acoples para vacio

(800)845-4424(253)735-9115

fax (253)735-0437www.torrtech.com

QUICK-DISCONNECTS

Prices shown are in US dollars Prices subject to change without notice

1

TORR TECHNOLOGIES INC

PRICE LISTDecember 2011

1435 22ND ST NW AUBURN WA 98001

GENERAL INFORMATION

The plug, or nipple, is the male half of thequick-disconnect. The coupler, which hasthe sliding collar, is the female half.

All quick-disconnects described here havechemical and heat-resistant Viton™ sealsrated to 400°F continuous.

In the QD10 model, both the plug andcoupler are available with male or femalepipe threads.

The QD11 is available with female threadsonly. A hex nipple (wrench hex in center ofthreads) or close nipple (continuous thread,no hex in center) is available (see below).

1/4” npt: male thread OD ~ .52”fem. thread ID ~ .44”



Pipe Thread Sizes

Use the followingdimensions todetermine what sizefitting you require:

Hex nipples available in combination sizes, i.e. 1/2” x 1/4”, both brassand steel. Torr stocks a variety of brass, steel, and stainless steel fittingsin addition to what’s shown here. Please call us with your requirements.

FITTINGS

DESCRIPTION PART # EACH

E23325X4E23325X623325X8

246X088266X100286X112

1/4” hex nipple, brass3/8” hex nipple, brass1/2” hex nipple, brass

1/4” close nipple, brass3/8” close nipple, brass1/2” close nipple, brass

$1.352.05

3.25

1.301.552.50

1/4” hex nipple, steel3/8” hex nipple, steel1/2” hex nipple, steel

911-4-4911-6-6911-8-8


$ 1.451.55

2.40

© 2011 TORR TECHNOLOGIES INC

QD10 SERIES

QD11 SERIES

Heat-treated zinc dichromate-plated steelor stainless steel.Viton seals, 400°F continuous.Stocked in 1/4” and 1/2”. 3/8” available.

A1/4, A=.48”3/8, A=.58”1/2, A=.70”

A1/4, A=.56”3/8, A=.75”1/2, A=.92”

Specifically manufactured for vacuum and mediumpressure service.Both plug and coupler internally valved for instantflow on connect, positive shut-off on disconnect.

Measure diameter of nipple to determine size of an existing fitting


Plug, 1/4” fem NPTPlug, 3/8” fem NPTPlug, 1/2” fem NPTPlug, 1/4” fem NPT, stainlessPlug, 1/2” fem NPT, stainless

100504100506100508108504108508

$ 15.3518.3520.3538.3069.65

100504

Plug, 1/4” male NPTPlug, 3/8” male NPTPlug, 1/2” male NPTPlug, 1/4” male NPT, stainlessPlug, 1/2” male NPT, stainless

100514100516100518108514108518

$ 15.9019.0521.2043.9583.45

100514

Coupler, 1/4” male NPTCoupler, 3/8” male NPTCoupler, 1/2” male NPTCoupler, 1/4” male NPT, stainlessCoupler, 1/2” male NPT, stainless

101514101516101518109514109518

$ 22.5029.7532.0560.65

115.05

101514


Coupler, 1/4” fem NPTCoupler, 3/8” fem NPTCoupler, 1/2” fem NPTCoupler, 1/4” fem NPT, stainlessCoupler, 1/2” fem NPT, stainless

101504101506101508109504109508

$ 21.9029.0031.2054.95

101.30101504

Measure diameter of nipple to determine size of an existing fitting

Heat-treated zinc dichromate-plated steelor stainless steel.Viton seals, 400°F continuous.Stocked in 1/4”, 3/8”, and 1/2”.

Specifically manufactured for vacuum and mediumpressure service.Both plug and coupler internally valved for instantflow on connect, positive shut-off on disconnect.

