iso 14001 iso 9001 - nitto australia · 2011-02-25 · s bushing r 3/8 x npt 3/8 : 1 pc. s hose...
Post on 05-Apr-2020
3 Views
Preview:
TRANSCRIPT
JQA-2042 NITTO KOHKI CO.,LTD.Machine Tools Division
ISO 9001
JQA-EM4057NITTO KOHKI CO.,LTD.
HeadquartersResearch Center
ISO 14001
Cat. No. Tk083h
NITTO KOHKI CO.,LTD.
NEEDLE SCALER
JET CHISELAIR HAMMER
AUTO CHISELPNEUMATIC SCALER
SUPER KELENPNEUMATIC CHIPPING HAMMER
AIR CHIPPERPNEUMATIC GRINDER
MYTONPNEUMATIC DIE GRINDER
AIR SONICPNEUMATIC HAND DRILL
AIR DRILLPNEUMATIC BELT SANDER
BELTONPNEUMATIC DUST-FREE SANDER
ORBITAL SANDERPNEUMATIC COMPACT SANDER
PALM ORBITAL SANDERHANDY PNEUMATIC SANDER
FREE SANDERPNEUMATIC RECIPROCATING SANDER
LINE SANDERPORTABLE PRECISION FINISHING FILE
SUPER HANDPORTABLE FINE FINISHING FILE
MICRO AIR HANDPNEUMATIC HACKSAW
SUPER SAWPORTABLE CHAMFERING TOOLS
BEVELERPNEUMATIC RADIAL CHAMFERING TOOL
CIRCUIT BEVELER
Whether you just glance through thisbooklet or give it an intensive reading, weare sure you'll agree that NITTO KOHKI'sportable hydraulic and electric machines,couplings and pneumatic hand tools areamong the finest precision engineeredequipment to be found today.
HI CUPLA Series
"delvo" Electric Screwdrivers, Spring Balancer,Linear Motor Driven Free Piston System
Machine Tools
NOTES ON USING TOOLS – Important Safety Instructions
Pneumatic & Electric Power Tools,Labor-saving plus Improved Work Efficiency!
Manufacturing
Various peening works
Rivet calking, bushinserting & removing
-
-
Sanding, grinding,chamfering, finishing
Metal working,surface smoothing
Trimming, chamferingcorner rounding
Smoothing,intermediate finishsanding
Smoothing,intermediate finishsanding
Surface sanding,rust & stain removal
Plane sanding,groove sanding
Precision filing offlash, chamfering,sanding, groovefinishing
Cuts with small radii
Various drilling works
Chamfering of largeworkplaces
Chamfering of diesand machine
Paint & rust scaling
Sheet metal cutting,paint chiseling, rivetpunching
-
-
-
Chamfering, roughgrinding, moldgrinding
Various grindingworks
Spot smoothing,surface regulation,finish sanding
Surface smoothingof steel products,finishing of pressedproducts
Surface smoothingof steel products,finishing of pressedproducts
Spot smoothing,corner rounding,surface smoothing
Spot smoothing,surface regulation
Trimming, filing innarrow space,surface regulation
To cut mild steelplates, aluminum,plastics and othermaterials
Various drilling works
-
Chamfering of steelplate
Precision filing offlash, chamfering,groove finishing
Sheet-Metal Working
1
Page
3-4
5-6
7
8
9-10
11-12
12
13-14
15
15
16
17
18
19
19
20-22
22
23
24
25
26
Spatter, chips &sludge scaling
Flux chiseling,plaster chiseling
Spatter, sludge andrust chiseling, scaling
-
Bead grinding, crosssection grinding
Bead grinding
Bead grinding, rustremoval, chamfering,section finishing
Surface sanding ofpre-welded part
Surface sanding ofpre-welded part
-
-
-
Finish filing
-
Initial boring for gascutting by welder
-
Surface chamfering ofpre-welded shaped steel parts
-
-
Paint chiseling
Paint chiseling
Paint chipping
Grinding of pre-painted surface,buffing
Pre-painted surfaceregulation
Rough grinding, rust& paint removal,spot smoothing
Ground work sanding
Ground work sanding
Sanding of pre-painted, plasteredsurface, water sanding
Sanding of plasteredsurface, intermediatefinish sanding
Precision filing ofpre-painted surface,sanding
-
Paint scrambling(w/attachment)
Chamfering of steelplate
-
Sand blasting &chiseling
Trimming, sandchiseling
Black surface scaling,scaling of ingotremnant in ladle
Sand chipping
Trimming, chamfering
Mold correction,trimming
Trimming, chamfering,spatter grinding,die-cast finishing
Trimming, surfacefinishing of die-casting
Trimming, surfacefinishing of die-casting
Mold correction
Mold correction
Trimming
-
-
-
Chamfering of castmolds
Rust scaling,welded-part finish
Various automotiverepair works
Removal of weeds,shells, concretechipping
Removal of weeds,shells, etc., concretechipping
Additional grinding,rust removal, surfacesmoothing
Precision grindingof parts
Welding chip grinding,finish grinding, fitting
Correction of grinding(finish works)
Correction of grinding(finish works)
Paint sanding ofautomotive body
Paint sanding ofautomotive body
