BILL OF QUANTITY (BQ)

----------------------------------------------------

NAMA PAKET PEKERJAAN : PENGADAAN ALAT LABORATORIUM JURUSAN TEKNIK ELEKTRO

LINGKUP PEKERJAAN : FAKULTAS TEKNIK UNIVERSITAS SRIWIJAYA

SUMBER PENDANAAN : DIPA FAKULTAS TEKNIK UNSRI TAHUN ANGGARAN 2015

No. Nama dan Spesifikasi/Deskripsi Barang Qty Satuan Harga (Rp)

Satuan Total

A. LABORATORIUM FENOMEDA MEDAN ELEKTROMAGNETIK 1. Fiber Optik Trainer

- Fiber Optic Transmitter and Receiver; - 2 F.O. Cables Provided 50cm and 5cm long; - Snap-in Plastic F.O. Connectors; - Digital Transmission Channel – TTL Input; - Digital Receiver Channel – Amplification and Shaping; - Analog Transmission Channel – Sine Wave Input from Test Generator; - Bias Control for Setting The Working Point of The Transmitting F.O. Diode; - Analog Reception Channel with Switch-Presettable Amplification; - Probe for Digital Signals – Light Indication of The Presence of Signal on A Socket - Test Generator – Square Wave, TTL Level; - PC Interface – Undirectional Serial RS232 Link; - PC Serial Transmission Software.

1 Set

2. Antenna Trainer 1) The trainer consists of a main cabinet and a case containing the antennas, accessories and

parts required to perform the experiments.

2) The main cabinet, designed for desktop use, is made of aluminum, painted in blue and

with silk print on the front face showing the system block diagram and unit

interconnections.

3) This frequency range is immediately above the TV UHF band V and below the band

reserved for cellular communications; this avoids the disturbance of existing services.

4) The transmitter operates at a limited power level to make the risk of disturbance quite

remote.

1 Set

5) The elevated frequency allows the reduction in the size of the antennas and of the trainer

as a whole. This gives the advantage of an easier operation of the system on the test

bench of a laboratory.

6) The components of the trainer are:

- Generator Panel

- Mast and Base

- Detector

- Halfwave Dipole Antenna

- Halfwave Folded Dipole Antenna

- Yagi-Uda Antenna

- Horizontal End-Fed Antenna

- Ground Plane (Marconi) Antenna

- Slot Antenna

- Loop Antenna

3. Parabolic Antenna The parabolic-reflector antenna pattern is included in the trainer to allow an insight into this

class of devices. The frequency of operation of the trainer is sufficiently high to let the student

perceive the principles of operation.

The feeder of the antenna model consists of a dipole and a director. The position of the dipole

can be axially adjusted to experiment antenna focusing.

1 Set

4. Digital Oscilloscope - Bandwidth : 100MHz - Sampling Rate : 1GSa/s Single Channel, 500MSa/s Double Channel (Per Channel), 50GSa/s

Equivalent Rate; - Memory Depth : 18Kpts Single Channel, 9Kpts Double Channel (Per Channel); - Rise Time : <3.5ns; - Input Impedance : 1M Ohm 17pF; - Sec/Div Range : 2.5ns/div-50s/div; - Display : Color TFT 7”LCD

1 Set

B. LABORATORIUM KENDALI DAN ROBOTIKA 5. PID Trainer

- Thermal Sensors : PT100, Bi-metallic Direct Reading; - Rotational Sensor Interface : F/V Converter with Offset and Gain Control; - Temperature Sensor Interface : DC Amplifier with Offset and Gain Control; - Photo Sensor Interface : CDS Based Sensor with Disturbance Control;

1 Set

- On/Off Control : Comparator with Hysteresis Control; - Analog Source : 0 ~ +10V, 0 ~ ±10V - PID Controller : Proportional, Integral & Differential Control with Feedback; - PWM Controller /Driver : DC to PWM Driver with DC Level Offset Control; - Motor Driver : With Opto-interrupter Sensor Output; - Heater Driver : DC to PWM Driver with DC Levels Offset Control; - Accessories : Power Cord, Experiment Manual, 2mm Patch Cords, USB Cable, Software CD

