product catalogue 2011-2012 - wellindo-kobe.com wim 2011.pdf · menyediakan arus pengelasan yang...

PRODUCT CATALOGUE2011-2012

Mesin-mesin las WIM telah di desain secara khusus untuk memenuhi semua kebutuhan

pengelasan terkini. Diciptakan untuk efisiensi dan multifungsi pada industri menengah sampai

penggunaan pada industri berat. Hanya dengan nilai investasi yang relatif kecil. Anda akan

mendapatkan yang terbaik untuk bermacam pekerjaan. Beralihlah ke WIM!

By Asia, In Asia, For Asia

KAMI MEMPERSEMBAHKANSOLUSI TOTAL SEMUA KEBUTUHAN PENGELASAN ANDA

daftar isi2011 - 2012

CHOOSE THE RIGHT MACHINE FOR THE RIGHT JOB

MMA (SMAW)● Proses Arc Welding yang paling populer.● Cocok untuk kondisi outdoor juga berangin.● Cukup baik untuk mengelas logam kotor atau berkarat.● Dapat diaplikasikan untuk berbagai posisi las. Dari mendekati minimum hingga ketebalan maksimum.

MULTI - PROCESS● Investasi yang menguntungkan, 1 mesin untuk 3 proses.● Mesin las multiproses dapat digunakan untuk pengelasan tipe SMAW, GMAW dan GTAW.● Sangat populer di kalangan pengguna mesin las, khususnya dalam bidang konstruksi berat dan pabrik berproduksi tinggi.

MIG WeldingMIG (GMAW)● Proses las yang paling mudah dipelajari.● Memungkinkan mengelas dengan kecepatan tinggi.● Memberikan kontrol yang lebih baik di logam tipis.● Menghasilkan asap dan uap yang lebih sedikit.● Mesin yang sama dapat digunakan untuk pengelasan flux cored.

TIG WeldingTIG (GTAW)● Memberikan hasil dengan kualitas terbaik, dan hasil las yang akurat.● Input panas dapat disesuaikan saat mengelas, dengan menggunakan remote control.PULSED TIG (GTAW-P)● Kontrol yang baik pada logam tipis.● Distorsi panas yang lebih sedikit pada logam tipis.

PLASMA (Cutting)● Dapat digunakan pada logam penghantar listrik manapun.● Zona yang terkena panas lebih kecil, membantu mencegah kerusakan cat atau timbulnya lengkungan.

MULTI - OPERATOR● Investasi yang lebih menguntungkan untuk mesin.● Dapat digunakan untuk lebih dari 12 operator las.● Dapat digunakan dalam berbagai posisi.● Proses aplikasi las yang lebih banyak hanya dengan 1 power source.

SPOT (Projection Welding)● Portable, mudah dioperasikan untuk industri ringan hingga berat.● Proses yang ekonomis.● Proses dengan durasi yang pendek. ● Toleransi tinggi terhadap berbagai variasi penggunaan.● Bermacam pengelasan dalam waktu yang bersamaan.

iWIM Catalogue ‘11

i

1

5

6

9

11

12

14

16

19

20

21

31

daftar isi

MMA Welding

Multi - Process

MIG Welding

TIG Welding

Plasma Cutting

Spot Welding

ROBOTIC Machine

Multi - Operator

Engine Drive Welding

Submerged Arc Welding

Accessories

Standard Equipment

ENGINE DRIVE WELDING● Cocok untuk pengerjaan di tempat yang tidak ada supply listrik.● Menyediakan arus pengelasan yang besar.● Dapat digunakan untuk pengelasan SMAW, GTAW, dan SMAW (dengan accessories voltage sensing wire feeder).● Dilengkapi output 220 V & 380 V.

SUBMERGED ARC WELDING● Tingkat deposisi sangat tinggi.● Kualitas las baik.● Cocok untuk pengelasan plat tebal.● Mudah pengoperasian.● Tidak memerlukan skill operator yang tinggi.

WIM Catalogue ‘11 WIM Catalogue ‘11

1 2

OCM 160, OCM 250OCM 160, OCM 250 OIL-COOLED

MOSFET INVERTER

AC 300AP/N : 3 300 180 922

AC 200AP/N : 3 200 180 922

A

KVA

A

VAc

%

Kg

mm

mm

Input Voltage

Input Current

Input Power

Welding Current Range

Open Circuit Voltage

Duty Cycle

Weight

Dimension (LxWxH)

Weldable electrode

AC 300A

60

24

55 ~ 300

76

40

95

540 x 425 x 660

2.6 to 6

AC 200A

30

16.3

55~200

64

40

73

680 x 490 x 300

2.6 to 4

WELDS :● Steel● Stainless Steel● Cast Iron

TYPICAL USAGE :● Tool / die repair● Maintenance● Fabrication● Shipbuilding & Repair● Farm and Ranch● Hobbyist

Heavy Industrial AC 500AP/N : 3 500 180 922

AC 400AP/N : 3 400 180 922

A

V

A

V

%

kVA

W

%

kg

mm

mm

Input Voltage

Input Current

Idle Voltage

Output Current

Rated Output Voltage

Rated Duty Cycle

Power Capacity

Idle Loss

Power Factor

Efficiency

Weight

Dimension

Enclosure Protection Degree

Weldable Electrode

Information

IE 121

18

64

20 ~ 120

24.8

30

3.96

30

0.93

85

3.8

300 x 140 x 190

IP21S

1.6 to 3.2

nonstop 10 pcs electrode 3.2

Single phase 220-240 v

AC 400A

76

32

80 - 400

76

40

140

580 x 430 x 700

2.6 to 6

IE 161

30

60

20 ~ 160

26.4

60

6.6

30

0.93

85

6.8

350 x 160 x 300

IP21S

1.6 to 3.2

nonstop 60 pcs electrode 3.2

AC 500A

100

42,5

85 ~ 500

79.4

60

185

627 x 451 x 892

2.6 to 8





Medium IndustrialFor the demanding professional

Fully featured inverter for better welds, better protection and longer hours

For the occasional weld

AC ARC WELDER / SMAW DC ARC WELDER MOSFET INVERTER

ES 1200 P/N : 3 120 108 110

ES 1200 MP/N : 3 120 108 111

ES 1200**) / ES 1200M*) ES 1600**) / ES 1600M*) ES 2000*)

ES 2000MP/N : 3 200 108 111


TYPICAL USAGE :● Repair● Maintenance● Fabrication● Automotive● Home and Farm use● Vocational

Light Industrial

Light Industrial

A

KVA

A

VDc

%

Kg

mm

Input Voltage

Input Current

Input Power



Duty Cycle

Weight

Dimension (LxWxH)

Weldable Electrode

Suitable For

220V (1-Phase) 50/60 Hz

25

5.5

35 ~ 120

65

60

6,8

292 x 154 x 292

1.6 to 3.2

220V (1-Phase) 50/60 Hz

30

6.6

20 ~ 160

65

60

8

393 x 154 x 292

1.6 to 3.2

MMA & TIG

220V (1-Phase) 50/60 Hz

37

8.1

20 ~ 200

65

60

8.3

390 x 153 x 298

1.6 to 4.0

ES 1600 P/N : 3 160 108 110ES 1600 M P/N : 3 160 108 111

OPTIONAL ACCESSORIES


SCRATCH TIG SETP/N : 3 012 603 900For ES 1200MP/N : 3 016 603 900For ES 1600M / ES 2000M

SCRATCH TIG SETP/N : 3 016 603 900For ES 2500M / ES 2000M

TRANSFORMER MOVING CORE TYPE

DC ARC WELDER / SMAW

ES 2500 ES 4200

A

KVA

A

VDc

%

Kg

mm

mm

ES 2500MP/N : 3 250 108 111

ES 4200MP/N : 3 420 108 111

380V (3-Phase) 50/60 Hz

21

8.7

20 ~ 250

70

60

17

530 x 215 x 380

1.6 to 4

MMA & TIG

380V (3-Phase) 50/60 Hz

27.4

11.7

40 ~ 420

75

60

37

630 x 420 x 540

1.6 to 5

Input Voltage

Input Current

Input Power



Duty Cycle

Weight

Dimension (LxWxH)

Weldable Electrode

Suitable For

DC ARC WELDER

*) Complete with electrode holder, earth clamp set**) Complete with electrode holder, earth clamp set, TIG torch set, argon regulator