Trimming, precisionsanding of parts
To cut the body plateof automotive vehiclesor shaped steel
Drilling, removal ofspot-welded parts
Chamfering of steelplate
-
-
-
-
-
-
Grinding of pipecross section andinner surface
Grinding of pipe &equipment surfaceface section
Precision finishing
Precision finishing
Sanding of plasteredsurface, and test piecesurface
Synthetic resin sanding
Filing, superfine filingfor profile correction
Trimming Trimming, precisionsanding of parts
Filing, superfine filingfor profile correction
To cut fiber plates.To cut fiber-reinforcedplastic plates
-
-
-
-
-
-
-
Sanding
Correction grindingof molded products,rough grinding
Finish sanding offurniture, profilecorrection of plasticproducts
Precision sanding
Precision sanding
Finish sanding, curvedsurface sanding,sanding of routergroove
Rough finish sanding
Filing, superfine filingfor profile correction
-
-
Drilling
-
-
Surface coarsening ofstone and concreteproducts
Concrete breaking,chiseling of stick
Concrete chiselingfrom framework,removal of linoleumfrom floor base
Chipping of stoneproducts
Chamfering of stoneproducts, honing
Additional grindingof constructionmaterials & parts
Grinding of parts &elements, repairservices of tools
Surface sanding ofconstructed materials
Surface sanding ofconstructed materials
Sanding of stoneproducts and floormaterials
Inner surface sandingof channeled parts
Correction sanding ofmetal parts
-
-
Sash works
Chamfering of steelplate
Chamfering of columns(HB-15B)
Welding Painting Metal Casting &Forging
Automotive &Ship Building
Chemical Engineering Wood Working & Art Construction
CONTENTS
2
Powerful scaling with multi-needles
Never skip a blow, cleans and descales all jobs fast. Gets into extremely restricted areas...
An asset in any industry...de-slagging, de-sputtering welds, cleaning, castings, brick, stonework, and other materials. Jet Chisel is a prime pneumatic perfomer in each of these and other tough job areas. Maximum performance in a light-weight,minimum- size air tool, Jet Chisel delivers years of trouble-free, efficient operation. And it's a tool that gets all the way down to the surface of matters. Quick, Jet Chisel needles adjust to any surface contour automatically. They get deep into corners, all the way into uneven surfaces, all types of curvatures making it a tool no shop should be without. It's an equally efficient time-saver in ship-board applications, too.
Specifications
Standard Accessories
MPa {kgf/cm2}
m3/min
min-1
mm
inch
kg
AJC-16
0.6 {6}
0.07
6,000
OD 2 x 150 (7 pcs.) or OD 3 x 180 (3 pcs.)
3/8
0.98
Model
Rated Air Pressure
Air Consumption (No load)
Stroke Speed
Needles to be used
Hose Size
Mass (Weight)
JT-20
0.6 {6}
0.2
4,000
OD 2 x 180 (29 pcs.) or OD 3 x 180 (12 pcs.)
3/8
2.4
JEX-20
0.6 {6}
0.2
4,000
OD 2 x 180 (29 pcs.) or OD 3 x 180 (12 pcs.)
3/8
2.75
Needle OD 3 mm x 180 mm : 3 pcs.(Needle OD 3 mm x 180 mm : 3 pcs. on the body)Bushing R 3/8 x NPT 3/8 : 1 pc.Hose Nipple R 3/8 x 3/8 : 1 pc.
Needle OD 3 mm x 180 mm : 12 pcs.(Needle OD 3 mm x 180 mm : 12 pcs. on the body)Bushing R 3/8 x NPT 3/8 : 1 pc.Hose Nipple R 3/8 x 3/8 : 1 pc.
Needle OD 3 mm x 180 mm : 12 pcs.(Needle OD 3 mm x 180 mm : 12 pcs. on the body)Bushing R 3/8 x NPT 3/8 : 1 pc.Hose Nipple R 3/8 x 3/8 : 1 pc.
Slim TypeAJC-16ModelPopular TypeJT-20Model
NEEDLE SCALER JET CHISEL SCALING
Full Automatic SystemThe only unit of it’s kind on the marketwithout springs. This means no springsto break...no irregular power... and theadvantage of low air consumption.
JEX-20ModelLow Vibration Type
190 mm 245 mm 244 mm
JET CHISEL
3
NEEDLE SCALER JET CHISELSCALING
Electric Needle Scaler
Optional Needles
EJC-32A
Hose Size
Mass (Weight)
Model
Model
Air Consumption (No load)
Rated Air Pressure
Specifications
Standerd Accessories
MPa {kgf/cm2}
m3/min
min-1
mm
inch
kg
Stroke Speed
Needles to be used
JC-16
0.6 {6}
0.15
4,000
OD 2 x 150 (29 pcs.)
3/8
1.4
JEX-24
0.6 {6}
0.27
4,000
OD 2 x 180 (53 pcs.) or OD 3 x 180 (23 pcs.)
3/8
2.7
JEX-2800A
0.6 {6}
0.43
3,700
3/8
3.1
JEX-28
0.6 {6}
0.35
4,500
OD 2 x 180 (66 pcs.) or OD 3 x 180 (28 pcs.) or OD 4 x 180 (14 pcs.)
3/8
3.5
Needle OD 2 mm x 150 mm : 29 pcs.(Needle OD 2 mm x 150 mm : 29 pcs. on the body)
Bushing R 3/8 x NPT 3/8 : 1 pc.Hose Nipple R 3/8 x 3/8 : 1 pc.
