Download - (Xii Xiii)ABSTRAK
-
xii
INTISARI
Perkembangan industri sebagai bagian dari usaha ekonomi jangka panjang
diarahkan untuk menciptakan struktur ekonomi yang lebih baik dan seimbang yaitu
struktur ekonomi dengan dititikberatkan pada industri maju yang didukung oleh
ekonomi yang tangguh. Sejalan dengan itu industri petrokimia di Indonesia seperti
industri monomer stirena, juga turut berkembang. Hal ini terutama disebabkan oleh
makin meningkatnya permintaan produkproduk plastik yang menggunakan bahan dasar monomer stirena. Dari tahun ketahun kebutuhan stirena di Indonesia semakin
meningkat baik untuk ekspor maupun impornya. Oleh karena itu, perlu diketahuinya
kondisi-kondisi optimum dalam pembuatan stirena agar menghasilkan stirena dengan
jumlah yang maksimum,dengan melakukan simulasi.
Tujuan penelitian ini adalah mengetahui kondisi-kondisi optimum untuk
perolehan stirena, selain itu juga mempelajari simulasi dengan perangkat lunak
dalam menentukan kondisi optimum dari pembuatan stirena. Metode penelitian yang
dilakukan adalah simulasi reaksi dehidrogenasi etilbenzena yang dilakukan dalam
reaktor unggun tetap dengan menggunakan Aspen Plus. Model matematika reaktor
unggun tetap diasumsikan sebagai pseudohomogenous model.Variasi kondisi operasi
yang digunakan adalah variasi rasio S/EB (steam per etilbenzena) , tekanan reaktor,
dan temperatur masukan reaktor.
Berdasarkan hasil percobaan, didapatkan bahwa semakin tinggi temperatur
maka konversi etilbenzena akan semakin tinggi. Sedangkan, semakin tinggi rasio
steam/EB maka yield stirena semakin tinggi, namun semakin rendah tekanan operasi
maka yield stirena akan menurun. Dari pengamatan pada simulasi terdapat bahwa
ada interaksi antara rasio S/EB dengan temperatur. Konversi etilbenzena optimum
didapatkan pada keadaan tekanan 2 bar, temperatur 1000 K dan rasio S/EB 10,
sedangkan yield stirena optimum didapatkan pada tekanan 1,5 bar, temperatur 900 K,
dan rasio S/EB 12.
Kata kunci : etilbenzena, stirena, dehidrogenasi, katalitik.
-
xiii
ABSTRACT
Industrial growth as part of a long-term economic venture is aimed to create
better Indonesia such as styrene monomer industry was also being developed. This is
mainly due to the increasing demand for plastic products that uses styrene monomer.
From year to year, styrene demand in Indonesia has increased both for exports and
imports. Therefore, it is necessary to know the optimum conditions in the
manufacture of styrene in order to produce the maximum amount of styrene, by
doing simulation.and balanced economic stucture, a structure which is focused to the
advanced industries with strong economics. Correspondingly, petrochemical industry
in
The purpose of this research is to determine the optimum conditions for the
yield of styrene, while also studying the use of a software to determine the optimum
conditions of manufacture of styrene. The research method is utilizing Aspen Plus
for reaction of dehydrogenation of ethylbenzene conducted in a fixed bed reactor,
started with model validation, continued with process simulation. The fixed bed
reactor operating conditions are assumed to follow pseudohomegenous model.
Variables studied in this study are the S/EB (steam/ethylbenzene) ratio, reactor
pressure, and the inlet temperature of reactor.
Based on results from the experiment, it was found that the higher the
temperature, the higher the conversion of ethylbenzene. Meanwhile, the higher the
ratio of S/EB, the higher the yield styrene. However, lower operating pressure will
increase the yield of styrene. Based on the simulation it is observed that, there is an
interaction between the ratio of S/EB with temperature. More over, the optimum
conversion of ethylbenzene is obtained at a pressure of 2 bar , at temperature 1000 K
and the ratio of S/EB 10, while the optimum yield of styrene is obtained at a pressure
of 1,5 bar, at temperature of 900 K, and the ratio of S/EB 12.
Keywords: ethylbenzene, styrene, dehydrogenation, catalytic.