110504


Plug, 1/8” fem NPTPlug, 1/4” fem NPTPlug, 3/8” fem NPTPlug, 1/2” fem NPTPlug, 1/4” fem NPT, stainlessPlug, 3/8” fem NPT, stainlessPlug, 1/2” fem NPT, stainless

110502110504110506110508118504118506118508

$ 5.305.907.107.75

14.0523.1036.60 110504


Coupler, 1/8” fem NPTCoupler, 1/4” fem NPTCoupler, 3/8” fem NPTCoupler, 1/2” fem NPTCoupler, 1/4” fem NPT, stainlessCoupler, 3/8” fem NPT, stainlessCoupler, 1/2” fem NPT, stainless

111502111504111506111508119504119506119508

$ 13.1012.4515.5519.6533.7547.4077.90

Printed on recycled paper

(800)845-4424(253)735-9115


VACUUM PROBES





VACUUM HOSE

Our vacuum hose assemblies are made in-house so lead times are short.We request 1 day for VH20 and VH22, and 2-3 days for welded VH23 &VH24 assemblies. Same day service available.

VH22 3/8" ID autoclave/oven vacuum hose $ 8.90 / ft.

• Max. temp: 400°F (204°C) continuous• 150 psi external to 100 psi internal pressure• Aramid fiber-reinforced silicone construction• Stainless steel liner• .375” ID x .700” OD• End fittings: NPT, SAE, JIC

VH22 AUTOCLAVE/OVEN

• Max. temp: 1000°F (538°C) continuous• 200 psi external• 100% stainless steel construction• .375” ID x .630” OD• Price includes 1/4” male NPT ends• End fittings: NPT, JIC, BSPT

VH23 AUTOCLAVE/OVEN

JIC

$ 14.80 / ft.

VH23 and VH24 have no outer braiding that can fray. The annulur corrugationsprovide good flexibility and prevent damage to molds and vacuum bags. VH24 hasmore corrugations per inch than the VH23 and is significantly more flexible.

VH23 SS flex autoclave/oven vacuum hose $ 10.70 / ft.

VH24 SS hi-flex autoclave/oven vacuum hose

VH24 AUTOCLAVE/OVEN • Max. temp: 1000°F (538°C) continuous• 1000 psi external• 100% stainless steel construction• .375” ID x .630” OD• Price includes 1/4” male NPT ends• End fittings: NPT, JIC, BSPT

VH23 / VH24 optional ends

• Price per foot includes 1/4” male npt fittings• There is a minimum 3’ charge per hose

Complete assemblyTopBaseGasket

$ 18.809.258.602.50

1/4-turn machined aluminumvacuum probe with round base, 1/4”male npt, wrench flats, non-pinchbase design. Complete assemblyincludes top, base, and gasket.

304114304000000110000004

304114 STANDARD 1/4”


$ 23.8013.809.202.75

1/4-turn machined aluminumvacuum probe with round base, 1/2”male npt, wrench flats, non-pinchbase design. Complete assemblyincludes top, base, and gasket.

308228308000000220000008

308228 STANDARD 1/2”

Complete assembly $ 11.60

Stainless steel high-flow cover installs overvacuum ports in molds and tooling. Fitsover holes up to 3/8” npt. Attaches with 2stainless steel drive screws (included).Unique design does not hinder flow.

377000

377000 PORT COVER

Complete assemblyGasket

$ 10.902.40

Small footprint machined aluminum port forinstalling in elastomeric and plastic filmvacuum bags. 1.25” hex body helps withfitting installation

364000360004

364000 ELASTOMERIC

Complete assembly $ 27.90

Nickel-plated 1/4” male npt steel port forinstalling through molds and plates from .25”to 1.13” thick. .55” diameter, 90°counter-sunk head, 2.50” long overall. Includes body,o-ring, washer, spring washer, & nut.

374000

374000 THRU-TOOL


$ 58.6037.4020.902.50

Vacuum probe with rotating cam. Canbe used without gasket for 1000°F use.Compound action applies higherpressure than 1/4 turn style. 1/4” malenpt, wrench flats, non-pinch base design.

334664334000000660000004

334664 CINCH - STAINLESS

PART NO.