Needle OD 3 mm x 180 mm : 23 pcs. on the body6 mm Hex. Socket Screw Key : 1 pc.Bushing R 3/8 x NPT 3/8 : 1 pc.Hose Nipple R 3/8 x 3/8 : 1 pc.
The same excellent performance as our air tool!
Standard Accessories Needle OD 3 mm x 180 mm : 30 pcs. (15 pcs.)
Needle OD 4 mm x 180 mm : 14 pcs.(Needle OD 3 mm x 180 mm : 28 pcs. on the body)
Needle Supporter OD 4 mm : 1 pc.6 mm Hex. Socket Screw Key : 1 pc.Bushing R 3/8 x NPT 3/8 : 1 pc.Hose Nipple R 3/8 x 3/8 : 1 pc.
Needle OD 4 mm x 180 mm : 14 pcs.(Needle OD 3 mm x 180 mm : 28 pcs. on the body)
Needle Supporter OD 4 mm : 1 pc. Bushing R 3/8 x NPT 3/8 : 1 pc.Hose Nipple R 3/8 x 3/8 : 1 pc.
UniversalTypeJEX-24Model Heavy-duty
TypeJEX-28Model JEX-2800AModel
Operated with standard electric supply to households.Special long and slim barrel design suitable for narrow corners.Double-insulated motor does not need grounding.Free subhandle position best fit to your working situation.
PN Description QtyTA98780TA98781TA9A213TA9A214TA98782TA9A216TA9A217TA9A218TA98783TA9A220TA9A221
100 pcs.100 pcs.50 pcs.50 pcs.100 pcs.50 pcs.50 pcs.50 pcs.50 pcs.50 pcs.50 pcs.
Needle OD 2 mm x 150 mmNeedle OD 2 mm x 180 mmNeedle OD 2 mm x 300 mmNeedle OD 2 mm x 500 mmNeedle OD 3 mm x 180 mmNeedle OD 3 mm x 300 mmNeedle OD 3 mm x 500 mmNeedle OD 3 mm x 800 mmNeedle OD 4 mm x 180 mmNeedle OD 4 mm x 300 mmNeedle OD 4 mm x 500 mm
Specifications
W
A
min
min-1
mm
m
kg
115 V AC 50/60 Hz
300
2.8
230 V AC 50/60 Hz
300
1.4
EJC-32A
30
3,000OD 2 x 180 (32 pcs.) or OD 3 x 180 (15 pcs.)
5
4.5
Model
Power Supply
Rated Power Consumption
Rated Current
Rated Duty
Stroke Speed
Needles to be used
Power Cord
Mass (Weight)
JC-16Model LightweightType
158 mm 237 mm264 mm
247 mm
150 mm
520 mm
225 mm
159 mm173 mm 173 mm
Low-vibration Type
PN Description Qty ModelTP00338TP00337TQ05210TQ04554TP00290TP02244TP02245TP01499TP01461TP01462TP16475TP16301
1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.
JT-20,JEX-20
AJC-16
JEX-24
EJC-32A
JEX-28,JEX-2800A
JC-16
Needle Supporter OD 2 mmNeedle Supporter OD 3 mmNeedle Supporter OD 2 mmNeedle Supporter OD 3 mmNeedle Supporter OD 2 mmNeedle Supporter OD 2 mmNeedle Supporter OD 3 mmNeedle Supporter OD 2 mmNeedle Supporter OD 3 mmNeedle Supporter OD 4 mmNeedle Supporter OD 2 mmNeedle Supporter OD 3 mm
230 V AC only
4
SCALING
A special spool valve inside gripassures excellent durability
The A-300 Auto Chisel is designed for speeding up the repair and sheet metal works of automobiles, etc. Being light and powerful, labor can be reduced remarkably. This tool enables the work to be done in narrow space where ordinary hammering work is impossible. Thus the skill usually needed in hammering work is eliminated. The respective parts employ high material and are subjected to high precision process.
Model
Model
Specifications
Standard Accessories
MPa {kgf/cm2}
m3/min
min-1
inch
kg
A-300
0.6 {6}
0.3
2,600
1/4
1.7
Model
Rated Air Pressure
Air Consumption (No load)
Stroke Speed
Hose Size
Mass (Weight)Bushing R 1/4 x NPT 1/4 : 1 pc.Hose Nipple R 1/4 x 1/4 : 1 pc.
A-300
Optional AttachmentsPN Description Qty PN Description Qty
TP00572TP00573TP04606TP00575TP00576TP00577TP00578TP00579TP00580TP00581TP00582TP00583
1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.
