1/3
How to fix a Dryer Vent Disconnected in the Wall?sucomedicina.com/2021/09/10/how-to-fix-a-dryer-vent-disconnected-in-the-wall
Do you have a dryer at home? Definitely yes! It’s a must-have for every busy household.
While dryers need a lot of care, reconnecting an in-wall vent can be challenging if you
don’t have access to the interior space. So, a safe and consistent connection is required to
maintain dryer efficiency and diminish its fire hazard. Hence, this article will focus
on how to fix a dryer vent disconnected in wall.
How to Re-fit the Pipe?
There are three vent pipe categories that include inflexible aluminum, flex aluminum, and
vinyl tubing. While vinyl tubing is the most unsafe option as it can create a fire hazard. So,
when you route a vent via the wall, you may discover that it is much more convenient to
use flex aluminum pipes. So, if you have a dryer vent disconnected in the wall, you
should follow the steps below to reconnect the line safely.
Step 1 – Reroute the Vent Tube
If your vent pipeline is disconnected, it is the right time to consider rerouting it. You may
review the manufacturer’s disclaimers on the appliance to ensure the maximum distance
allowed for venting the dryer. You should assess other routing options as well to check
their feasibility.
Step 2 – Detach the Vent
If you have a detached dryer tube at any position within the wall cavity, it is always a good
idea to take off the vent cover on the home exterior to see if you can easily access it from
that end. However, if it is not visible to your eye, completely detach the pipe from the
central dryer and remove the line from the wall.
Step 3 – Insert a Line
Insert the wiring via the vent tube opening. Then, unfold the wiring from the reel and
gradually feed it via the wall. You may take help from another person outside of the home
to receive the wire. After they get hold of the wire end, you should stop inserting the wire
and cut it.
Step 4 – Feed the Tube Through
Connect the wiring to the vent tubing by pushing the wire via the aluminum side and
winding the end around the wire channel. Ensure that it is secure and does not come out
when you try to re-fiber the vent piping.
2/3
Next, take the help of another person. Make them stand on the outside of the home and
draw out the wire from the hole. The helper needs to perform this slowly and gently. And
if you are standing inside, you must hold on to the other pipe end to ensure that the side
remains put. However, if there are any hitches, jiggle the wire and move it back and forth
to remove the vent pipe. Then, continue pulling the wire unless the tube appears on the
external wall.
Step 5 – Reconnect the Vent Piping
You need to reconnect the vent tube to the dryer machine with the help of metal draw
bands or any similar fastener that grips it tightly. Next, lock the vent tubing to the
external wall and reconnect the outer vent cover.
How to Reconnect a Loose or Detached Vent Hosepipe?
Does your vent hose (on the backside of the dryer) falls-off frequently? You might be
wondering what to do. Hiring a Dryer Vent Cleaning in Canton, GA, can be
expensive. So what to do? You have to deal with all the scattered lint and the hot
surrounding. You know that your dryer hose is a flexible pipe that keeps detaching from
the wall cavity. So, you should know how to reconnect it. Here is how you can do it by
yourself:
What is the Purpose of the Hose?
The dryer hose helps move the warm, exhausted air from the appliance to the outside. So,
if any side of the vent detaches, the hot air will spread into the room, and lint may occupy
the floor. So, without a fixed hose, lint can accumulate in the dryer that may lead to
inefficient functioning and fire risks.
How to Fix?
If you follow these steps to fix a hose to the dryer, you might not need professional
assistance of Heating and Air Conditioning Service in Canton, GA.
Which Tools Are Needed?
Screw Driver
Nut Fixer
Adaptable Wrench
Flashlight
Which Parts to Reconnect?
New Vent Tubing or Hose
New Vent Locks
How to Reconnect?
3/3
1. Gradually move the dryer out from the wall to reach out the electrical cord or
bendable gas pipe.
2. Take off the electrical power from the source. So, if you have a gas-powered dryer,
you must be careful. You should turn off the gas supply through the valve and take
off the flexible gas pipe (if required).
3. You may use a flashlight when going behind the dryer to search which vent hose end
is disconnected.
4. The detached vent pipe must be visible, while the loose end may have the hose lock
still connected.
5. Examine the vent hose, locks, and pipes for any damage. However, if you find any
impairment, you must replace it before proceeding.
6. Slip the hose lock on the vent tube and reconnect it to the detached circular exhaust
piping.
7. Rightly position the hose fastener on the vent line that is typically 0.75 inches from
the open end.
8. After proper positioning of the hose and the lock, you should tightly fix them.
9. After connecting the hosepipe, slightly tweak the pipe to ensure it is properly fixed
and won’t slip out. However, if it moves from its position, you should retighten it.
10. After proper fixing of hosepipe, reconnect the electrical source. And if you are
working on a gas-powered dryer, work with caution.
11. Slowly drag the dryer back into its original position. Make sure that the hosepipe
does not compress or bend.
12. You may carry out a dryer test load to be sure that you have completed the task.
13. If you identify no issues, you are successful.
14. If there are any issues, you may call a professional for help.