LENGTH IN FEET

example: 22 06 64denotes 6 ft.For inch lengths,separate withhyphens.Example: 22-42-64denotes 42”

HOSE ID

4 -1/4”6 -3/8”8 -1/2”

20 12 6 4 - 4/90

HOSE TYPE

20222324

END FITTING

4 -1/4” male NPT4/90 -1/4” male NPT 90°elbow6 -3/8” male NPT6/90 -3/8” male NPT 90°elbow8 -1/2” male NPT8/90 -1/2” male NPT 90°elbow4FNPT - 1/4” fem NPT6FNPT - 3/8” fem NPT8FNPT - 1/2” fem NPT4SAE - 1/4” fem SAE swivel6SAE - 3/8” fem SAE swivel8SAE - 1/2” fem SAE swivel4JIC - 1/4” fem JIC swivel6JIC - 3/8” fem JIC swivel8JIC - 1/2” fem JIC swivel4BSPT - 1/4” male BSPT

this number required only ifdifferent from other fitting

TO DETERMINE PART NUMBERUse this chart, or call and specify type, ID,length, and required end fittings.

EXAMPLE: p/n 221064-4/90VH22, 10 ft, 3/8” ID, 1/4” male NPT x 1/4” 90°male npt

HOSE REPAIRVH22: $12.00/end. VH23 & VH24: $19.00/end.Hose testing: $10.00/hose (applied towards repair charge).Resin-filled hoses are not repairable.

NPT

2


$ 22.459.25

12.602.50

304124304000000120000004

304124 RECT. BASE1/4-turn machined aluminumvacuum probe with rectangularbase. Allows installation after sealingbag. 1/4” male npt, wrench flats,non-pinch base design.


$ 30.2521.608.602.50

Vacuum probe with rotating cam foradapting to various material thicknesses.Compound action applies higher pressurethan 1/4 turn style. 1/4” male npt, wrenchflats, non-pinch base design.

324114324000000110000004

324114 CINCH - ALUMINUM

Price includes 1/4” male NPT fittings. Add $1.00 per 1/4” female NPT end.Add $2.00 per 90°end. Add $2.00 per 3/8”, 1/2”, and non-NPT end.

VH20 1/4” ID room-temp vacuum hoseVH20 3/8” ID room-temp vacuum hoseVH20 1/2” ID room-temp vacuum hose

$ 3.85 / ft.4.35 / ft.5.70 / ft.

• 1/4” & 3/8” rated 170°F (88°C), full vacuum• 1/2” rated 140°F (60°C), full vacuum• Double-reinforced, solvent-resistant covering• Available in 1/4”, 3/8”, and 1/2” ID• End fittings: NPT, SAE, JIC

The VH20 combines durability, flexibility, flow,collapse-resistance, safety, & economy into abright yellow, easily identifiable vacuum hose.

VH20 ROOM TEMP

Price includes 1/4” male NPT fittings, straight or 90°elbows.For 3/8”, 1/2”, and non-NPT end fittings, add $2.00 per end.

Complete assemblyBodyKnurled NutWasherGasket

$ 36.7521.056.907.202.70

Hard-anodized machinedaluminum port, 1/4” malenpt, wrench flats. Completeassembly includes body, nut,washer, and gasket.

353444353001353002353003353004

353444 4-PIECE

1.50” dia. x 1.14” tall

2.38” dia. x 1.65” tall

1.24” x 3.50” x 1.61” tall

2.38” dia. x 1.82” tall2.38” dia. x 1.90” tall

1.50” dia. x .18” tall

2.74” dia. x 1.85” tall

2.38” dia. x 1.90” tall


The flexible VH22 has a resilient outer covering thatprevents bag punctures, mold damage, and injuries to users.Aramid reinforcement is superior to glass and dacron.

JIC

NPT

3/8” male NPT

1/2” male NPT

1/4” fem JIC

3/8” fem JIC

1/2” fem JIC

$6.00/end7.00/end

23.00/end24.00/end26.00/end

90°elbow, 1/4” male NPT



1/4” fem NPT

3/8” fem NPT

1/2” fem NPT

$27.80/end42.20/end64.10/end21.00/end34.00/end40.00/end

Complete assemblyTopBase onlyBase with o-ring & filterGasketO-ringFilter

$ 33.109.25

17.6024.202.502.104.90

1/4-turn machined aluminum vacuumprobe with filtered base, 1/4” male npt,wrench flats. Complete assembly includestop, base, filter, o-ring, and gasket.

