1/3

TIPS FOR MOLD REMOVAL IN YOUR HOMEnewstechupdates.com/tips-for-mold-removal-in-your-home

Home Improvement

If you live in Georgia, USA you must have an HVAC system in your home for heating,

cooling, and ventilation. These systems feature complicated zones that perform different

functions. As these systems have ducts and provide a favorable temperature mold can

build colonies. Mold is very harmful to health and the issue can aggravate when the HVAC

system functions. For the safety of our family, we must learn useful tips for mold removal

in the home.

TIPS FOR MOLD REMOVAL IN HOME

Identify Plumbing Leakages

If mold development is detected near water pipes, sewage lines, or plumbing fittings,

there is a chance that mold is nourishing from a nearby leakage. You can allow the water

to run as it will help identify mold emerging from any leakages. You must know that water

can move in any direction when it tapers into any penetrable material. So, the actual

seepage might be some distance away from the mold spot. Once the leakage is detected,

you need to fix it. You must also check hidden areas such as cabinets and other difficult to

access areas.

Never Ignore Mold Development

2/3

Mold is a premature warning sign of humidity issue within walls or ceilings that would

cause wood to decay. Mold is difficult to remove, just wiping it off will not treat the

problem. You need to detect the water source and get it fixed.

Try to Detect External Leakages

If mold is developing on exterior wall spaces or ceilings, you need to locate the seepage

before treating the mold. A recommended way is to measure the area from the mold spot

to an opening (like door or window), then locate the leakage on the opposite side. You

must also carefully examine nearby exhausts, roof flashing, floors, window shafts, and

wooden structures. You must also look for ground slanted towards the house and

downspouts evacuating next to the wall. If the ground outside of your home is damp,

moisture will taper into the roots or hunk. This will give rise to permanent moisture

issues. So, you must ensure that flashing is properly installed.

Examine the Ducts for Mold Growth

If mold develops on the ceiling, beneath a duct or register but you cannot detect any roof

leakage. The reason might be poorly insulated ducts. Warm and humid air condenses to

transform into the water when cold air passes through the ducts. This shows that the duct

is not insulated or does not have a vapor blockade. Gradually, the water soaks the

insulation and drywall, allowing mold development.

And when it is winter season, moisture forms whenever the warm air gets in contact with

coldness. So, uncapped joints between duct units are a favorite place for mold

development. Hence, you must carefully examine these units. In severe cases, you may

consider calling a professional for Mold Air Duct Cleaning, Smyrna for the

treatment.

Differentiate Between Mold And Dirt

The majority of the mold is easily distinguishable, but a few times you may mistake it as

just dirt. In this case, you may perform a quick test to detect mold. You can try cleaning

the dirt spot with a cloth dipped in a diluted bleach solution. If the spot lightens

immediately or returns after cleaning, it shows it is mold. Apart from this, there are

professional mold kits also available in the market that can help detect mold and even

identify its type. These kits only help you identify but don’t help determine the cause of

growth. If you are unsure of what is infecting your ducts, you may call a professional for

Air Duct Cleaning in Smyrna.

Antimicrobial Treatment

After the moisture is dried, you can clean the area by using a certified antimicrobial spray

as it will help prevent mold regrowth. If you detect a rotten smell in the underground

room or other areas, it is recommended to fog the entire area.

Use Mold-Resistant Construction Materials

3/3

If you are constructing or re-constructing an area where you think moisture can be an

issue, you must use mold-resistant construction material. For walls, you can use pressure-

treated wood, firm insulation, and paperless wall covering that will not allow mold to

feed.

Use Surface Paint Featuring Mildewcide

In areas where mold is likely to grow such as underground walls, you may use an

antimicrobial treatment. While painting the walls, you may add a mildewcide primer to

your paint. If you can find a mildew-resistant paint variety, that would also be great.

Non-Insulation Supports Mold Growth

Warm air always finds an escape, and when it comes in contact with the cold surface it

condenses and becomes a source of moisture. This moisture may feed the mold.

Hence, you may detect mold spots on external walls, flooring, windows, corners, exhausts,

and lights. If the mold disappears after treatment when humidity levels are regulated by a

dehumidifier or vent fan, you just need to keep it under observation. If it regrows, call a

professional.

The Rigid Bathtub Mold

Your bathtub or shower-glass is always damp and susceptible to mold growth. For this,

you can use an antimicrobial spray and cover the plaster with two coats of sealants that

will prevent water penetration. If the mold growth is severe and tiles get off, you can

consider reconstructing the wall. This will help the mold removal in home.