380V (2-Phase) 50 Hz

IE 161P/N : 3 161 118 111

IE 121P/N : 3 121 118 111

MOSFET INVERTER

WIM Catalogue ‘11 WIM Catalogue ‘113 4*) Complete with electrode holder, earth clamp set *) Complete with electrode holder, earth clamp set

MOSFET INVERTER

IGBT INVERTER

DC ARC WELDER / SMAW AC/DC ARC WELDER / SMAW


TYPICAL USAGE :● Fabric plate work● Metal tank● Farms● Construction● Metalworks● Steel building erection

WIMARC 250 AC/DCP/N : 3 250 188 320

Medium Industrial

RS 500P/N : 3 500 108 330

Heavy Industrial

WIMARC 250 AC/DC RS 500*)

A

KVA

A

A

VDc

VAc

%

Kg

mm

mm

Input Voltage

Input Current

Input Power



Duty Cycle

Weight

Dimension (LxWxH)

Weldable electrode

Suitable for

380V (2-Phase) 50/60 Hz

41

15.6

DC : L 25 ~ 140 ; H 70 ~ 250

AC : L 20 ~ 155 ; H 105 ~ 275

70

71

30

180

710 x 449 x 550

2 to 5

MMA AC / MMA DC / TIG DC

380V (3-Phase) 50/60 Hz

49

32

L 60 ~ 220 ; H 70 ~ 470

-

75

-

60

350

864 x 584 x 584

2 to 8

MMA & TIG

TRANSFORMER RHEOSTAT CONTROL

IT 1600MP/N : 3 160 168 111

IT 2000 MP/N : 3 200 168 111


TYPICAL USAGE :● Tool / die repair● Maintenance● Plant Fabrication● Vessel/tank/boiler fabrication● Automative● Home and farm use● Vocational

Light Industrial



SCRATCH TIG SETP/N : 3 016 603 900For IT 168 / IT 1600M

SCRATCH TIG SETP/N : 3 016 603 900For IT 168 / IT 1600M

WELDS:● Steel● Stainless Steel● Cast Iron● Gouging (TS 600)

TYPICAL USAGE:● Fabric platework● Metal tank● Farms● Construction● Metalworks● Steel building erection● Pipewelding● Maintenance● Shipbuilding● Foundries

Heavy Industrial

IA 500XP/N : 3 500 168 112

IA 400XP/N : 3 400 168 112

TRANSFORMER THYRISTOR TYPE

380V (3-Phase) 50/60 Hz

45

32

40 ~ 400

75

60

157

715 x 485 x 665

2 to 6

380V (3-Phase) 50/60 Hz

65

47

50 ~ 600

75

60

216

870 x 580 x 700

2 to 8

Input Voltage

Input Current

Input Power



Duty Cycle

Weight

Dimension (LxWxH)

Weldable Electrode

Suitable For

TS 300P/N : 3 300 108 230 TS 400

P/N : 3 400 108 230 TS 600P/N : 3 600 108 230

WELDS:● Steel● Stainless Steel● Cast Iron● Gouging (TS 600)

TYPICAL USAGE:● Fabric platework● Metal tank● Farms● Construction● Metalworks● Steel building erection● Pipewelding● Maintenance● Shipbuilding● Foundries

Heavy Industrial

TS 400*) TS 600*)

A

KVA

A

VDc

%

Kg

mm

mm

380V (3-Phase) 50/60 Hz

32

23

30 ~ 300

75

60

147

715 x 485 x 665

2 to 5

TS 300*)


SCRATCH TIGACCESSORIES

GMAW / FCAWACCESSORIES

A

KVA

A

VDc

%

Kg

mm

mm

Input Voltage

Input Current

Input Power



Duty Cycle

Weight

Dimension (LxWxH)

Weldable Electrode

Suitable For

IT 1600M*) IT 2000 M220V (1-Phase) 50/60 Hz

30

6.2

20 ~ 160

75

100

7

440 x 180 x 355

1.6 to 4

MMA & TIG

MMA & TIG MMA, TIG & Gouging

220V (1-Phase) 50/60 Hz

37

8.4

40 ~ 200

60

60

8

375 x 175 x 330

1.6 to 4

DC ARC WELDER / SMAW DC ARC WELDER / SMAW

Input Voltage

Input Current

Input Power



Duty Cycle

Weight

Dimension (LxWxH)

Weldable Electrode

Suitable For

IA 500 X

A

KVA

A

VDc

%

Kg

mm

mm

380V (3-Phase) 50/60 Hz

28

13.3

35 ~ 400

74

60

38

720 x 420 x 760

1.6 to 5

380V (3-Phase) 50/60 Hz

33

15.7

45 ~ 500

74

60

40

720 x 420 x 760

1.6 to 6

IA 400 X

Fully featured inverter for the specialist who demands the best

The true industrial solution


MULTI - PROCESS WELDING MACHINE

GGG

Heavy Industrial

WELDS:● Steel● Stainless Steel● Aluminium● Copper● Brass● Titanium● Casting

TYPICAL USAGE:● Automotive● Metalworks● Fabrication● Manufacturing● Construction● Ship Building

Input Voltage

Frequency

Rated Input

Power Factor

Idling Input Current

Max OCV (CC)

Current Range (CC)

OCV Range (MIG) CV

Rated Duty Cycle 70%


Weight

Dimension (WxLxH)

Hz

KVA

A

VDC

A

V

Kg

mm

AC 380 / 415 V ± 10%, 3 Phase

50 / 60

24.5

0.96

0.25

75

5 - 500

15 - 48

500 A / 40V

400 A / 36V

70

385 x 630 x 545

● The CC / CV selector switch provide a multi function welding process : MMA (CC), TIG (CC), MIG (CV), Sensing Feeder (CV).

● A built in three phase over and under voltage protection enable the machine to protect itself from human error.

● Produces stable arc and low input current draw.

● Digital Amps display meter for easy setting and more precise control. (Only for DC process).

● Auto Hold function available on wire feeder. (optional).

● Input Voltage Compensation keeps the welding parameters constant even when the input voltage change + 10%.

● Thermal Overload Protection allows internal components to be protected from damages. This will allow the machine to shut down automatically is the duty cycle isexceededorairflowandcoolingare restricted.

EVO 500 *)

*) Complete with electrode holder & earth clamp set

P/N : 3 500 123 930

OPTIONAL ACCESORIES

MIG Torch CO2 Gas Regulator Wire Feeder

TIG Torch Argon Regulator DC 500 HF


MMA WELDING MIG WELDING TIG WELDING

IGBT INVERTER TAPPING SWITCH

MIGWELD 188*)

MIG-MAG ES 273-1*)

MIGWELD 210S*)

TAPPING SWITCH

A

KVA

A

Vdc

%

step

mm

m/min

Kg

mm

Input Voltage

Input Current

Input Power



Duty Cycle

Voltage Adjustment

Filler Wire Dimensions

Wire Feeding Speed

Weight

Dimension (LxWxH)

A

KVA

A

Vdc

%

step

mm

m/min

Kg

mm

Input Voltage

Input Current

Input Power



Duty Cycle

Voltage Adjustment


Wire Feeding Speed

Weight

Dimension (LxWxH)

6

Light Industrial

WELDS :● Steel● Stainless Steel● Aluminium● Copper● Brass

TYPICAL USAGE :● Automative● Maintenance● Fabrication● Manufacturing● Auto Body

Medium Industrial



220V (1-Phase) 50/60 Hz

30

6.6

40 ~ 210

18.4 ~ 32.5

30 % at 155A

6

0.6 ~ 1.0

1 ~ 20

58

860 x 500 x 515

380V (3-Phase) 50/60 Hz

14.1

9.2

30 ~ 240

16.5 ~ 36

30

10

0.8 ~ 1.2

1 ~ 20

80

780 x 312 x 645

220V (1-Phase) 50/60 Hz

33

7.2

30 ~ 210

18 ~ 45

30

10

0.6 ~ 1.0

1 ~ 20

72

850 x 450 x 720

*) Complete with 3m MIG Torch, CO2 regulator, earth clamp set

MIG-MAG ES 273-1P/N : 3 273 201 930

MIGWELD 188P/N : 3 188 201 910

MIGWELD 210SP/N : 3 210 200 910

MIG-MAG Welder / GMAW



MIGWELD 280SEF**)MIGWELD 280S*)

MIGWELD 500SEF***)MIGWELD 350SEF***)