No.1001 Blank ChiselNo.1002 Flat Chisel No.1003 Sheet Metal Chisel ANo.1004 Sheet Metal Chisel B No.1005 Silencer Cutting ChiselNo.1006 Rubber Bushing RemoverNo.1007 Spot Weld BoosterNo.1008 Bushing ToolNo.1009 PunchNo.1010 Bushing Removing ToolNo.1011 Sheet Metal PunchNo.1012 20 mm Bending Chisel
TP00584TA90051TP00586TP00585TP00589TP00590TP00591TP04995TP05244TP05775TP05801
-
1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.-
No.1013 Fork Chisel 24No.1014 Panel CrimperNo.1016 Fork Chisel 35No.1017 Fork Chisel 15No.1018 38 mm ScraperNo.1019 60 mm ScraperNo.1020 60 mm Concave ScraperNo.1023 Sheet Metal Chisel CNo.1024 Moilpoint ChiselNo.1025 Rivet Removing PunchNo.1026 Rivet Caulking Chisel
-
185 mm
160 mm
AIR HAMMER AUTO CHISEL
AUTO CHISEL
5
SCALING
Applications and wide variety of optional attachmentsNo. 1001 Blank Chisel (TP00572)For a variety of sheet metal work, bending,and rivet closing jobs
No. 1002 Flat Chisel (TP00573)Puts increased efficiency into scraping,peeling spot welds, and cutting off bolts andpins
No. 1003 Sheet Metal Chisel A (TP04606)Cuts shapes in sheet metal fast
No. 1004 Sheet Metal Chisel B (TP00575)Just the chisel for cutting off sheet metal bodypanel
No. 1005 Silencer Cutting Chisel (TP00576)A quick cut-off chisel for muffler piping
No. 1006 Rubber Bushing Remover (TP00577)Helps you remove idle arm sleeves andbushings in record time
No. 1007 Spot Weld Booster (TP00578)Ideal for peeling off spot welded points andcutting off pins
No. 1008 Bushing Tool (TP00579)Puts speed and ease into the job of bushinginsertion
No. 1009 Punch (TP00580)For driving out pins and rivets, and fitting andremoving bearings and races
No. 1010 Bushing Removing Tool (TP00581)A faster servicing aid in removing bushings
No. 1011 Sheet Metal Punch (TP00582)Opens holes for bolts and rivets
No. 1012 20 mm Bending Chisel (TP00583)Helps you in peening and removing slagaround welds
No. 1013 Fork Chisel 24 (TP00584)Disconnecting tie rod ends and ball joints
No. 1014 Panel Crimper (TA90051)Bending sheet metal: external body plates,doors, fenders, etc.
No. 1016 Fork Chisel 35 (TP00586)Disconnecting tie rod end ball joints
No. 1017 Fork Chisel 15 (TP00585)Disconnecting tie rod end ball joints
No. 1018 38 mm Scraper (TP00589)Peeling paint & removing rust from iron plate
No. 1019 60 mm Scraper (TP00590)Peeling paint & removing rust from iron plate
No. 1020 60 mm Concave Scraper (TP00591)Removing incrustation from pipe
No. 1023 Sheet Metal Chisel C (TP04995)Cuts shapes in sheet metal fast
No. 1024 Moilpoint Chisel (TP05244)Breaking-up concrete, removing sand fromcastings
No. 1025 Rivet Removing Punch (TP05775)Removing rivets from brake lining of heavyduty cars
No. 1026 Rivet Caulking Chisel (TP05801)Caulking brake lining of heavy duty cars
AIR HAMMER AUTO CHISEL
6
SCALING
Industrial and shipboard descaling and cleaning The unique scaler preforms scores of industrial and shipboard descaling and cleaning jobs quickly, efficiently and economically. Removes old paint and rust, dislodges solid matter or scale tar. Removes concrete adhering to panels, conveyors, mixers. Strips off bark from lumber, and scores of other applications.
Model
Specifications
Standard Accessories
MPa {kgf/cm2}
m3/min
min-1
mm
inch
mm
kg
S-250
0.6 {6}
0.27
2,500
12.7
3/8
630 x 49
4.1
Model
Rated Air Pressure
Air Consumption (No load)
Stroke Speed
Size of Chisel Shank
Hose Size
Dimension
Mass (Weight)
S-500
0.6 {6}
0.27
2,500
12.7
3/8
890 x 49
4.7
S-1000
0.6 {6}
0.27
2,500
12.7
3/8
1,470 x 49
6.1
38 mm Bend Scraper (No.2005) : 1 pc. on the body 38 mm Bend Scraper (No.2005) : 1 pc. on the body 38 mm Bend Scraper (No.2005) : 1 pc. on the body
S-1000Model
S-500ModelS-250
Model
Optional Chisels
PN Description QtyTP03645TP03646TP03647TP04010TP04552TP04553TP04554
1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.
No.2001 60 mm ScraperNo.2002 38 mm Scraper
No.2005 38 mm Bend Scraper
No.2007 60 mm Bend Scraper2001 2002 2003 2004 2005 2006 2007
PNEUMATIC SCALER SUPER KELEN
SUPER KELEN
7
SCALING
Now chipping after welding is easy!
The AIR CHIPPER are compact, lightweight and economical tools to have on hand for all kinds of chipping work. Easy chisel replacement is made to excellent operation. The straight design is suitable for operation at narrow and deep places.
In addition, the ACH-16 has many feature on the followings.....
without touching the work piece by the chisel.
structure. Especially effective on continuous operation.
lightweight type and weight only one kilogram.
Model
Rated Air Pressure
Air Consumption (No load)
Stroke Speed
Size of Chisel Shank
Hose Size
Mass (Weight)
Specifications
Standard Accessories
MPa {kgf/cm2}
m3/min
min-1
mm
inch
kg
ACH-16
0.6 {6}
0.15
6,000
OD 10.5
3/8
0.9
CH-24
0.6 {6}
0.2
4,000
12.7 sq.