304334304000000330000336000004000015000016

304334 FILTERED

2.74” dia. x 1.85” tall

Patented high-strength silicone rubber sheeting withmolded channels to create diaphragm with integralbreathing. Interflow is commonly used in compaction tablesand other applications where part markoff is not a concern.

EXTRUSIONS - SILICONE

(800)845-4424(253)735-9115






SILICONE RUBBER SHEET & EXTRUSION

HIGH-STRENGTH SHEETING

Uncured is interleaved with polyethylene and requires care when unrolling.Instructions are provided. Packaged in wood crate for protection.

INTERFLOW™ COMMERCIAL GRADE SHEETINGSOLID & SPONGE

Commercial grade silicone rubber is used for a varietyof applications such as caul pads, pressure intensifiers,shock absorption, gaskets, and items not requiring hightear and tensile strength. Please call for pricing.• Custom die cutting and perforating available.Width: 36” & 48” (limited stock)SOLID hardness (Shore A): 40, 50, & 60SPONGE density: soft, medium, firmColor: red & gray (limited)SOLID finish: light fabric or smoothReinforced solid available

ENVELOPE SEALTriangle seal with insert

870000 $ 8.40 /ft.

SMALL SEAL.63” H. x .75” W. triangle

870800 $ 5.50 /ft.

MEDIUM SEAL.88” H. x .88” W. triangle

871000 $ 6.40 /ft.

LARGE SEAL1.25” H. x 1.38” W. triangle

871200 $ 11.10 /ft.

RIGHT TRIANGLE (90°)FAIRING BAR50 Duro (A) silicone

We have limited stock of tubing and shapes not shown here and we custom-extrude solid and hollow profiles

3

Interflow™ Strip

VACUUM PUMPS, GAUGES, MANIFOLDS

DIAPHRAGM VACUUM PUMP• 25.5” Hg, 1.3 CFM free-flow• 1/8 hp, 120 VACThis extremely quiet, oil-free pumpincludes handle, feet, gauge, andside-mounted switch.

501120 $ 482.00

51XXXXINDUSTRIAL ROTARY VANEVACUUM PUMP SYSTEMS

Vacuum levels to29.9” Hg.6 to 25 hp7 to 918 ACFM120 to 480 VAC1 & 3 phaseDIN motor starterHigh-flow polyesteror carbon filterAdjustable vacuumswitch20 to 250 galhorizontal or 80 galvertical tanks

Please call for pricing

VACUUM GAUGES

• Anodized aluminum• 3/8” npt end ports, 1/4” npt side ports

• 1.5” between ports

TM SERIES

27.1” Hg ultimatevacuumAll-pneumaticoperation, noelectricity requiredOperates on 50 psicompressed airMakes an excellentback-up pump

Includes 4-port manifold, filter, vacuum gauge,on-off-auto switch, adjustable vacuum switch,and filter-regulator for incoming air.

TM25TM50TM100

MODEL AIR USE(cfm)

FLOW @0” Hg

PRICE

4.08.016

132232

$ 1360.001464.001690.00

VENTURIVACUUM PUMPS 8990471

• 2.5” dia.• Plastic case• Dry$ 19.90

9767002• 2.5” dia.• SS case, wet• high accuracy$ 29.85

MANIFOLDS

4-PORT6-PORT8-PORT

MM-210MM-320MM-420

$ 27.5031.8036.10

Hardness (Shore A)Tensile strength (psi)

Tear strength (ppi)Mod.@ 25% elong. (psi)Mod.@ 50% elong. (psi)

Mod.@100% elong. (psi)Mod.@300% elong. (psi)

Elongation at break (%)Specific gravity

Compression set (%)(22 hrs @ 350°F)

Color

501400250

791201814648941.15

21

gray

SPECIFICATIONS

521700

2801001722935159001.11

17

trans.

301500 207

5273

1123249001.10

17

gray

401860

25058

101148304

13001.11

16

trans.

351548256

456084

33111491.13

8

trans.

EL78 EL80 EL1037T EL1040T EL1055T

T-7 MICRO SEAL.38” W. x .38” H.

874000 $ 6.20 /ft.

