katalog so-400 to so-420
TRANSCRIPT
-
8/9/2019 Katalog So-400 to So-420
1/1
" PRODUSEN & SUPLAYER PERALATAN LABORATORIUM PENGUJIAN BAHAN KONSTRUKSI "
Soil Testing Equipment
Jl. Tanjung Sadari No. 14 Surabaya 60177. Telp. 031-3555130 - 72727626 - 0811322426; Fax 031-3555130;
e-mail:[email protected] / [email protected]
U T A M A
12
SO-400
SO-400 Sand Cone Test SetASTM D-1556 AASHTO T-191
For determining the density of compacted soil in place.
SO-401 Sand Cone Bottle Plastic, 4 ltr cap.approx.
1 Pc
SO-402 Sand ConeFunnel
Seamless metal, turningstoper, 6 1/2" dia.
bottom, 1/2" neck dia.
1 Pc
SO-403 Base Plate Cast alumunium, 12" x12"
1 Pc
SO-404 Graduated Sand Uncemented sand,
passing # 10, retained #60, 25 kg capacity
1 bg
GE-380 Sample Can Round can, tinnedmetal
6 Pc
GE-801 Round Scoop Cast alumunium 1 Pc
GE-861 Spoon Stainless steel 1 Pc
GE-871 Trowel Pointed type 1 Pc
GE-880 Chisel Hardened type 1 Pc
GE-900 Rubber Mallet Wooden handle 1 Pc
Relative Density of Cohesionless Soils ApparatusApparatus determines the relative density of cohesionless, free-
draining soils and provides well-defined results on soils that donot respond well to conventional moisture-density impactcompaction testing. Soils for which this method is appropriate
may contain up to 12 percent of soil particles passing a No.200 (75m) sieve, depending on the distribution of particle
sizes, which causes them to have free-draining characteristics.Relative density of cohesionless soils uses vibratory
compaction to obtain maximum density and pouring to obtain
minimum density.
SO-420 Relative Density SetASTM D-4253, D-4254 ,Consist of:
SO-421 Vibrating table Table 30" X 30"
Electromagnetic 3600vpm
1unit
SO-422 0.1 cu.ft
Relative dencitymold set
Alumunium 0.1cu.ft 6"id
x 6.112insie ht by 3/8"thick
1pc
SO-423 0.5 cu.ft
Relative dencity
mold set
Alumunium 0.5 cu.ft
11"id x 9.092insie ht by
3/8" thick
1pc
SO-424 Calibration bar
plate
steel 3" W x 12" Lx 1/8"
Thick
1pc
GE-138 Dial indicator, 50 mm x 0.01 mm 1pc
SO-410
SO-410 Sand Density Cone, 12" (305 mm)For determine the in-place density of gravel
and co arse-grained soils.With the 12" (305 mm) Sand Density Cone, it is possible to
use the sand method. to determine the in-place density of
gravel and coarse-grained soils.The flange which fits on the
lower cone permits use of the apparatus on holes up to12"(305 mm) in diameter. Joining the upper and lower cones
is a special valve assembly.The metal jar has carrying handles and a clear plastic top.The
unit follows U.S.Specifications
Lower Cone. Flanged; 12" (305 mm) opening.Sand Jar. Metal; clear plastic top; with handles,circular base
plate.