3/8
1.7
Flat Chisel 20 x 120 : 1 pc. on the bodyBushing R 3/8 x NPT 3/8 : 1 pc.Hose Nipple R 3/8 x 3/8 : 1 pc.
Curved Flat Chisel 25 x 155 : 1 pc. on the bodyBushing R 3/8 x NPT 3/8 : 1 pc.Hose Nipple R 3/8 x 3/8 : 1 pc.
Model
ACH-16Model
CH-24
Optional Chisels PN Description Qty
TQ03431TQ03453TQ03549TQ03452
TQ03452TQ03549TQ03453TQ03431
1 pc.1 pc.1 pc.1 pc.
Flat Chisel 20 x 120Curved Flat Chisel 20 x 120Flat Chisel 11 x 120Flat Chisel 20 x 180
PN DescriptionChisel for Air Chipper CH-24
Chisel for Air Chipper ACH-16
QtyTP15234TP15233TP15166
TP15166TP15233TP15234
1 pc.1 pc.1 pc.
Straight Flat Chisel 12.7 x165Flat Chisel 25 x 155Curved Flat Chisel 25 x 155
147 mm
184 mm
AIR CHIPPERPNEUMATIC CHIPPING HAMMER AIR CHIPPER
8
GRINDING & SANDING
A wide variety of models are available to a particular job!
MAG-25BModel
MAG-50Model
MAG-70
0.6 {6}
0.69 (No load) 1.15 (Load)
7,100
180
1/2
3.4
0.6 {6}
0.75 (No load) 1.1 (Load)
7,600
180
3/8
Model
Rated Air Pressure
Air Consumption (No load)
Free Speed
Depressed Center Grinding Wheel
Hose Size
Mass (Weight)
Specifications
MPa {kgf/cm2}
m3/min
min-1 (rpm)
mm
inch
kg
6 mm Hex. Socket Screw Key : 1 pc.10 mm Hex. Socket Screw Key : 1 pc.41 mm Single Ended Spanner : 1 pc.Bushing R 1/2 x NPT 1/2 : 1 pc.Side Handle B : 1 pc.Grip Guard B : 1 pc.
6 mm Hex. Socket Screw Key : 1 pc.10 mm Hex. Socket Screw Key : 1 pc.Bushing R 3/8 x NPT 3/8 : 1 pc.Handle Ass’y : 1 set.Wheel Guard Ass’y : 1 set
Standard Accessories
Specifications
Standard Accessories
MPa {kgf/cm2}
m3/min
min-1 (rpm)
mm
inch
kg
MAG-25B
0.6 {6}
0.4 (No load)
22,000
58
1/4
0.55
MAGW-40
0.6 {6}
0.68 (No load) 0.82 (Load)
13,000
100
3/8
1.55
Model
Rated Air Pressure
Air Consumption
Free Speed
Depressed Center Grinding Wheel
Hose Size
Mass (Weight)
Abrasive Wheel AC #80 : 1 pc.5 mm Hex. Socket Screw Key : 1 pc.14 mm Single Ended Spanner : 1 pc.Bushing R 1/4 x NPT 1/4 : 1 pc.
6 mm Hex. Socket Screw Key : 1 pc.17 mm Single Ended Spanner : 1 pc.Bushing R 3/8 x NPT 3/8 : 1 pc.
MAG-50
0.6 {6}
0.87
12,000
125
1/4
2.2
Air Hose Sub Ass'y : 1 setExhaust Hose Ass'y : 1 setSide Handle Ass'y : 1 set4 mm Hex. Socket Screw Key : 1 pc.Pin Face Wrench : 1 pc.Bushing R 3/8 x NPT 3/8 : 1 pc.
MAGW-40Model
MAG-70Model
Depressed centerwheel 125 mm
Depressed centerwheel 58 mm
Depressed centerwheel 100 mm
Depressed centerwheel 180 mmMLG-70
ModelDepressed centerwheel 180 mmMLG-70
ModelDepressed centerwheel 180 mm
221 mm
89 mm
128 mm
65 mm
219 mm
95 mm
277 mm
100 mm
PNEUMATIC GRINDER MYTON
MYTON
102 mm102 mm
238 mm256 mmLever Type Ring Type
MLG-70 Ring TypeMLG-70 Lever Type
2.252.45
9
MAS-20BModel
Specifications
Standard Accessories
MPa {kgf/cm2}
m3/min
min-1 (rpm)
inch
kg
MAS-20B
0.6 {6}
0.4
22,000
1" , 1-1/2" and 2"
1/4
0.5
Model
Rated Air Pressure
Air Consumption (No load)
Free Speed
Abrasive Disc
Hose Size
Mass (Weight)
MAS-40
0.6 {6}
0.45
13,700
100 mm
3/8
0.9
MAS-70
0.6 {6}
0.98
7,500
180 mm
3/8
1.9
14 mm Single Ended Spanner : 1 pc.Cupla 20SH : 1 pc.Bushing R 1/4 x NPT 1/4 : 1 pc.Back-up Pad 1" : 1 pc.Back-up Pad 1-1/2" : 1 pc.Back-up Pad 2" : 1 pc.Abrasive Paper 1" x #60, #80, #100, #120 : 2 pcs. eachAbrasive Paper 1-1/2" x #60, #80, #100, #120 : 2 pcs. eachAbrasive Paper 2" x #60, #80, #100, #120 : 2 pcs. each
6 mm Hex. Socket Screw Key : 1 pc.17 mm Single Ended Spanner : 1 pc.Bushing R 1/4 x NPT 1/4 : 1 pc.Hose Nipple NPT 1/4 x 3/8 : 1 pc.