6. Control Application Training System - Fixed DC Power Supply : +12V, -12V & +5V - Motor : DC with IR Encoder, R/C Servo Stepper with Eight IR Encoder - Sensor : Temperature, Light Intensity, IR - Light Source : 2X Lamps with Disturbance Control - Temperature Source : Resistive Heater with Fan - Driver : Dual H-Bridge, Relay - Alarm Indicator : Buzzer - Analog Source : 0 10V - Display : 10-point LED Bar - PC Interface : Analog I/O, Digital I/O with USB interface - Software : Interfaced with Training System to Implement Open/ Closed Loop Experiments - Signal Conditioning : V/F Converter, F/V Converter, PWM Generator, ON/OFF Controller

& Amplifier - Accessories : Power Cord, Experiment Manual, 2mm Patch Cords, Software CD, USB Cable

1 Set

7. DC Servo Motor Control Trainer Motor : DC Optical Encoder : 1000 lines/revolution Gear Ratio : 1 : 4 Rotary Potentiometer Intelligent Motion Controller PID control module Digital Encoder module DC power supply module

1 Set

8. AVR Micro Controller Training Main Motherboard : - 8-bit A/D Converter - 8-bit D/A Converter - 128X64 Graphical LCD

1 Set

- 16X4 Character LCD - Four 7-Segment Displays - 8X Monitor LEDs - 2X I2C EEPROM Interface - DC Motor with optical encoder & direction control - Stepper motor with drive circuit - R/C Servo motor with drive circuit - Programmable Peripheral Interface 82C55 - 5X4 Matrix Keypad - 2X Interrupt Source - 8-Bit DIP Switches - Serial Port Interface - USB Programmer for AVR Devices - Interface Connector for Plug-In Board for AVR Accessories : Power Cord, 2mm Patch Cords, 10-pin IDC Cable, Software CD, Experiment Manual

9. Analog to Digital Converter Trainer - 8 bit A/D Convertor Monolithic - 8 bit A/D Convertor Discrete - O/P status displayed by LED - Functional block indicated on board - Different operation modes of monolithic - A/D converter - Versatile test points for understanding Accessories : Power cord, Experiment Manual, 2mm Patch Cord

1 Set

10. Digital Converter Trainer to Analog D/A Conversion : - 4 bit Weighted Resistor - 4 Bit R-2R Ladder Network - 8 bit Single Chip D/A Converter Signal : DC Supply with toggle switches O/P Indication : On DMM or Oscilloscope Inter connections : 2mm gold plated pins Accessories : Power Cord, Experiment Manual, 2mm Patch Cords.

1 Set

11. Data Acquisition Trainer 1 Set

Technical Features : Processor : 8-bit RISC based Digital In : 16 Channel Digital Out : 16 Channel Analog In : 8-Channel Multiplexed A/D Converter : 10-Bit Analog Out : 8-Channel D/A Converter : 8-Bit Serial SPI Analog Voltage Source : +10V, ±10V Adjustable Relay : +15V SPDT Display 2X 7-Segment with BCD-7-Segment Decoder/Driver Switches : 2X 8-Bit DIP Switches USB-UART with Data PC Interface : Acquisition Software Software Features : Analog Inputs : - Channels : 8 independent channels - Resolution : 10 bits per channel - Input Range : -10Vto 10V Analog Outputs : - Channels: 2 channels - Resolution: 8 bit Digital I/Os : 16 digital I/Os, 5 Volt DC Others : - Graph for 8 input channels - Data Logging for each channel - 8-bit 7 segment for digital inputs Accessories : Power Cord, User Manual, 2mm Patch Cords, IDC Cables, USB Cable, Software

CD

Jumlah