*) Complete with 3m MIG torch, CO2 regulator, earth clamp set**) Complete with 3m wire feeder, 3m MIG torch, CO2 regulator, earth clamp set***) Complete with 3m wire feeder, 3m MIG torch, CO2 regulator heater, earth clamp set

MIGWELD 350SEFP/N : 3 350 261 930

Medium Industrial

MIGWELD 500SEFP/N : 3 500 261 930

Heavy Industrial

MIGWELD 280SEFP/N : 3 280 261 930

MIGWELD 280SP/N : 3 280 201 930

Medium Industrial



A

KVA

A

Vdc

step

mm

m/min

Kg

mm

Input Voltage

Input Current

Input Power



Duty Cycle

Voltage Adjustment


Wire Feeding Speed

Weight

Dimension (LxWxH)

A

KVA

A

Vdc

step

mm

Kg

mm

Input Voltage

Input Current

Input Power



Duty Cycle

Voltage Adjustment


Weight

Dimension (LxWxH)

380V (3-Phase) 50/60 Hz

26

17

40 ~ 350

18 ~ 44

60% at 350A ; 100% at 270A

2 x 12

0.8 ~ 1.6

157

940 x 515 x 820

380V (3-Phase) 50/60 Hz

38

24.9

45 ~ 500

18 ~ 54

60% at 430A ; 100% at 330A

2 x 12

0.8 ~ 1.6

170

940 x 515 x 820

380V (3-Phase) 50/60 Hz

24

15.7

40 ~ 280

19 ~ 39

40% at 280A ; 60% at 250A

4 x 8

0.6 ~ 1.2

1 ~ 20

125

950 x 515 x 820

MIG-MAG Welder / GMAW TAPPING SWITCH

380V (3-Phase) 50/60 Hz

24

15.7

40 ~ 280

19 ~ 39

40% at 280A ; 60% at 250A

4 x 8

0.6 ~ 1.2

1 ~ 20

125

950 x 510 x 838



8*) Complete with 3m MIG torch, CO2 regulator, earth clamp set**) Complete with 3m wire feeder, 3m MIG torch, CO2 regulator, earth clamp set***) Complete with 3m wire feeder, 3m MIG torch, CO2 regulator heater, earth clamp set

TA 350i***) TA 500i***)Input Voltage

Input Current

Input Power

Welding & Crater Current Range

Welding & Crater Voltage Range

Max. Open Circuit Voltage

Duty Cycle


Weight

Dimension (LxWxH)

380V (3-Phase) 50/60 Hz

27.5

18.1

75 ~ 350

17.8 ~ 31.5

53

60

0.8 ~ 1.2

139

1005 x 540 x 890

380V (3-Phase) 50/60 Hz

42

31.9

80 ~ 500

18 ~ 39

64

60

1.2 ~ 1.6

178

1005 x 540 x 890

TA 500iP/N : 3 500 261 230

TA 350iP/N : 3 350 261 230

IMG 350P/N : 3 350 266 130

Wire Feeder

IMG 500P/N : 3 500 266 130

A

KVA

A

Vdc

Vdc

%

mm

Kg

mm

Heavy Industrial

WELDS :● Steel● Stainless Steel● Aluminium● Titanium● Brass

TYPICAL USAGE :● Automative● Maintenance● Fabrication● Manufacturing

Heavy Industrial

WELDS :● Cast Iron● Steel● Stainless Steel● Aluminium● Copper● Brass

TYPICAL USAGE :● Automative● Manufacturing● Fabric Platework● Construction● Metalworks● Ship Building

IGBT INVERTER

IMG 350***) IMG 500***)380V (3-Phase) 50/60 Hz

25

17.3

50 ~ 350

15 ~ 31.5

68

60

0.8 ~ 1.2

67.2

840 x 350 x 605

380V (3-Phase) 50/60 Hz

40

30.9

50 ~ 500

15 ~ 39

72

60

1.2 ~ 1.6

74.8

840 x 350 x 605

Input Voltage

Input Current

Input Power

Welding & Crater Current Range

Welding & Crater Voltage Range

Max. Open Circuit Voltage

Duty Cycle


Weight

Dimension (LxWxH)

A

KVA

A

Vdc

Vdc

%

mm

Kg

mm



THYRISTOR AUTO

MIG-MAG Welder / GMAW TAPPING SWITCH

WIM Catalogue ‘11 WIM Catalogue ‘11*) Complete with TIG torch set, gas hose set, argon regulator, earth clamp set, plus kit set**) Complete with TIG torch set, gas hose set, argon regulator, earth clamp set, hose (toyoron set), remote control set, plus kit set9

TIG WELDER / GTAW TIG WELDER / GTAW

TIG WELDER / GTAW

DC INVERTER PULSE

*) Complete with TIG torch set, gas hose set, argon regulator, earth clamp set, plus kit set**) Complete with TIG torch set, gas hose set, argon regulator, earth clamp set, hose (toyoron set), remote control set, plus kit set

ITG 180 AP/N : 3 180 308 110

ITG 180 A*)

WELDS :● Steel● Stainless Steel● Copper● Brass

TYPICAL USAGE :● Home & Kitchen● Industrial● Fabrication● Medical● Office Equipment● Tools and Janitorial

Medium Industrial

Input Voltage

Input Current

Input Power


Start & Crater Current Range

Gas Post Flow Time


Pulse Frequency

Duty Cycle

Weight

Dimension (LxWxH)

A

KVA

A

A

Sec

Vdc

Hz

%

Kg

mm

220V (1-Phase) 50/60 Hz

23

5.1

10 ~ 180

-

3 or 8

55

-

60

8

371 x 155 x 295

ITG 500 P AC/DCP/N : 3 500 388 130

ITG 300P AC/DCP/N : 3 300 388 130

Medium Industrial Heavy Industrial

Input Voltage

Input Power


Initial/Crater/Pulse Current Range

Up Slope / Down Slope Time

Gas Post Flow Time

Open Circuit Voltage (AC/DC)

Pulse Frequency

Duty Cycle

Weight

Dimension (LxWxH)

ITG 300 P**) ITG 500 P**)

KVA

A

A

Sec

Sec

V

Hz

%

Kg

mm

380V (3-Phase) 50/60 Hz

DC : 11 ; AC : 12

AC : 10 ~ 300 ; DC : 4 ~ 300

AC : 10 ~ 300; DC : 4 ~ 300

0.1 ~ 5

0.1 ~ 25

67

Low : 0.5 ~ 15; Middle : 15 ~ 500

50

54

770 x 350 x 604

380V (3-Phase) 50/60 Hz

DC : 17.5 ; AC : 19.3

AC : 10 ~ 300 ; DC : 4 ~ 500

AC : 10 ~ 300; DC : 4 ~ 500

0.1 ~ 5

0.1 ~ 25

67

Low : 0.5 ~ 15; Middle : 15 ~ 500

40

62

770 x 350 x 604

DC INVERTER PULSE

ITG 222PP/N : 3 222 308 110

ITG 222P*)

WELDS :● Steel● Stainless Steel● Titanium● Brass

TYPICAL USAGE :● Tool / Die repair● Vessel / Tank fabrication● Pressure valve or regulator● Train● Automative● Airplane / Aerospace

Medium Industrial

220V (1-Phase) 50/60 Hz

32

7

5 ~ 200

5 ~ 200

2 ~ 10

100

Low: 10 ~ 40 ; High : 125 ~ 500

40

15.3

408 x 225 x 321

FOOT SWITCHP/N : 001 603 900

WCS 33 Water CoolerP/N : 3 033 603 910


10

TG 301P (AC/DC)P/N : 3 301 388 220

AC/DC THRYSTOR PULSE

FOOT SWITCHP/N : 001 603 900

WCS 33 Water CoolerP/N : 3 033 603 910

OPTIONAL ACCESSORIESMedium Industrial


TYPICAL USAGE :● Tool / Die repair● Vessel / Tank Fabrication● Pressure valve or regulator● Train● Automative● Airplane / Aerospace● Ship Building


TYPICAL USAGE :● Tool / Die repair● Vessel / Tank fabrication● Pressure valve or regulator● Train● Automative● Airplane / Aerospace● Ship Building