10 mm Hex. Socket Screw Key : 1 pc.41 mm Single Ended Spanner : 1 pc.Hose Nipple NPT 3/8 x 3/8 : 1 pc.Bushing M16 x NPT 3/8 : 1 pc.
MAS-40Model
MAS-70Model
Abrasive disc 1",1-1/2" & 2"
Abrasive disc100 mm
Abrasive disc180 mm
Optional Parts
PN Description QtyTA9B101TA9B102TA9B103TA9B104
25 pcs.25 pcs.25 pcs.25 pcs.
Paper 1" x #40Paper 1" x #60Paper 1" x #80Paper 1" x #100
PN Description QtyTA9B105TA9B106TA9B107TA9B108
25 pcs.25 pcs.25 pcs.25 pcs.
Paper 1" x #120Paper 1" x #180Paper 1" x #240Paper 1" x #320
Grinding Disc for MYTON MAG-25B Disc Pad for MYTON MAS-20B
1" Paper for MYTON MAS-20B
PN Description QtyTA9B109TA9B110TA9B111TA9B112
25 pcs.25 pcs.25 pcs.25 pcs.
Paper 1-1/2" x #40Paper 1-1/2" x #60Paper 1-1/2" x #80Paper 1-1/2" x #100
PN Description QtyTA9B113TA9B114TA9B115TA9B116
25 pcs.25 pcs.25 pcs.25 pcs.
Paper 1-1/2" x #120Paper 1-1/2" x #180Paper 1-1/2" x #240Paper 1-1/2" x #320
1-1/2" Paper for MYTON MAS-20B
PN Description QtyTA9B117TA9B118TA9B119TA9B120
25 pcs.25 pcs.25 pcs.25 pcs.
Paper 2" x #40Paper 2" x #60Paper 2" x #80Paper 2" x #100
PN Description QtyTA9B121TA9B122TA9B123TA9B124
25 pcs.25 pcs.25 pcs.25 pcs.
Paper 2" x #120Paper 2" x #180Paper 2" x #240Paper 2" x #320
2" Paper for MYTON MAS-20B
GRINDING & SANDING
PN Description QtyTB00119TB00120TB00121TB00155
5 pcs.5 pcs.5 pcs.
10 pcs.
AC 46 x 58 mmAC 60 x 58 mmAC 100 x 58 mmAC 80 x 58 mm
128 mm
101 mm
180 mm
82 mm
99 mm
202 mm
PN Description QtyTP18576TP18575TP18574
1 pc.1 pc.1 pc.
PAD (1") No.1PAD (1-1/2") No.2PAD (2") No.3
PNEUMATIC SANDER MYTON
10
GRINDING
The perfect tool for all tasks!
L-25BModel
Specifications
Standard Accessories
Grinding Stone for AIR SONIC L-25B (Optional) Rotary bar for AIR SONIC L-35C (Optional)
MPa {kgf/cm2}
m3/min
min-1 (rpm)
mm
inch
kg
L-25B
0.6 {6}
0.4
27,000
6
1/4
0.6 (without hose)
Model
Rated Air Pressure
Air Consumption (No load)
Free Speed
Size of Collet Chuck
Hose Size
Mass (Weight)
L-35C
0.6 {6}
0.35
37,500
6
1/4
0.45 (without hose)
14 mm Single Ended Spanner : 1 pc.Mounted Wheel No.2 : 1 pc.Mounted Wheel No.3 : 1 pc.
No.1 : 16 x 32
No.5 : 19 x 28
No.2 : 17 x 32
No.6 : 25 x 13
No.3 : 19 x 20
No.7 : 32 x 10
No.4 : 25 x 25
No.8 : 16 ballPN : TA9A277
PN : TA9A281
PN : TA9A278
PN : TA9A282
PN : TA9A279
PN : TA9A283
PN : TA9A280
No.1 : CB1C-106
PN : TP10594
PN : TA9A284
No.5 : CB5C-104
PN : TP10598
No.2 : CB2C-105
PN : TP10595
No.6 : CB6C-102
PN : TP10599
No.3 : CB3C-103
PN : TP10596
No.7 : CB7C-103
PN : TP10600
No.4 : CB4C-103
PN : TP10597
No.8 : CB8C-105
PN : TP10601
Chunk Pin : 1 pc.Bushing R 1/4 x NPT 1/4 : 1 pc.
14 mm Single Ended Spanner : 1 pc.Mounted Wheel 13 x 13 x 6 x 38 : 1 pc.Bushing R 1/4 x NPT 1/4 : 1 pc.
For all grinding, deburring and finishing jobs Special design for rotary barsL-35CModel
The high-speed mighty mite with super-efficient silencer and rear exhaust system. Wonder works on all metals, wood, and plastics, even extremely hard and exotic materials. And now that efficiency is upgraded with the addition of an air silencer and new rear exhaust system for grinding dust-it's all the more the perfect tool for toolrooms and model shops. The super efficiency of the silencermakes it possible for all craftsmen to work longer with less irritation due to noise. For precision grinding, deburring machines parts, grinding small castings, removing welding slags, shaping and finishing wood, glass and plastics. This is the compact, easy handing air tool for all tasks.
