RO-Emergency Boom dirancang dalam

berbagai ukuran, pendiployan yang cepat

dapat dari winder atau rak.

RO-Emergency Boom diproduksi dengan

menambahkan tali baja sebagai penahan

tegangan yang dikombinasikan dengan bagi-

an pleampung.

Dapat menahan smpah dan minyaki biasanya

penempatan pada pelabuhan.

Konstruksi penahan tegangangan pada bagi-

an atas boom menggunakan tali baja stainless

steill dan bagian bawah mrngunakan rantai

sebgai pemberat dan berfungsi sebagai

penahan tegangan.

Model RO-E-15 in RO-E - 25 in RO-E - 30 in RO-E - 36 in RO-E - 42 in RO-E - 44 in

Height 430 mm 635 mm 760 mm 910 mm 1,060 mm 1,100 mm

Freeboard 150 mm 200 mm 250 mm 280 mm 380 mm 400 mm

Draft 280 mm 430 mm 510 mm 635 mm 680 mm 27.5 in / 700

mm

Top Tension 5 mm Galv 6 mm sus 316 6 mm sus 316 6 mm sus 316 8 mm sus 316 8 mm sus 316

Bottom Tension 3/16 in / 5 mm

Galv. Chain

3/8 in / 10 mm

Galv. Chain

3/8 in / 10

mm Galv.

Chain

3/8 in / 10

mm Galv.

Chain

1/2 in / 12

mm Galv.

Chain

1/2 in / 12 mm

Galv. Chain

Weight 1.8 kg/m 3.3 kg/m 3.9 kg/m 4.2 kg/m 7.5 kg/m 7.5 kg/m

Breaking

Strength 2,909 kg 2,909 kg 2,909 kg 5,669 kg 7,500 kg 7,500 kg

RO Emergency Boom Specification

Pelampung bagian dalam menggunakan busa sel tertutup sehingga tidak memungkinkan

air masuk ke ruang pelampung. Pelapis bagian luar menggunakan bahan PVC dan di press

menggunakan mesin press high frekwensi, oil boom ini dilengkapi dengan pegangan dan

anchor points.

Oil Boom MaxiMax standar length 50 kaki / 15 m atau 100 kaki 30 m. MiniMax juga terse-

dia dalam bagian 25 kaki / 7.5 m. Ukuran khusus tersedia berdasarkan permintaan.

Accessories: Anchor Sets, Tidal Slides, Tow Bridle, Marker Lights, Boom Stand Off Units, Re-

pair Kit, Alternative Connectors, Rack, Magnetic Connector

RO-Emergency Boom

The RO Inflatable Boom is designed for harbour, bay, and any protected water locations.

Its operation is very practical and suitable for emergency and semi-permanent deploy-

ment either from storage area or from the RO Inflatable Boom Reel. Its draft and free-

board length will ensure that no oil passes through the Inflatable Boom. The OSPICO Inflat-

able Boom is classified into 5 types: Harbor, Nersshore, Offshore, Open Water and Deep

Model Harbor Nearshore Offshore Open Water Deep Sea

Connector Height 0.61 m 0.96 m 1.27 m 1.44 m 1.9 m

Operation Height 0.56 m 0.81 m 1.1 m 1.22 m 1.63 m

Freeboard 0.2 m 0.35 m 0.46 m 0.51 m 0.61 m

Draft 0.35 m 0.46 m 0.64 m 0.71 m 1.01 m

Section Length 30 m (other on

request) 30 m (other on

request) 30 m (other on

request) 30 m (other on

request) 30 m (other on

request)

Bottom Tensions 8 mm Galv.

Chain 9.5 mm Galv.

Chain 12.7 mm Galv.

Chain 12.7 mm Galv.

Chain 12.7 mm Galv.

Chain

Weight 2.75 kg/m 4.1 kg/m 4.1 kg/m 6.6 kg/m 7.3 kg/m

RO-Inflatable Boom Specification

RO-Inflatable Boom

RO Oil Inflatable Boom Reel is used for the storage and deployment of the RO Inflatable

Boom series. The reels are available in various sizes to accommodate the whole inflatable

boom series. Standard reels are hydraulic driven with forklift pockets and lifting eyes for

convenient positioning on docks, vessels, trailers, or at the spill site.

TECHNICAL DATA

Length ( cm ) 200 Hydraulic Motor High Torque, Low Speed

Width ( cm ) 270 Rational Speed Variable speed 0-20 rpm

Height ( cm ) 200 Max total flow hydraulic & Pressure 60 lpm Range Pressure 200 bar

Net Weight ( Kgs ) 1200 Hydraulic Motor speed 0-600 rpm 28 daNm

Hydraulic Supply

7 US gpm @ 2500 psi max Emergency Operation

A bypass valve in the hydraulic circuit allow reel to be rotated

without hydraulic power 26.5 l/min @ 17240 Kpa max

Frame 4 inch x 4 inch x t 0.25 inch wall carbon steel box section tube fully welded to A frame Lifting eye located at top Base frame

Finish Painting Shot blasted steel work 2 coats epoxy primer and 2 coats top coat orange

RO-Reel Boom