AC/DC INVERTER PULSE

TG 301P (AC/DC)**)380V (2-Phase) 50/60 Hz

68

26

AC: 20 ~ 300 ; DC : 8 ~ 300

20 ~ 300

0.1 ~ 6 0.2 ~ 10

0.3 5 ~ 25

80

0.5 ~ 10

50

175

700 x 440 x 810

A

KVA

A

A

Sec

Sec

V

Hz

%

Kg

mm

Input Voltage

Input Current

Input Power


Initial & Crater Current Range (AC/DC)

Up Slope Time Down Slope Time

Gas Pre Flow Time Gas Post Flow Time

Open Circuit Voltage (AC/DC)

Pulse Frequency

Duty Cycle

Weight

Dimension (LxWxH)

TIG WELDER / GTAW

Input Voltage

Input Current

Input Power


Start & Crater Current Range

Gas Post Flow Time


Pulse Frequency

Duty Cycle

Weight

Dimension (LxWxH)

A

KVA

A

A

Sec

Vdc

Hz

%

Kg

mm


PLASMA CUTTING / PAC INVERTER

IPS 56P/N : 3 056 500 130

IPS 56

CUTS :● Mid Steel● Zinc Coated Steel● Stainless Steel● Copper● Aluminium● Brass

TYPICAL USAGE :● Tool / Die Repair● Vessel / Tank● Boiler Fabrication● Maintenance● Automantive● Fabrication

ACCESSORIES :● Plasma Torch Set● Earth Clamp● Air Regulator Filter Set

CUTS :● Mild Steel● Stainless Steel● Zinc coated steel● Aluminium● Brass● Copper

TYPICAL USAGE :● Tool / Die repair● Vessel / Tank boiler fabrication● Automative● Maintenance● Fabrication

PS 60 PS 100

All the equipments above are completed with 6m Plasma torch set, earth clamp set, regulator set, plus kit set

GOLDCUT PS 60P/N : 3 060 500 930

Medium Industrial

GOLDCUT PS 100P/N : 3 100 500 930

Heavy Industrial

Primary Supply

Rated Input

Rated Duty Cycle (10mins)

Rated Output Current

No Load O.C.V.

Weight

Dimension (L x W x H)

Input Voltage

Input Current

Input Power

Output Current

Output Voltage

Duty Cycle

Recommended Air Pressure

Air Flow

Max. Cut

Good Cut

Weight


50/60 Hz

(1ph V)

%

A

VDC

kg

mm

A

KVA

A

Vdc

%

bar / PSI

Scfh

mm

mm

Kg

mm

AC230V, +15%-20%

12

50

10 - 55

260

14.2

225 x 430 x 300

380V (3-Phase) 50/60 Hz

23.5

15.5

25, 40, 60 (3 steps)

140

60

5.0 ~ 5.5 (bar) / 72 ~ 80 (PSI)

240

Steel: 25, SS: 18, All: 18

Steel: 18, SS: 8, All:8

98.5

720 x 470 x 890

380V (3-Phase) 50/60 Hz

39.5

26

40, 65, 100 (3 step)

145

60

5.0 ~ 5.5 (bar) / 72 ~ 80 (PSI)

240

Steel: 40, SS: 35, All: 35

Steel: 35, SS: 30, All:30

162.8

600 x 407 x 943

Light Industrial

THRYSTOR

11 12

PORTABLE SPOT WELDING TRANSFORMER

MINISPOT MC 8

WELDS :● Proses Welding● Resistance Spot Welding

ADVANTAGES OF WIM :● Good working performance through thyristor controlled

circuit eliminating contractors. Long serviceable life.● Power saving though usage of high quality conductive material and superior secondary circuit.● Efficient after cooling circuit.● Lower exhaust noise through unique construction.● Safe usage through high insulation techniques.● 2 years limited warranty


ADVANTAGES OF WIM :● Easy to use control with function selection electronic timer. ● New front cable & panel fixed force air cooled cables for increased cable life.● Single sided spot welding.● 2 years limited warranty.

Light Industrial

Input Voltage

Rated Capacity

Duty Cycle

Tong Length

Matrial Thickness

Weight

Dimension (LxWxH)

220V (10Phase) 50/60 Hz

2.5

50

152.4

0.5 + 0.5

11.5

330.2 x 152.4 x 114.3

220V (10Phase) 50/60 Hz

8

50

1.0 + 1.0

36.5

380 x 273 x 373

KVA

%

mm

mm

Kg

mm

Input Voltage

Rated Capacity

Output Current (Max)

No Load Voltage

Duty Cycle

Dimension of Troath

Tip Holder

Tip

Maximum Electrode Force

Quantity of Cooling Water

Max. Matrial Thickness

Weight

Dimension (LxWxH)

220V/380V (1or2-Phase) 50/60 Hz

15

7500

2.7

50

Depth: 300 ; Opening: 150

Diameter: 22 ; Length: 153

Diameter: 16 ; Taper: 1/5

180

6

1.5 + 1.5

118

750 x 335 x 1190

Mechanical Control

220V/380V (1or2-Phase) 50/60 Hz

25

12000

3

50

Depth: 330 ; Length: 150



320

6

2.5 + 2.5

158

830 x 375 x 1190

Mechanical Control

220V/380V (1or2-Phase) 50/60 Hz

25

12000

3

50

Depth: 330 ; Length: 150



420

6

2.5 + 2.5

166

830 x 375 x 1190

Pneumatic Control

KVA

A

Vac

%

mm

mm

mm

Kg

L/min

mm

Kg

mm

MC 15 MC 25 PMC 25

MC 25P/N : 3 025 400 920

PMC 25P/N : 3 025 470 920

MC 15P/N : 3 015 400 920

Medium Industrial

Medium Industrial

Heavy Industrial

Heavy Industrial

MINI SPOT 2.5P/N : 3 002 400 910

MC 8P/N : 3 008 400 910

MC 8 Accessories :

TRANSFORMERPLASMA CUTTING / PAC SPOT WELDER


SPOT & PROJECTION WELDER THRYSTOR

JPC 35 P/N : 3 035 477 920

JPC 50 P/N : 3 050 477 920

JPC 75 P/N : 3 075 477 920

JPC 100 P/N : 3 100 477 920

Medium IndustrialHeavy Industrial


ADVANTAGES OF WIM :● Good working performance through thyristor controlled circuit eliminating contractors. Long serviceable life.● Power saving though usage of high quality conductive material and superior secondary circuit.● Efficient after cooling circuit.● Lower exhaust noise through unique construction.● Safe usage through high insulation techniques.● 2 years limited warranty

JPC 35 JPC 50 JPC 75 JPC 100380V (2-Phase) 50/60Hz

100

30000

12

Depth: 600 ; Opening : 200





1000

12.7

10 + 10

400

1390 x 820 x 1980

380V (2-Phase) 50/60Hz

75

25000

8.5





27000

6.0


1000

12.7

7.5 + 7.5

380

1390 x 820 x 1980

380V (2-Phase) 50/60Hz

50

16000

8.5





19000

6.0


500

8

5.0 + 5.0

330

1170 x 690 x 1910

380V (2-Phase) 50/60Hz

35

14000

8.5





16000

7.5


500

6

3.5 + 3.5

310

1170 x 690 x 1910

KVA

A

%

mm

mm

mm

mm

A

%

mm

Kg

L/min

mm

Kg

mm

Input Voltage

Rated Capacity

SPOT :


Duty Cycle

Dimensions of Troath

Upper Tip Holder

Lower Tip Holder

Tip


Duty Cycle

Dimensions of Troath

Max. Electrode Force

Cooling Water

Max. Matrial Thickness

Weight


PROJECTION :

ROBOT AUTOMATION (WASP)

14


ROBOT AUTOMATION (WASP)

SOLUSI UNTUK KEBUTUHAN ANDA

ADVANTAGES OF WIM

4 Cylinders Auto Multi Spot System 10 Cylinders Auto Multi Spot Welder 12 Cylinders Spot System

Wire Mesh Spot System with Servomotor Positioning

12 Cylinders Auto Multi Spot Welder Pressure Tank Auto MIG Welding

12 Gun Multi Spot10 Cylinders Auto Multi Spot WelderAbsorber Bracket Spot

Car Sead Multi Spot 10 Cylinders Auto Multi Spot Welder

Servo Positioning Wire Mesh Multi Spot System

10 Cylinders Auto Multi Spot Welder Auto Turn Table with Clamping Jig for Plasma TIG Welding System

All WIM Automation Machine can be design specially to solve any welding problem that can’t be done by standard welding machine. WIM help you to increase your productivity.