136 mm 171 mm
PNEUMATIC DIE GRINDER AIR SONIC
AIR SONIC
11
AL-55Model
Specifications
MPa {kgf/cm2}
m3/min
min-1 (rpm)
mm
inch
kg
AL-55
0.6 {6}
0.17
56,500
3
1/4
0.25
Model
Rated Air Pressure
Air Consumption (No load)
Free Speed
Size of Collet Chuck
Hose Size
Mass (Weight)
High Speed Rotation 56,500 rpm
Standard Accessories
GRINDINGDRILLING
22 mm OD
AIR SONICPNEUMATICDIE GRINDER
Smooth high speed rotation and low vibration enables precision grinding.Stepless speed change from 0 to 56,500 rpm meets a wide range of grinding applications.
Compact & light weight for comfortable operation over long periods of time. Triangular grip fits operator's hand. Special plastic grip prevents cold hands and absorbs vibration. Rear exhaust system.
Grinding Stone (Optional)
PN TB00137
PNEUMATICHAND DRILL AIR DRILL
ADR-65Model Model
Model
Rated Air Pressure
Air Consumption (No load)
Free Speed
Max. Drilling Capacity
Mass (Weight)
Specifications
Standard Accessories
MPa {kgf/cm2}
m3/min
min-1 (rpm)
mm
kg
ADR-65
0.6 {6}
0.55
6.5
0.8
ADR-100
0.6 {6}
0.67
2,000
10.0
1.1
Optional Accessory
The power and performance you needto drill deeper and faster
175 mm
154 mm
ADR-100
168 mm
221 mm
Change rotation direction by turning the valve as indicated.
Forward
Reverse
Reversible
Variablespeed adjustmentTurn the speed control nutto change the R.P.M.
AIR DRILL
12
SANDING
Rear exhaustsystem
Suitable for sanding jobs in narrow spaces, recessed corners or on curved surfaces
Specifications
Standard Accessories
MPa {kgf/cm2}
m3/min
min-1 (rpm)
m/min
mm
inch
kg
B-10N0.6 {6}
0.417,0001,120
10 x 3301/40.7
ModelRated Air PressureAir Consumption (No load)
Motor Free SpeedBelt SpeedBelt SizeHose SizeMass (Weight)
B-20N0.6 {6}0.52
17,0002,620
20 x 5201/41.2
B-30N0.6 {6}0.68
14,0002,160
30 x 5401/42.4
Abrasive Belt Z#60 x 10 mm :2 pcs. (1 pc. on the body)Abrasive Belt Z#80 x 10 mm :1 pc.Abrasive Belt Z#100 x 10 mm :1 pc.Abrasive Belt Z#120 x 10 mm :1 pc.2 mm Hex. Wrench Key :1 pc.4 mm Hex. Wrench Key :1 pc.Bushing R 1/4 x NPT 1/4 :1 pc.Silencer :1 pc.
Abrasive Belt Z#60 x 20 mm :2 pcs. (1 pc. on the body)Abrasive Belt Z#80 x 20 mm :1 pc.Abrasive Belt Z#100 x 20 mm :1 pc.Abrasive Belt Z#120 x 20 mm :1 pc.2.5 mm Hex. Wrench Key :1 pc.4 mm Hex. Wrench Key :1 pc.Bushing R 1/4 x NPT 1/4 :1 pc.Convex Shoe :1 pc.Finger Pad Ass'y :1 pc.Pan Head Screw 5 x 10 :1 pc.Pan Head Screw 6 x 10 :1 pc.
B-20NB0.6 {6}0.52
17,0002,620
20 x 5201/41.2
Abrasive Belt Z#60 x 20 mm :2 pcs. (1 pc. on the body)Abrasive Belt Z#80 x 20 mm :1 pc.Abrasive Belt Z#100 x 20 mm :1 pc.Abrasive Belt Z#120 x 20 mm :1 pc.2.5 mm Hex. Wrench Key :1 pc.4 mm Hex. Wrench Key :1 pc.Bushing R 1/4 x NPT 1/4 :1 pc.Convex Shoe :1 pc.Finger Pad Ass'y :1 pc.Pan Head Screw 5 x 10 :1 pc.Pan Head Screw 6 x 10 :1 pc.
Abrasive Belt Z#60 x 30 mm :2 pcs. (1 pc. on the body)Abrasive Belt Z#80 x 30 mm :1 pc.Abrasive Belt Z#100 x 30 mm :1 pc.4 mm Hex. Wrench Key :1 pc.5 mm Hex. Wrench Key :1 pc.Bushing R 1/4 x NPT 1/4 :1 pc.Sub Handle Ass'y :1 setGrip Guard :1 pc.Silencer :1 pc.
