1/3

How To Remove Cylinder Of Door Lock Without Keyizznews.com/how-to-remove-cylinder-of-door-lock-without-key

It’s possibly the most inconvenient thing that you cannot open the door with the keys

when you return home and are desperate for a nap. Suppose the key is not working, then

you should know how to remove the door lock cylinder without the key. We’ll go

through why keys get stuck in locks and how to get the door lock cylinder out of the lock

without a key and the trapped key out of the lock.

Tools You Need To Remove Door Lock Cylinder

Phillips head screwdriver to remove screws

Two Flathead screwdrivers

Sandpaper

Remove Door Handle Trim

Start by unscrewing the trim around the base of the door handle, and then you can

remove it. Get some help by taking the Lockout service in Forest Park. On the other hand,

if you’re working with a handle-and-lock combination that doesn’t remove but latches on,

then use a flathead screwdriver to remove the trim to access the screws keeping the door

handle in place. Remove the screws and the lever or handle.

Process of Removing Door Lock Cylinder

2/3

When you lose their keys, or the key no longer works on the door lock, you must remove

the old cylinder of the lock and replace it with a new one. Learn how you can remove a

door lock cylinder without any key. The steps are as follows.

1. Using a pin or a screwdriver and a pin to correctly locate the door lock position to

prepare for the following stages.

2. A metal shield will cover the entire lock body where you place the key. There are two

screws there on the bottom and the top. So, grab your screwdriver and effortlessly

unscrew both of them. Now, you can open the lock body.

3. You can find the other two screws where the lock links to the door frame hole. These

help to secure the lock in the proper place to be possible to remove by unscrewing

the front screw.

4. If the key is not working or you do not have any key, you’ll need to hold a slim or

small metal object, such as a hairpin. Just make sure you can shut the door at night.

As a result, you can effortlessly eject your entire body. You may have to continue

repeating this whole procedure several times before succeeding.

Remove the Spindle

Locate the spindle on the outside edge. To remove the spindle from the housing, you have

to gently press it down or pry it up with the screwdriver. Now, you can remove the spindle

easily.

Process of Removing a Stuck Key Out of Lock

Loose Cap

The first cause of a key trapped in your door lock is a loose lock cylinder cap. You can find

a key-in-knob cylinder on a variety of deadbolts and commercial knobs. Key Duplication

in Forest Park can also help in this situation. There is a small line between having it

function and not functioning, as a lock is constantly cautioned.

The screw cap on the back will move somewhat as a whole. When that happens, pulling

the key out will not work. Because the plug on the cylinder is pushing out a little bit,

preventing all of the bottom pins from coming up.

Fix The Cylinder Cap

Hold your fingers on the plug and pull the key out while pushing back on it to fix it. After

that, you can remove the cylinder by flipping it over. Moreover, all you have to do now is

put in a small detent and tighten the screw cap a little bit.

Out of Range MACS

When you’re working on a rekeying process, this is something that will happen. When a

key becomes stuck in the lock during a rekeying project, it’s most likely because your Max

Adjacent Cut Specification is out of factory specs.

3/3

However, it means the cuts between the spacing are too excessive, and the key isn’t left

with enough space to perform correctly. If you have a number one depth next to a number

nine depth, the distance between the two pins is too much; the key will not come out.

It can jam in the door lock as a result of this. The same thing can happen if those cuts are

made.

Method to Get Your Key in this Situation

You’ll either have to remove the cap or the top of the lock. After that, you’ll have to shim it

or do something to get that plug out to remedy the problem. Another benefit, or a bonus

reason in this area, is that you don’t check for top or master pins. If you have too many

top pins or master pins in there, it can cause complications and prevent the key from

coming out. To get those master pins out, make sure you’re using your master pinning

follower. If you’re still having trouble, verify the size of the top pin you’re using.