The new KUKA KR 5 arc rounds off the range of KUKA robots at the lower end. Its payload of 5 kg makes it out-standingly well-suited to stan-dard arc welding tasks. With its attractive price and com-pact dimensions, it is the ideal choice for your application too. Whethermountedontheflooror inverted overhead, the KR 5 arc always performs its tasks reliably.

MULTI-OPERATOR

Multi Operator welding is a process that allows several welders to work at different site at the same time. The concept is to provide a single stationary welding power source that is able to provide up to 12 welding opera-tors. This power source is very often being used at different environments such as construction site; in/out door fabrication; pipe line construction; and ship building.

The investment for this welding process per welder is relatively low and the main power source is limited to justonearea.Withonestationarypowersourcethecostofmaintenancewillbedefinitelylowerthen12powersource. The amperage regulators that attach to the power source is relatively easy to use and maintain. The WIM Weldmaster 2000 will come with 6 regulators and Weldmaster 3000 will come with 12 regulators respec-tively.

MU

LTI-

OP

ER

AT

OR

15 16


MULTI-OPERATOR

WELDMASTER 1250 / 2500

WELDS :● Steel● Stainless Steel● Aluminium● Copper● Brass● Titanium● Casting

TYPICAL USAGE :● Fabrication● Construction● Ship Building● Pipe

Heavy Industrial

Optional Welding Accessories :

PWF500 External for MIGWire Feeder (CC / CV)P/N : 3 500 602 920

DC500HF High for TIG Frequency Module (CC)

17 18

TECHNICAL CHARACTERISTICS

Rated Input Voltage

Rated Frequency

No. of Phase

Rated Input Power

Rated Input Current



No Load Voltage

No Load Power

Current Setting

Power Factor

Maximum Efficiency

External Dimension (WxLxH)

Weight

Width

Length

Height

WELD MASTER 1250

380/415

50/60

Three Phase

80

105

1600

1250

55 VDC

570

20-500A

0.92

93

1000 x 3050 x 2175

940

864

3050

1900

WELD MASTER 2500

380/415

50/60

Three Phase

160

210

3200

2500

55 VDC

1140

20-500A

0.92

93

1585 x 3050 x 2175

1850

1760

3050

1900

V

Hz

KVA

A

A

A

W

A

%

MM

kg

mm

mm

mm

MMA WELDING MIG WELDING TIG WELDING

DIESEL ENGINE DRIVE ALPHAWELD 500D

WELDS :● Steel● Stainless Steel● Alumunium● Cooper● Brass● Titanium● Casting

TYPICAL USAGE :● Fabrication● Constraction● Ship Building● Pipe

Optional Accessories :

● SMAW- Earth Clamp Set- Electrode Holder Set

● GMAW- MIG Feeder- PWF External Wire Feeder

● GTAW- Scratch Art Set- High Frequency Module- Water Cooling System

ALPHAWELD 500D

* Please note that the specification may vary within each country. Specification are subjected to change without notice.

TECHNICAL SPECIFICATIONProduct

Name

ALPHAWELD500D

Output Range

5-500A CC15-48V CV

Type of Engine

DeutzF3L-912Diesel

Generator output KVA

30 KVA

Dimension H x W x D

(mm)

1380 x860 x1710

Net Weight (kg)

910

HP & Speed (rpm)

44@1500

No. of Cyl

3

Rated Outpiut Current/Voltage/Duty Cycle

400A/36V/100%500A/40V/50%

This is the most rugged and reliable welding machine that we had ever build for heavy industrial use. Every component in this machine is engineered and built to ensure ultimate reliability in the most punishing condition. Engine drive is considered the best heavy duty machine all round and its generator fuel consumption is lower compare to other conventional source.

ALPHAWELD 500DP/N : 3 500 100 001


SUBMERGED ARC WELDINGSAW POWER 1250DC

WELDS :● Steel● Stainless Steel

TYPICAL USAGE :● Oil & Gas Industry● Pipe Welding● Ship Building● Heavy Fabrication● Rail Road● Pressure Vessel Fabrication

Standard Accessories :

● Wire Feed Roller 3 - 4mm● Wire Feed Roller 4.2 - 5mm● Contact Tip 3.2 mm● Contact Tip 4.0 mm● 95mm2 Welding Cable● 3V Laser LED● Welding Tractor Track

TECHNICAL SPECIFICATIONDC Series Thyristor Total Digital Automatic Submerged Arc Welding Item/model

Rated input voltage (V)

Frequency (Hz)

Rated input capacity (KVA)

No-load voltage (V)

Adjustable range of current (A)

Rated duty cycle (%)

Diameter of applicable welding wire (mm)

Insulation level

Outline dimension of power unit (mm)

Weight of power unit (kg)

Weight of welding tractor (kg)

DC-1250

3 380/415

50

93

72

200-1250

60%

Ø2-Ø6

H

1000 x 610 x 880

420

40

* Please note that the specification may vary within each country. Specification are subjected to change without notice.

SUBMERGED ARCSAW Power 1250DC

2019

SAW 1250 DCP/N : 3 125 125 000

GENUINE WIM ACCESSORIES

For AC/DC Arc Welder / SMAW

TYPE DESCRIPTION

ACCS ESIT1600/2000-A(for ES 1600/ES 2000)(for IT 1600/ES 2000)

3 016 601 900

ACCS-ES1200-A(for ES1200)

3 012 601 900

Arc Accesories for ES 1600 & IT 1600, ES 20001 x 2.5m welding cable & electrode holder1 x 2.5m welding cable with earth clamp

Arc Accesories for ES 12001 x 2.5m welding cable & electrode holder1 x 2.5m welding cable with earth clamp

ACCS ESIT1600/2000-T(for ES 1600/ES 2000)(for IT 1600/ES 2000)

3 016 603 900

ACCS-ES1200-T(for ES 1200)3 012 603 900

TIG Accessories for Inverter ES 1200, ES 1600 & IT 1600

1 x 4m TIG torch set (WP-17V)

1 x 2.5m welding cable with earth clamp

1 x argon regulator


GENUINE WIM ACCESSORIESGENUINE WIM ACCESSORIES

2221

MIG Welder / GMAW

POS

2

6

5

7

1

3

4

4

4

8

8

8

BUILD GROUP

MIG gun

Torch

Wear Parts

DESCRIPTION

MB 15 AK, 3 meter long, 50 degree bent



Swan neck MB 15AK

Nozzle Spring

Gas Nozzle Holder

Central Plug KZ-2

Handle (L)

Trigger Switch, short

Gas Nozzle Conical

Contact tip M6 E-Cu; Ø0.6


Contact tip M6 E-Cu; Ø1.01 0RPM-TC103.160

Steel liner Insulated 1.5/4.5, WireØ0.6-0.8mm , 3 m



UNIT

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

PART NUMBER

3 199 153 502

3 199 154 502

3 199 155 502

3 100 155 002

3 100 058 002

3 130 012 152

3 100 501 002

3 100 180 002

3 100 100 242

3 130 001 152

3 160 060 062

3 160 080 062

3 160 100 062

3 124 153 153

3 124 153 154

3 124 153 155

BINZEL PART NO.

002 D504

002 D505

002 D506

002 0009

002 0058

002 0078

501.0003

180 D054

185 D074

145.0107

140.0008

140.0059

140.0253

124.0011

124.0012

124.0015

• Optimum torch cooling - high endurance

• Ergonomically designed handle system - optimum handling in every position

• Light and highly flexible cable assembly, makes low-fatigue possible

• Robust construction for durability and extended torch life

Cooling : Air Cooled

Rating : 180A CO2

150 A Mixed gases M 21 according to DIN EN 439

60% Duty cycle

Wire Ø : 0.6 - 1.0 mm

MB 15 AK

WIM machine compatibility:

• MIGWELD 188, MIG 210S

MIG Welder / GMAW

MB 24 KD


• MIGWELD 280S, 280SEF, 273-1


Rating : 250 A CO2

220 A Mixed gases M 21 according to DIN EN 439

35% Duty cycle

Wire Ø : 0.8 - 1.2 mm

• Optimum torch cooling - high endurance

• Ergonomically designed handle system - optimum handling in every position

• Light and highly flexible cable assembly, makes low-fatigue possible

• Robust construction for durability and extended torch life

POS

2

7

1

6

4

5

5

5

3

9

9

9

8

8

8

8

DESCRIPTION

MB 24 KD, 3 meter long, 50 degree bent



Swan neck MB 24 KD

Central Plug KZ2

Handle (L)

Trigger switch, short

Gas diffuser (white)

Tip Holder M6; 26.0mm




Gas nozzle, conical NW Ø 12.5

Steel liner insulated 2.0/4.5, WireØ1.0-1.2mm , 3 m



Teflon Core Liner 1.5/4.0, WireØ0.8-1.0mm , 3 m




UNIT

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

PART NUMBER

3 199 243 502

3 199 244 502

3 199 245 502

3 100 245 002

3 100 501 002

3 100 180 002

3 100 100 242

3 100 600 102

3 160 124 262

3 240 080 062

3 240 100 062

3 240 120 062

3 124 001 162

3 124 153 243

3 124 153 244

3 124 153 245

3 121 028 003

3 121 028 005

3 122 028 003

3 122 028 005

BINZEL PART NO.