.16” min.compressed height

$23.00 / cornersplice

T-7 STD SEAL.63” W. x .63” H.

875000 $ 7.40 /ft.



T-7 LARGE SEAL1.00” W. x 1.00” H.

876000 $ 9.20 /ft.



872100 1.00” x 1.00” $ 6.45 /ft.872075 .71” x .71” $ 4.70 /ft.872050 .50” x .50” $ 3.80 /ft.872038 .38” x .38” $ 3.10 /ft.

ROTARY VANE VACUUM PUMP• 29.91” Hg, oil-flooded• 1/2 hp, 120 VAC, 5 CFM, quietIncludes 10’ cord, on/off switch,exhaust filter/muffler, 3/8” and 1/4”female NPT connections.

Gauge optionshown

.030

.040

.063

.085

.125

$11.25

13.60

18.40

24.25

34.90

10.40

12.60

17.05

21.90

31.55

9.75

11.80

15.70

20.75

29.50

9.35

11.35

15.10

20.00

28.40

1-99 100-199 200-599 600+THICKNESS

QUANTITY

sq.ft

/sq.ft

PRICING - CURED

30-49 50-99 100-199 200-599 600+sq.ft


SQUARE PROFILES50 Duro (A) silicone(call for available rectangle profiles)

877038 .38” x .38” $ 2.95 /ft.877050 .50” x .50” $ 3.85 /ft.877075 .75” x .75” $ 6.40 /ft.877100 1.00” x 1.00” $ 9.10 /ft.

inches mm

.76

1.02

1.59

2.16

3.18

.030

.040

.063

.085

.125

$34.50

35.15

35.90

45.60

64.70

19.05

21.65

27.00

34.30

48.20

12.25

15.00

20.85

26.35

37.85

10.90

13.40

18.70

24.40

34.35

THICKNESSQUANTITY

/sq.ft

PRICING - UNCURED (minimum order 30 sq.ft.)

inches mm

.76

1.02

1.59

2.16

3.18

10.20

12.60

17.65

23.20

32.40

.125 $52.40 47.75 44.50 42.20

1-99 100-199 200-599 600+THICKNESSinches mm

QUANTITY (EL80 & EL78, 36”, 48”, & 54” WIDE)

sq.ft.

/sq.ft.3.18

P/N 807803807804807806807808

.600” (3 squares wide)

.800” (4 squares wide)1.200” (6 squares wide)1.600” (8 squares wide)

$ 3.80 / ft.4.90 / ft.7.10 / ft.9.20 / ft.

For use as a breather strip and to reducestress on diaphragm when using T-7 seal

INTERFLOW SHEET

INTERFLOW STRIP(807803 SHOWN)

502150 vacuum pump502F filter option502G gauge option502M manifold option18” hose & 4-port manifold

$ 515.00132.0052.0067.00

T-7 NANO SEAL.20” W. x .20” H.

873000 $ 4.10 /ft.



• To order, please specify compound, thickness, width, & length• Stock widths: 36” 48” 54” 72” (72” availability is limited)

• No minimum order for stock material• Special compounds (unique color, modulus, hardness, etc) available• Orders for non-stock thicknesses, widths, and compounds typically require a minimum order of 50 lin.ft.• Seamed blankets available in any width. Seam charges are: .063”, .085”, .125”: $27.00/ft. .030 & Interflow™: $30.00/ft.• Torr fabricates large molded sheets & custom contoured diaphragms

88501R

(800)845-4424(253)735-9115






VACUUM BAGGING TOOL COMPONENTS

Frame Mount Vacuum Port Assembly- Includes SS flex hose, VP36 probe, brassconnectors, bulkhead fitting, frame bracket, andfasteners. Does not include vacuum release valve.

$ 59.25884100

VACUUM PORT HARDWARE

Frame Mount Vacuum Port Assembly w/ Valve- Includes items above plus high-temp vacuumrelease valve.

68.70884200

884040

$ 13.95

Type J insert ass’y. Installs in diaphragm

Type K insert ass’y. Installs in diaphragm

Type J molded pass-thru

Type J insert with set screw one end

Thru-tool type J plug assembly

Panel-mount standard type J jack. Installs in.875 dia. hole.

