. UDPC. TCP

D. NDP

Answer: A

QUESTION 39Which of the following options will speed up traceroute for distant networkqueries?

A. -n

B. -p

C. -0

D. -t

Answer: A

QUESTION 40Your server logfile shows repeated connections to TCP port 143, what service is beingaccessed?

A. smtp

B. imap

C. pop3

D. pop2

Answer: B

QUESTION 41The is used by the local host to determine which hosts are on the local subnet, and which hosts are onremote networks.

A. DNS

B. ARP

C. gateway



D. netmask

Answer: D

QUESTION 42What is a well-known service that binds port 25 and is it required on all

hosts?

A. SNMP and it should be turned off if not needed.

B. SMTP and it is a required service.

C. SMTP and it is only required on MX hosts.

D. SLPD and it is required if you run LDAP services.

Answer: C

QUESTION 43You have replaced inetd with xinetd. What must be done after installing to ensure that your machine will

work correctly?

A. You must add a symbolic link from inetd.conf to xinetd.conf.

B. You don't have to do anything because they are compatible.

C. You must create a new configuration file for xinetd.

D. You must run xinetd-configure first.

Answer: B

QUESTION 44You have a standard Apache web server installation and want to make it respond to requests on port 8088.To do this, what configuration file do you need to change?

A. None. This is the default port.

B. /etc/httpd/apache.conf

C. /etc/httpd/ports.conf

D. /etc/httpd/httpd.conf

Answer: D

QUESTION 45Which Apache Directive specifies the location of the HTTPdocuments?

A. RootDocument

B. ServerRoot

C. DocumentRoot

D. RootServer

Answer: C

QUESTION 46

What command is used to monitor connections to the SMBserver?



A. smbclient

B. testparm

C. smbstatus

D. smbstat

Answer:C

QUESTION 47

Which daemon allows Linux to share its file systems and printers with unmodified Windows clients?

A. X Window

B. nmbd

C. smbd

D. WINS

Answer: C

QUESTION 48

What file determines the DNS servers used by your computer?

A. /etc/hosts

B. /etc/named.conf

C. /etc/nsswitch.conf

D. /etc/resolv.conf

Answer: D

QUESTION 49Which of the following services would you be least likely to configure to be governed over by the Internet Super Server?

A. ftp

B. telnet

C. ssh

D. finger

Answer: C

QUESTION 50While troubleshooting a connectivity problem on the network, you issue the ping command from your PCcommand prompt, but the output shows "request times out."

At which OSI layer is this problem associated with?

A. The data link layer

B. The application layer

C. The access layer

D. The session layer



E. The network layer

Answer: E

QUESTION 51 A host computer has been correctly configured with a static IP address, but the default gateway is

incorrectly set. Which layer of the OSI model will be first affected by this configuration error?

A. Layer 1

B. Layer 2

C. Layer 3

D. Layer 4

E. Layer 5

F. Layer 6

G. Layer 7

Answer: C

QUESTION 52Which protocol below uses TCP port 443 at layer 4?

A. HTML

B. HTTPS

C. TFTP

D. Telnet

E. SMTP

Answer: B

QUESTION 53 A receiving host has failed to receive all of the segments that it shouldacknowledge. What can the host do to improve the reliability of this communicationsession?

A. Start a new session using UDP

B. Obtain a new IP address from the DHCP server

C. Use a different source port for the session

D. Decrease the sequence number

E. Decrease the window size

Answer: E

QUESTION 54 A MySkills technician is troubleshooting connectivity problems between two routers that are directly connectedthrough the serial line. The technician notices that the serial line is up but cannot see any neighbors displayedin the output of the show cdp neighbors command.In which OSI layer is the problem most likely occurring?

A. Physical



B. Data link

C. Network layer

D. Transport layer

E. Application layer

Answer: B

QUESTION 55You want to upgrade the MySkills LAN so that all ports operate in full duplex mode. Which statement is trueabout full-duplex Ethernet when comparing to half-duplex Ethernet?

A. Full-duplex Ethernet consists of a shared cable segment. Half-duplex provides a point-to-point link

B. Full-duplex Ethernet uses two wires to send and receive. Half-duplex Ethernet uses one wire to sendand receive

C. Full-duplex Ethernet can provide higher throughput than can half-duplex Ethernet of the same

bandwidth D. Full-duplex Ethernet uses a loopback circuit to detect collisions. Half-duplex Ethernet uses a

jam signal E. None of the above

Answer: C

QUESTION 56

Assuming you build networks to exact specifications, what is the recommended maximum length a 10BaseTcable can be before it has to be segmented or repeated?

A. 100 meters

B. 100 feet

C. 100 yards

D. 200 meters

E. None of the above

Answer: A

QUESTION 57Which of the following are true of Ethernet technology?

A. Hosts use a logical ring topology.

B. Hosts use a logical bus topology

C. Hosts must wait for an electronic signal to transfer data.

D. Hosts are directly connected to a wiring concentrator called a MSAU.


Answer: B

QUESTION 58 A MySkills Ethernet switch receives a unicast frame with a destination MAC that is listed in the switch table.What will this switch do with the frame?

A. The switch will forward the frame to a specific port



B. The switch will forward the frame to all ports except the port on which it was received

C. The switch will return a copy of the frame out the source port

D. The switch will not forward unicast frames

E. The switch will remove the destination MAC from the switch table

F. None of the above.

Answer: A

QUESTION 59While troubleshooting a connectivity problem, the MySkills network administrator notices that a port status LEDon a Cisco Catalyst Series switch is alternating between green and amber. Which condition could this indicate?

A. The port is experiencing errors

B. The port has ac active link with normal traffic activity

C. The port blocked by spanning tree

D. The port is administratively disabled


Answer: A


The MySkills.com network contains a server named MYSKILLS-SR18.MYSKILLS-SR18 has a single 120 GB hard disk drive named Disk0. Disk0 has been initialized as a basicdisk and has been formatted with NTFS. The hard disk is partitioned into four logical partitions as shown inthe following table:

DriveContentsSizeFree Space CSystem Volume8 GB4 GB DApplication Data40 GB1 GB EUser Data40 GB12GB FNone32 GB32 GB

Drive D is becoming full. You need to increase the disk space for the applications data. However,the application on Drive D cannot be reconfigured to use free space from another volume.

What should you do?

A. Extend Drive D to include Drive F.

B. Mount Drive F in an empty folder on Drive D.

C. Extend Drive F to include Drive D.

D. Delete Drive F, and then extend Drive D.

Answer: B

myskills 2011 itpc teori akhir

Documents