012.D092

012.D093

012.D094

012.0001

501.0003

180.D054

185.D074

012.0183

142.0003

140.0051

140.0242

140.0379

145.0080

124.D026

124.D031

124.D035

126.0005

126.0011

126.0021

126.0028

BUILD GROUP

MIG gun

Torch

Wear Parts


GENUINE WIM ACCESSORIES GENUINE WIM ACCESSORIES

MIG Welder / GMAW

ABIMIG GRIP 305 LWAIR COOLER

POS

5

1

6

7

10

10

10

2

3

3

3

3

3

3

3

3

4

9

10

10

BUILD GROUP

ABIMIG GRIP

Swan Neck

Handle GRIP

Cable assembly

Wear parts

DESCRIPTION

A305 LW, Central Adaptor KZ:3m



Swan neck ABIMIG GRIP A 305 45* bent

Spacer

Handle GRIP with trigger cpl.

Trigger 2-pole GRIP

PTFE core liner 1.5/4.0; blue; wire electrode Ø 0.8 - 1.0; for 3.00 m

PTFE carbon core liner 1.5/4.0; wire electrode Ø 0.8 - 1.0; for 3.00 m


Contact tip holder M16/M8/52 US

Contact tip M8 E-Cu; Ø 1.0 (10x30)


Contact tip M8 CuCrZr; Ø 1.0 (10x30)

Contact tip M8 CuCrZr; Ø 1.2 (10x30)

Contact tip M8 E-Cu; Ø 1.0 for alu wire (10x30)


Contact tip M8 CuCrZr silver-plated ; Ø 1.0 (10x30)


Gas nozzle M16; ND 16 golvanized; short

Steel Liner Insulated 2.0/4.5, Wire Ø1.0-1.2 , 3m

Teflon Core Liner 2.0/4.0, Wire Ø1.0-1.2mm, 3m

Teflon Core Liner 2.7/4.7, Wire Ø 1.6mm , 3 m

UNIT

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

PART NUMBER

3 199 305 LW3

3.199 305 LW4

3.199 305 LW5

3 100 305 0LW

3 101 000 0LW

3 100 305 0LW

3 101 010 0LW

3 121 028 003

3 124 015 400

3 124 020 400

3 150 016 008

3 160 010 082

3 160 120 082

3 160 010 092

3 160 120 092

3 160 010 072

3 160 120 072

3 160 010 062

3 160 120 062

3 130 016 009

3 124 153 243

3 122 028 003

3 122 027 003

BINZEL PART NO.

767.D660.1

767.D661.1

767.D662.1

767.D663.1

767.D668.5

180.0127

185.0101

126.0005

127.0002

127.0005

014.D745.5

140.0313

140.0442

140.0316

140.0445

141.0008

141.0015

147.0316

147.0445

145.D022

124.0026

126.0021

126.0039

• Low Weight Bikox® - up to 50% weight saving

• Ergonomic short handle with ''GRIP'' soft components on the handle, thumb

rest and ball joint - guarantees optimal handling in all positions

• Screw-on gas nozzle with thermoprotective insulation - extending torch life

• Function integrated tip holder (gas diffusor, gas nozzle holder and contact

tip holder in one piece ) - reduces stock requirements

• Laminar gas feed - excellent gas coverage for best welding results

• Changeable gas nozzle seat - ''extends'' operating cycle of the torch neck

and reduces maintenance costs

• Electrically insulated liner and connection nut (on the central adaptor) - enables

exact setting of the arc parameters and therefore repeatability of welding results


Rating : 315 A / 270 A CO2

300 A / 240 A Mixed Gases

Duty cycle : 35% / 60%

Wire size : 0.8 - 1.2 mm

2423

Technical Data :


• MIG 350SEF, TA350i, IMG 350

MIG Welder / GMAW

• Low Weight Bikox® - up to 50% weight saving

• Ergonomic handle with ball joint - guarantees optimal handling in all positions

• Function integrated tip holder - reduces stock requirements

• Reduces maintenance costs


• MIG500SEF, TA500i, IMG 500

POS

5

1

6

7

9

9

9

10

10

10

2

3

3

3

3

3

3

3

3

3

3

4

9

9

9

10

10

10

BUILD GROUP

ABIMIG GRIP

Swan Neck

Handle GRIP

Cable assembly

Wear parts

DESCRIPTION




Swan neck ABIMIG GRIP A 355 45* bent

Spacer

Handle GRIP with trigger cpl.

Trigger 2-pole GRIP

Guide spiral liner insulated; 2.0/4.5; red; for wire Ø 1.0 - 1.2; for 4.00 m

Guide spiral liner insulated; 2.5/4.5; yellow; for wire Ø 1.4 - 1.6; for 3.00 m

Guide spiral liner insulated; 2.5/4.5; yellow; for wire Ø 1.4 - 1.6; for 4.00 m



PTFE carbon core liner 2.7/4.7; wire electrode Ø 1.6; for 3.00 m

Contact tip holder M16/M8/52 US









Guide spiral liner insulated; 1.5/4.5; blue; for wire Ø 0.6 - 0.8; for 3.00 m

Guide spiral liner insulated; 1.5/4.5; blue; for wire Ø 0.6 - 0.8; for 4.00 m

Gas nozzle M16; ND 16 golvanized; short




Teflon Core Liner 2.0/4.0, Wire Ø1.0-1.2mm, 3m



UNIT

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

PART NUMBER

3 199 355 LW3

3 199 355 LW4

3 199 355 LW5

3 100 355 0LW

3 101 000 0LW

3 100 305 0LW

3 101 010 0LW

3 124 153 244

3 103 124 452

3 104 124 452

3 124 015 400

3 124 020 400

3 124 027 470

3 150 016 008

3 160 080 082

3 160 100 082

3 160 120 082

3 160 160 002

3 160 120 072

3 160 160 072

3 160 120 062

3 160 160 062

3 124 153 153

3 124 153 154

3 130 016 009

3 124 153 243

3 124 153 244

3 124 153 245

3 122 028 003

3 122 027 003

3 122 027 005

BINZEL PART NO.

767.D690.1

767.D691.1

767.D692.1

767.D693.1

767.D668.5

180.0127

185.0101

124.0031

124.0041

124.0042

127.0002

127.0005

127.0010

014.D745.5

140.0114

140.0313

140.0442

140.0587

141.0015

141.0022

147.0445

147.0590

124.0011

124.0012

145.D022

124.0026

124.D031

124.D035

126.0021

126.0039

126.0045

ABIMIG GRIP 355 LWAIR COOLER


Rating : 350 A / 300 A CO2

320A / 270 A Mixed Gases

Duty cycle : 35% / 60%

Wire size : 1.0 - 1.6 mm

Technical Data :



