how to fix a dryer vent disconnected in the wall?

1/3

How to fix a Dryer Vent Disconnected in the Wall?sucomedicina.com/2021/09/10/how-to-fix-a-dryer-vent-disconnected-in-the-wall

Do you have a dryer at home? Definitely yes! It’s a must-have for every busy household.

While dryers need a lot of care, reconnecting an in-wall vent can be challenging if you

don’t have access to the interior space. So, a safe and consistent connection is required to

maintain dryer efficiency and diminish its fire hazard. Hence, this article will focus

on how to fix a dryer vent disconnected in wall.

How to Re-fit the Pipe?

There are three vent pipe categories that include inflexible aluminum, flex aluminum, and

vinyl tubing. While vinyl tubing is the most unsafe option as it can create a fire hazard. So,

when you route a vent via the wall, you may discover that it is much more convenient to

use flex aluminum pipes. So, if you have a dryer vent disconnected in the wall, you

should follow the steps below to reconnect the line safely.

Step 1 – Reroute the Vent Tube

If your vent pipeline is disconnected, it is the right time to consider rerouting it. You may

review the manufacturer’s disclaimers on the appliance to ensure the maximum distance

allowed for venting the dryer. You should assess other routing options as well to check

their feasibility.

Step 2 – Detach the Vent

If you have a detached dryer tube at any position within the wall cavity, it is always a good

idea to take off the vent cover on the home exterior to see if you can easily access it from

that end. However, if it is not visible to your eye, completely detach the pipe from the

central dryer and remove the line from the wall.

Step 3 – Insert a Line

Insert the wiring via the vent tube opening. Then, unfold the wiring from the reel and

gradually feed it via the wall. You may take help from another person outside of the home

to receive the wire. After they get hold of the wire end, you should stop inserting the wire

and cut it.

Step 4 – Feed the Tube Through

Connect the wiring to the vent tubing by pushing the wire via the aluminum side and

winding the end around the wire channel. Ensure that it is secure and does not come out

when you try to re-fiber the vent piping.

2/3

Next, take the help of another person. Make them stand on the outside of the home and

draw out the wire from the hole. The helper needs to perform this slowly and gently. And

if you are standing inside, you must hold on to the other pipe end to ensure that the side

remains put. However, if there are any hitches, jiggle the wire and move it back and forth

to remove the vent pipe. Then, continue pulling the wire unless the tube appears on the

external wall.

Step 5 – Reconnect the Vent Piping

You need to reconnect the vent tube to the dryer machine with the help of metal draw

bands or any similar fastener that grips it tightly. Next, lock the vent tubing to the

external wall and reconnect the outer vent cover.

How to Reconnect a Loose or Detached Vent Hosepipe?

Does your vent hose (on the backside of the dryer) falls-off frequently? You might be

wondering what to do. Hiring a Dryer Vent Cleaning in Canton, GA, can be

expensive. So what to do? You have to deal with all the scattered lint and the hot

surrounding. You know that your dryer hose is a flexible pipe that keeps detaching from

the wall cavity. So, you should know how to reconnect it. Here is how you can do it by

yourself:

What is the Purpose of the Hose?

The dryer hose helps move the warm, exhausted air from the appliance to the outside. So,

if any side of the vent detaches, the hot air will spread into the room, and lint may occupy

the floor. So, without a fixed hose, lint can accumulate in the dryer that may lead to

inefficient functioning and fire risks.

How to Fix?

If you follow these steps to fix a hose to the dryer, you might not need professional

assistance of Heating and Air Conditioning Service in Canton, GA.

Which Tools Are Needed?

Screw Driver

Nut Fixer

Adaptable Wrench

Flashlight

Which Parts to Reconnect?

New Vent Tubing or Hose

New Vent Locks

How to Reconnect?

3/3

1. Gradually move the dryer out from the wall to reach out the electrical cord or

bendable gas pipe.

2. Take off the electrical power from the source. So, if you have a gas-powered dryer,

you must be careful. You should turn off the gas supply through the valve and take

off the flexible gas pipe (if required).

3. You may use a flashlight when going behind the dryer to search which vent hose end

is disconnected.

4. The detached vent pipe must be visible, while the loose end may have the hose lock

still connected.

5. Examine the vent hose, locks, and pipes for any damage. However, if you find any

impairment, you must replace it before proceeding.

6. Slip the hose lock on the vent tube and reconnect it to the detached circular exhaust

piping.

7. Rightly position the hose fastener on the vent line that is typically 0.75 inches from

the open end.

8. After proper positioning of the hose and the lock, you should tightly fix them.

9. After connecting the hosepipe, slightly tweak the pipe to ensure it is properly fixed

and won’t slip out. However, if it moves from its position, you should retighten it.

10. After proper fixing of hosepipe, reconnect the electrical source. And if you are

working on a gas-powered dryer, work with caution.

11. Slowly drag the dryer back into its original position. Make sure that the hosepipe

does not compress or bend.

12. You may carry out a dryer test load to be sure that you have completed the task.

13. If you identify no issues, you are successful.

14. If there are any issues, you may call a professional for help.