MUHAMMAD ALFIS BUDI SANJAYA – TEG 2

Mencari radius dari Keliling dan sudut yang sudah diketahui

< k r d135 58 24,61596 49,23193180 199 63,34367 126,6873225 512 130,3797 260,759545 103 131,1437 262,2873

Command: arc

Command: Specify start point of arc or [Center]:

Specify second point of arc or [Center/End]: c

Specify center point of arc: @130.38<0

Specify end point of arc or [Angle/chord Length]: a

Specify included angle: 225

Command: mi

MIRROR

Command:

Select objects: 1 found

Select objects: Specify first point of mirror line: Specify second point of

mirror line:

Erase source objects? [Yes/No] <N>: y

MUHAMMAD ALFIS BUDI SANJAYA – TEG 2

Command: arc

Command: Specify start point of arc or [Center]:

Specify second point of arc or [Center/End]: c

Specify center point of arc: @24.62<5

Specify end point of arc or [Angle/chord Length]: a

Specify included angle: 135

Command: l

LINE

Command: Specify first point:

Specify next point or [Undo]: @62<50

Specify next point or [Undo]: *Cancel*

MUHAMMAD ALFIS BUDI SANJAYA – TEG 2

Command: arc

Command: Specify start point of arc or [Center]:

Specify second point of arc or [Center/End]: c

Specify center point of arc: @63.34<320

Specify end point of arc or [Angle/chord Length]: a

Specify included angle: 180

Command: mi

MIRROR

Command: 1 found

Specify first point of mirror line: Specify second point of mirror line:

Erase source objects? [Yes/No] <N>: y

MUHAMMAD ALFIS BUDI SANJAYA – TEG 2

Command: l

LINE

Command: Specify first point:

Specify next point or [Undo]: @145<230

Specify next point or [Undo]: *Cancel*

Command: arc

Command: Specify start point of arc or [Center]:

Specify second point of arc or [Center/End]: c

Specify center point of arc: @131.14<310

Specify end point of arc or [Angle/chord Length]: a

Specify included angle: 45

MUHAMMAD ALFIS BUDI SANJAYA – TEG 2

Command: c

CIRCLE

Command: Specify center point for circle or [3P/2P/Ttr (tan tan radius)]: ttr

Specify point on object for first tangent of circle:

Specify point on object for second tangent of circle:

Specify radius of circle: 50

Command: c

CIRCLE

Command: Specify center point for circle or [3P/2P/Ttr (tan tan radius)]:

Specify radius of circle or [Diameter] <17.0000>: 17

MUHAMMAD ALFIS BUDI SANJAYA – TEG 2

Command: _dimarc

Command:

Select arc or polyline arc segment:

Specify arc length dimension location, or [Mtext/Text/Angle/Partial/Leader]:

Dimension text = 58.01

Command: _dimarc

Command:

Select arc or polyline arc segment:

Specify arc length dimension location, or [Mtext/Text/Angle/Partial/Leader]:

Dimension text = 512

Command: _dimarc

Command:

Select arc or polyline arc segment:

Specify arc length dimension location, or [Mtext/Text/Angle/Partial/Leader]:

Dimension text = 198.99

Command: _dimarc

Command:

Select arc or polyline arc segment:

Specify arc length dimension location, or [Mtext/Text/Angle/Partial]:

MUHAMMAD ALFIS BUDI SANJAYA – TEG 2

Dimension text = 103

Command: _dimaligned

Command:

Specify first extension line origin or <select object>:

Specify second extension line origin:

Non-associative dimension created.

Specify dimension line location or

[Mtext/Text/Angle]:

Dimension text = 62

Command: _dimaligned

Command:

Specify first extension line origin or <select object>:

Specify second extension line origin:

Specify dimension line location or

[Mtext/Text/Angle]:

Dimension text = 145

MUHAMMAD ALFIS BUDI SANJAYA – TEG 2

Command: _dimlinear

Command:

Specify first extension line origin or <select object>:

Specify second extension line origin:

Specify dimension line location or

[Mtext/Text/Angle/Horizontal/Vertical/Rotated]:

Dimension text = 34

Command: _dimlinear

Command:

Specify first extension line origin or <select object>:

Specify second extension line origin:

Specify dimension line location or

[Mtext/Text/Angle/Horizontal/Vertical/Rotated]:

Dimension text = 100

MUHAMMAD ALFIS BUDI SANJAYA – TEG 2