MIG Welder / GMAW

PUSH-PULL TORCHAIR COOLER

MIG WIRE FEED ROLER

3 199 223 592 PULL - PUSH TORCH (Air Cooled)Other Acessories Same With MB 24 KD

MIG WIRE FEED ROLER3 180 810 32V

3 180 812 32U

3 181 012 32U

3 181 012 32V

3 180 810 42U

3 180 810 42V

3 180 812 42V

3 181 012 42U

3 181 012 42V

3 180 810 52V

3 181 012 52U

3 181 012 52V

3 181 016 52U

3 181 216 52V

3 181 216 42X

Feed Roller 0.8/1.0 mm “V” for Migweld 210

Feed Roller 0.8/1.2 mm “U” for Migweld 210

Feed Roller 1.0/1.2 m “U” for Migweld 210

Feed Roller 1.0/1.2 mm “V” for Migweld 210

Feed Roller 0.8/1.0 mm “U” for Migweld 280 ~ 420

Feed Roller 0.8/1.0 mm “V” for Migweld 280 ~ 420


Feed Roller 1.0/1.2 mm “U” for Migweld 280 ~ 420


Feed Roller 0.8/1.0 mm “V” for TA 350A/TA 500 / migweld S series

Feed Roller 1.0/1.2 mm “U” for TA 350A/TA 500 / migweld S series


Feed Roller 1.0/1.6 mm “U” for TA 350A/TA 500 / migweld S series


Feed Roller 1.2/1.6 mm Fluxcore for TA 350A/TA 500/migweld series

2625

POS

1

1

1

1

2

2

2

2

3

3

3

3

3

4

5

PART NUMBER

3 199 172 523

3 199 160 302

3 199 300 303

3.180.603.900

3.222.603.900

3 199 300 303

3 120 010 03C

3 120 016 03C

3 120 024 03C

3 120 032 03C

3 120 010 03B

3 120 016 03B

3 120 024 03B

3 120 032 03B

3 130 150 063

3 130 150 083

3 130 148 093

3 130 147 103

3 130 146 123

3 100 050 743

3 100 025 743

DESCRIPTION

Tig Torch WP 17

Tig Torch WP 26

Tig Torch WP 18

Tig Torch Set for ITG 180A

Tig Torch Set for ITG 222P

Tig Torch Set for TG 301P/ ITG 300P/ 500P AC.DC

Collet Ø 1 mm (10N22)

Collet Ø 1.6 mm (10N23)



Collet body Ø 1.0 mm (10N30)




Ceramic Nozzle no 4 (10N50)





Long Back Cap

Short Back Cap

TIG Welder

TIG TORCH

TUNGSTEN ELECTRODE

3 110 150 016

4 110 150 024

5 110 150 032

Tunsten Electrode Ø 1.6 mm



3 150 000 116

3 150 000 124

3 150 000 132

Gold Plus Tungsten Electrode Ø 1.6 mm



Gold Plus for AC/ DC Welding

WT 20, 2% Thoria



ABIPLAS 70 AIR COOLED

Plasma Cutting

POS

8

9

10

4

5A

5B

2

2

2

2

3

1

1

7

6

BUILD GROUP

Torch

Wear Parts

DESCRIPTION

Abiplas Cut 70, 6m

Torch body

Handle, complete

Trigger switch

O ring

Insulator

Shield cap (old version)

Shield cap (new)

Plasma Nozzle, ø0.9mm 30A (Short)

Plasma Nozzle, ø1.1mm 30 to 50A (Short)

Plasma Nozzle Cross Groove, ø1.1mm 50A (Short)

Plasma Nozzle, ø1.1mm 30 to 50A (Long)

Swirl ring

Electrode Long

Electrode Short

Distance Spring

Spatter Guard

UNIT

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

PART NUMBER

3 199 706 004

3 170 777 004

3 177 110 004

3 117 111 004

3 070 000 880

3 170 170 041

3 188 070 004

3 188 070 078

3 170 170 094

3 170 170 114

3 170 170 066

3 170 170 144

3 170 170 4SR

3 170 170 04A

3 170 170 04E

3 100 100 004

3 188 070742

Binzel Part No.

742.D040

742.D022

745.D046

185.D039

165.D014

742.D012

742.D023

742.D078

742.D008

742.D018

742.D028

742.D038

742.D073

742.D057

742.D056

742.D010

742.D113

• Robust design and optimum cooling guarantee long life of torch and consumables

• Handle with extended trigger for increased distance between plasma jet and hand,

thus safer and fatigue-free working

• Quickly exchangeable consumables (including insulator)

• Large range of consumables, equipment and accessories

Technical Data :


Rating : 70A at 60% Duty Cycle

Gas Supply : Compressed air

Air Pressure : 4.8 – 7.0 bar

Working Pressure : 5.5 bar

Air Volume : 155 L/Min at 5.5 bar


• IPS 56, PS61

2827

ABIPLAS 110 AIR COOLED

Plasma Cutting

POS

2

1

9

6

7A

7B

5

5

5

5

5

3

4

4

8

10

11

BUILD GROUP

Torch

Wear Parts

DESCRIPTION

Abiplas Cut 110 6m

Torch body

Handle, complete

Trigger switch

O ring

Insulator

Shield cap

Shield cap (new)

Plasma Nozzle, ø1.0mm 30 to 50A



Plasma Nozzle Long, ø1.2mm/50A

Plasma Nozzle Cross Groove, Long , ø1.2mm/50A

Swirl ring

Electrode Short

Electrode Long

Distance spring

Bevel Cutting Nozzle

Spatter Guard 110 / 150

UNIT

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

PART NUMBER

3 199 110 004

3 100 777 004

3 777 110 004

3 117 111 004

3 000 000 080

3 110 110 041

3 188 110 004

3 188 110 204

3 110 110 104

3 110 110 124

3 110 110 144

3 110 110 066

3 110 110 068

3 110 110 4SR

3 110 110 04E

3 110 110 04A

3 110 000 004

3 110 757 040

3 118 110 742

PRODUCT CODE

745.D061

745.D025

745.D046

185.D039

165.D013

745.D020

745.D026

745.D018

745.D010

745.D017

745.D066

745.D068

745.D113

745.D008

745.D016

745.D012

757.D014

757.D092

• Robust design and optimum cooling guarantee long life of torch and consumables

• Handle with extended trigger for increased distance between plasma jet and hand,

thus safer and fatigue-free working

• Quickly exchangeable consumables (including insulator)

• Large range of consumables, equipment and accessories

Technical Data :


Rating : 110A at 60% Duty Cycle

Gas Supply : Compressed air

Air Pressure : 4.8 – 7.0 bar

Working Pressure : 5.5 bar

Air Volume : 180 L/Min at 5.5 bar


• PS 101


GENUINE WIM ACCESSORIES

29 30

Other Accessories

P/N : P 233 535 000

Solar HelmetAdjuster Share 9-13 DIN

P/N : 3 002 000 001

Samurai Solar HelmetAdjuster Share 9 -13 DIN

Foot Switch TFS 302For JPC series

P/N : 3 130 302 205

Foot Switch VP-SF3 335For PMC & T60

P/N : 3 133 503 355

P/N : 001 603 900

Foot Switch Control Set

For TG 301P AC/DC, ITG 300P AC/DC &

ITG 500P AC/DC

Argon Gas Regulator

CO2 Gas Regulator

CO2 Gas Regulator Heater

3 122 002 242

3 122 002 312

3 122 002 220

3 388 091 003

GAS REGULATORCO2 Gas Regulator

CO2 Gas Regulator 110 V Heater

Gas Regulator 220 V Heater

Argon Gas Regulator

Water Cooling System for TIG Torch

220 / 50 Hz, 1.1 A

Max. 10 L/min, Tank Capacity 8L

T 60P/N : 3 060 600 910

PWF 500 Input Power

Rated Duty Cycle

Electrode Wire

Wire Speed

Max. Spool Size

Capacity

Dimension (WxDxH)

18 to 90 VDC, 400A (max)

60%

0.6-3.2 mm

10-220 RPM

15.0 kg (33lb)

304 mm (12in)

(250 x 720 x 550) mm

PWF 500P/N : 3 060 600 910

WCS 33P/N : 3 033 603 910

DC 500 HF

T 60 (Turn Table)

Primary Supply

Weight

Dimension (LxWxH)

Max. Load 60 kgs, Disc plate speed 0,5 ~ 7 rpm

220 V / 50 Hz, 1 Phase

29 kg

650 x 330 x 380 mm

DC500HF High Frequency Module (CC)

STANDARD EQUIPMENT

.

.