Silicone-insulated type J tc wire, 24 gauge,vacuum-tight, .105” dia., bondable, price/ft.

$ 25.00

27.20

54.60

13.70

46.00

6.25

3.10

88053J

88053K

88058J

88070J

88080J

88083J

88180J

THERMOCOUPLE HARDWARE

88053J88053K 88070J 88080J

88180J

88083J

Gas-spring, 380°F, 11” compressed, 17”extended. Last 3 digits indicate force (pounds).

Gas-spring, 380°F, 17.8” compressed, 27.8”extended. Last 3 digits indicate force (pounds).

Gas-spring lock for AC86, 380°F rated

Ball stud for AC86, 5/16-18 thread

Ball stud for AC10, 5/16-18 thread

Retaining clip for AC86

Retaining clip for AC10

Weld-on ball stud doubler (call for size req’d)

Bolt-on ball stud plate

Base bracket, aluminum, 2” ball height

Base bracket, steel, 1.5” ball height

Base bracket, steel, .75” ball height

$ 26.30

39.10

87.00

2.30

2.50

.90

1.10

13.40

45.00

34.00

34.00

34.00

AC86xxx

AC10xxx

860086

AC98

AC301

AC99

AC302

885604

885605

885601

885602

885522

GAS SPRINGS, GAS-SPRING HARDWARE

AC99

AC86090(90 LB)

885605

885604 885601

885602

885522AC98

88710R $ 86.8088710L 86.80Frame detent assembly (right orleft). Includes bracket, pin, pulltag, frame-mount wedge, andfasteners.

88710R/L

PRSN-500

FRAME DETENTSFrame detents helpprevent accidentalclosure of tools. Theyare typically used withT-7 hinges alone, orwith gas-springcylinders as an addedsafety device. Pleasespecify right- or left-hand when ordering.

PRSN-500 44.75Replacement pin

885500

HANDLES, SWING CLAMPS

886200886203

886200

Handle, aluminum. Mounts with 1/4-20 skt hdscrews (included), 5.20” spacing.

Swing clamp, stainless steel. Clamps tounderside of plate, mold, tooling, or into slot inkeeper (see below). 10-32 screws included.Contact Torr to determine correct grip length.

Keeper, surface mount. 1/4-20 screws included.

$ 19.80

57.00

37.00

885500

886200

886203

4

HINGES

Standard, Right

Standard, Left

$ 54.20

54.20

88501R

88501L

For tools with odd-number of hinges, useone more right-hand hinge than left-hand

LEAK DETECTORS

884100 884200

Aluminum bracket and 1/4”npt brass bulk-head fitting

1/4” npt vacuum releaseball valve, rated to 380°F.

884106

$ 26.10

1/4” npt x 6” long stain-less steel jumper hose

$ 947.00890000

560.00892000High Freq. Generator Spark Tester Kit - includesspark tester, fan tip, and case

Replacement fan tip for 892000 892010 56.00

890000 892000

8” brass brush tip for 892000 892030 129.20

884060

$ 8.50

Ultrasonic Leak Detector Kit - includes detectorwith built-in speaker and meter, hand-held probe,headphones, concentrator, and case.

Fixed, Right

Fixed, Left

54.20

54.20

88503R

88503L

54.20

54.20

88502R

88502L

T-7 hinge, laser cut andformed for use with Torr’sT-7 standard seal(875000). Nickel-platedsteel. Includes weld-onaluminum spacer blockand mounting hardware.

Short, Right

Short, Left

Available in 3 versions: Standard, ShortTravel, or Fixed-Pivot.

Custom versions available.

88058J

860086


892000HDHeavy Duty High Freq. Generator Spark TesterKit - includes spark tester, fan tip, and case

625.00

RTV silicone adhesive,2.8 oz tube

RTV silicone adhesive,10.1 oz cartridge

1200 Primer, 1 oz *

$ 7.20

11.20

19.65

883203

883210

883501

ADHESIVE & PRIMER

*(no hazmat charges if shipped via UPS ground or air)

883203

883210 883501One ounce bottles of 1200 Primer are offered as aconvenience to our customers. Larger containersavailable through Dow Corning distributors.

acoples para vacio

Documents