3 120 108 111

3 120 108 110

3 160 108 110

3 160 108 111 (M)

3 160 168 111

3 200 108 111

3 121 118 111

3 161 118 111

3 250 108 111

3 420 108 111

3 400 168 112

3 500 168 112

3,200,180,922

3 300 180 922

3,400,180,922

3 500 180 922

3 500 123 930

ES 1200 M

ES 1200

ES 1600 M

ES 1600

IT 1600M

ES 2000 M

IE 121

IE 161

ES 2500 M

ES 4200 M

IA 400X

IA 500X

AC 200 A

AC 300 A

AC 400 A

AC 500 A

EVO 500

Elektrode Holder Set

Earth Clamp Set


Earth Clamp Set

Tig Torch Set WP 17-V

Argon Regulator


Earth Clamp Set


Earth Clamp Set

Tig Torch Set WP 17-V

Argon Regulator


Earth Clamp Set


Earth Clamp Set


Earth Clamp Set


Earth Clamp Set

-

-

-

-

-

-

-

-


Earth Clamp Set

3 188 201 910

3 210 201 910

3 273 201 930

3 280 201 930

3 280 260 930

Migweld 188

Migweld 210S

Migweld 273-1

Migweld 280S

Migweld 280SEF

Mig Torch Binzel

MB 15 AK, 3 m

CO2 Regulator

Earth Clamp Set

Mig Torch Binzel

MB 15 AK, 3 m

CO2 Regulator

Earth Clamp Set

Mig Torch Binzel

MB 24 KD, 3 m

CO2 Regulator

Earth Clamp Set

Mig Torch Binzel

MB 24 KD, 3 m

CO2 Regulator

Earth Clamp Set

Mig Torch Binzel

MB 24 KD, 3 m

CO2 Regulator

Earth Clamp Set

.

MACHINE TYPESTANDARD

ACCESSORIESPART NUMBER

.

MIG WELDER / GMAW

TIG WELDING / GTAW

Migweld 350SEF

Migweld 500SEF

TA 350i

TA 500i

IMG 350

IMG 500

Mig Torch Binzel

Abimig Grip 305 LW, 3 m

CO2 Heater Regulator

Earth Clamp Set

Mig Torch Binzel

Abimig 355LW, 3 m


Earth Clamp Set

Mig Torch Binzel



Earth Clamp Set

Mig Torch Binzel

Abimig 355LW, 3 m


Earth Clamp Set

Mig Torch Binzel



Earth Clamp Set

Mig Torch Binzel

Abimig 355LW, 3 m


Earth Clamp Set

Tig Torch WP 17

Argon Regulator

Gas Hose

Earth Clamp Set

Kit Set

Tig Torch WP 18-25

Argon Regulator

Gas Hose

Earth Clamp Set

Kit Set

Hose (Toyoron Set)

Remote Control Set

Tig Torch WP 26, 4 m

Argon Regulator

Gas Hose

Earth Clamp Set

Tig Torch WP 26, 4 m

Argon Regulator

Gas Hose

Earth Clamp Set

Kit Set

Tig Torch WP 18-25

Argon Regulator

Gas Hose

Earth Clamp Set

Kit Set

TG 160

TG 301P

ITG 180 A

ITG 222P

ITG 300P AC / DC

3 160 308 210

3 301 388 220

3 180 308 110

3 222 308 130

3 300 388 130

3 350 261 930

3 500 261 930

3 350 261 230

3 500 260 230

3 350 266 130

3 500 266 130

MIG WELDING / GMAW

MMA/ SMAW




STANDARD EQUIPMENT NOTES

.



.

TIG WELDING / GTAW

PLASMA CUTTING

SPOT WELDING

ENGINE DRIVE WELDING

SUBMERGED ARC WELDER

Tig Torch WP 18-25

Argon Regulator

Gas Hose

Earth Clamp Set

Kit Set

Hose (Toyoron Set)

ITG 500P AC / DC3 500 388 130

Plasma Torch ABP 70

Air Regulator

Earth Clamp Set

Kit Set

Plasma Torch ABP 70

Air Regulator

Earth Clamp Set

Kit Set

Plasma Torch ABP 110

Air Regulator

Earth Clamp Set

Kit Set

IPS 56

GOLDCUT PS 60

GOLDCUT PS 100

3 055 500 130

3 060 500 930

3 100 500 930

3 022 400 910

3 008 400 910

3 015 400 920

3 025 400 920

3 025 470 920

3 035 477 920

3 050 477 920

3 075 477 920

3 100 477 920

Mini Spot 2.5

MC 8

MC 15

MC 25

PMC 25

JPC 35

JPC 50

JPC 75

JPC 100

Spot Torch

ALPHAWELD 500D3 500 100 001

Welding Tractor

3V Laser LED

95mm2 Welding Cable

Contact Tip dia 3.2mm

Contact Tip dia 4.0mm

Wire Feed Roller 3.0 - 4.0 mm

Wire Feed Roller 4.2 - 5.0 mm

SAW POWER 1250 DC3 125 125 000



OPTIONAL EQUIPMEENT-

Kit Set

Kit Set

DC 500 HF

Tig Torch WP 18

Argon Regulator

Tungsten 3.2

2Xwelding cable 50 mm2, 3m

Wire Feeder

Mig Torch RM 50


Wire Feeder

T 60

PWF 33

WCS 33

AS 500 HF

EVO Mig Set

3 060 600 910

3 033 602 900

3 033 603 910

3 500 603 900

3 500 602 900

3231 WIM Catalogue ‘11WIM Catalogue ‘11

SERVICE CENTRES : JAKARTA1. Kawasan Industri PulogadungJl. Rawa Gelam III No. 2, Jakarta 13930Tel. (021) 4683 2522Fax. (021) 4682 6823 (021) 4682 8645

2. Jl. Fatmawati No. 14 A-BCilandak Barat - CilandakJakarta SelatanTel. (021) 7590 8858, 7590 8861Fax. (021) 7590 8941

3. Mega Glodok Kemayoran,Blok B No. 26, Kemayoran,Jakarta Pusat 10610Tel. (021) 2664 7190Fax. (021) 2664 7191

BANDUNGJl. Taman Citarum No.1, Bandung 40115Tel. (022) 426 7788, 426 7799Fax. (022) 423 0474

CIREBONJl. Pemuda No. 11 Cirebon 45132Tel. (0231) 205 519, 201 909Fax. (0231) 204 580

SEMARANGJl. Mentri Supeno No. 31 ASemarang 50243Tel. (024) 841 8620, 841 8621Fax. (024) 8314982

SURABAYAJl. Pahlawan No. 28, Surabaya 60174Tel. (031) 534 9414 (hunting)Fax. (031) 534 9413

DENPASARJl. Cargo Permai No. 2DBanjar Tengah - Ubung, Denpasar 80116Tel. (0361) 417 079, 417 077Fax. (0361) 417 098, 417 078

MEDAN Kawasan Industri Medan II,Jl. Pulau Menjangan 1 Blok A-5, Medan 20371Tel. (061) 687 1619 (hunting)Fax. (061) 4521660

MAKASSARKompleks Pergudangan dan Industri Parangloe Indah Blok C2 -30Jl. Prof. Dr. Ir. Sutami No. 38, Makassar 90244Tel. (0411) 4720 259Fax. (0411) 449104

BALIKPAPANJl. Marsma Iswahyudi No.45Blok A3, Sepinggan,Balikpapan Selatan 76115Tel. (0542) 720 9575, 7209573Fax. (0542) 726 1276

PONTIANAKKomp. Pontianak Mal - Blok A No. 5-6Jl. Gusti Sulung Lelanang, Pontianak 78117Tel. (0561) 742 699, 742 128Fax. (0561) 742 737

BANJARMASINJl. Mayjen sutoyo S No. 297Telaga Biru - Teluk DalamBanjarmasinTel. (0511) 441 2271 Fax. (0511) 336 2947

SAMARINDAKomplek Pergudangan Tahap IIJl. Teuku Umar Blok P No. 7Samarinda - Kalimantan TimurTel. (0541) 270 175Fax. (0541) 271 464

PALEMBANGJl. Perintis Kemerdekaan Ruko Blok DNo.1-2, RT 021/06 Kelurahan Kuto BaruKecamatan Ilir TimurTel. (0711) 717 148Fax. (0711) 715 592

AUTHORIZED SERVICE DEALERS :

BATAM Komplek Tanah Mas Blok F No.1 - 2Sei Panas, Batam - 29421Tel. (0778) 472 318, 472 319Fax. (0778) 464 335

PURWOKERTO Jl. Gerilya No. 560, Purwokerto 53142 Tel. (0281) 640 667 Fax. (0281) 632 829

PEKANBARU Jl. Riau No. 188 C, Pekanbaru 28292 Tel. (0761) 848 496, 46 454, 46 455 Fax. (0761) 848 496

multimayaka

MM

CD

/CT/

WIM

/I/IX

/201

1

product catalogue 2011-2012 - wellindo-kobe.com wim 2011.pdf · menyediakan arus pengelasan yang...

Documents