Optional Parts
PN Description QtyTQ10942TB07283TB05539
1 pc.1 set1 set
Shoe 6 (for 6 mm belt)Bracket 6 Ass'y (for 6 mm belt)Offset Bracket 10 Ass'y
Optional Parts for B-10NPN Description Qty
TB07109 1 setOffset Bracket 20 Ass'y
Optional Parts for B-20N/B-20NBPN Description Qty
TB08150 1 setOffset Bracket 30 Ass'y
Optional Parts for B-30N
PN Description QtyTB00241TB00242TB00243TB00244TB00245TB00246TA9A237TA9A064TB00076TB00077TB00247TB00248TB00249TA9A244
50 pcs.50 pcs.50 pcs.50 pcs.50 pcs.50 pcs.50 pcs.50 pcs.50 pcs.50 pcs.50 pcs.50 pcs.50 pcs.50 pcs.
Abrasive Belt Z#60 x 6 mmAbrasive Belt Z#80 x 6 mmAbrasive Belt Z#100 x 6 mmAbrasive Belt Z#120 x 6 mmAbrasive Belt Z#180 x 6 mmAbrasive Belt Z#240 x 6 mmAbrasive Belt AA#400 x 6 mmAbrasive Belt Z#60 x 10 mmAbrasive Belt Z#80 x 10 mmAbrasive Belt Z#100 x 10 mmAbrasive Belt Z#120 x 10 mmAbrasive Belt Z#180 x 10 mmAbrasive Belt Z#240 x 10 mmAbrasive Belt AA#400 x 10 mm
Abrasive Belt for B-10NPN Description Qty
TA99605TA99606TA99607TA99608TA99609TB00250TB00251TA9A252TA9A253TA9A254
20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.
Abrasive Belt Z#40 x 20 mmAbrasive Belt Z#60 x 20 mmAbrasive Belt Z#80 x 20 mmAbrasive Belt Z#100 x 20 mmAbrasive Belt Z#120 x 20 mmAbrasive Belt Z#180 x 20 mmAbrasive Belt Z#240 x 20 mmAbrasive Belt AA#280 x 20 mmAbrasive Belt AA#320 x 20 mmAbrasive Belt AA#400 x 20 mm
Abrasive Belt for B-20N/B-20NB Abrasive Belt for B-30NPN Description Qty
TB00252TB00253TB00254TB00255TB00256TB00257TB00258TA9A262TA9A263TA9A264
20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.
Abrasive Belt Z#40 x 30 mmAbrasive Belt Z#60 x 30 mmAbrasive Belt Z#80 x 30 mmAbrasive Belt Z#100 x 30 mmAbrasive Belt Z#120 x 30 mmAbrasive Belt Z#180 x 30 mmAbrasive Belt Z#240 x 30 mmAbrasive Belt AA#280 x 30 mmAbrasive Belt AA#320 x 30 mmAbrasive Belt AA#400 x 30 mm
PNEUMATIC BELT SANDER BELTON
BELTONB-30NModel
Belt Size30 mm (W)B-30NModelBelt Size30 mm (W)
299 mm
257 mm
B-20NModelBelt Size20 mm (W)
250 mm
243 mm
Model B-20NB Belt Size20 mm (W)
250 mm
243 mm
B-10NModel B-10NModelBelt Size10 mm (W)
152 mm
223 mm
The Idle Pulleyfor B-20N is supportedby both sides.
The Idle Pulleyfor B-20NB is supportedby one side only.
13
SANDING
Optional Parts For BABY BELTON
PN Description QtyTA9A064TB00076TB00077TB00247TB00248TB00249TA9A244
50 pcs.50 pcs.50 pcs.50 pcs.50 pcs.50 pcs.50 pcs.
Abrasive Belt Z#60 x 10 mmAbrasive Belt Z#80 x 10 mmAbrasive Belt Z#100 x 10 mmAbrasive Belt Z#120 x 10 mmAbrasive Belt Z#180 x 10 mmAbrasive Belt Z#240 x 10 mmAbrasive Belt AA#400 x 10 mm
Abrasive Belt for BB-10A
* #400 is Aluminium Belt.
PN Description QtyTB07114TB07115TB07116TB07117TB07118TB07119TB07120TB07125TB07126TB07127TB07128TB07121TB07122TB07123
20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.5 pcs.5 pcs.5 pcs.
Abrasive Belt Z#60Abrasive Belt Z#80Abrasive Belt Z#100Abrasive Belt Z#120Abrasive Belt Z#180Abrasive Belt Z#240Abrasive Belt Z#400 (*)Abrasive Belt CE#60Abrasive Belt CE#80Abrasive Belt CE#100Abrasive Belt CE#120Finish Belt A-M (Equivalent to #180)Finish Belt A-VF (Equivalent to #320)Finish Belt S-SF (Equivalent to #400)
Abrasive Belt for BB-20
PNEUMATIC BELT SANDER BELTON
Specifications
Standard Accessories
MPa {kgf/cm2}
m3/min
min-1 (rpm)
m/min
mm
inch
kg
ModelRated Air PressureAir Consumption (No load)
Motor Free SpeedBelt SpeedBelt SizeHose SizeMass (Weight)
BB-200.6 {6}0.43
16,0001,100
20 x 3301/40.8
BB-10A0.6 {6}0.25
16,0001,000
10 x 3301/40.6
Abrasive Belt Z#100 x 10 mm:1 pc. (on the body)Abrasive Belt Z#120 x 10 mm:1 pc.Abrasive Belt Z#180 x 10 mm:1 pc.Abrasive Belt Z#240 x 10 mm:1 pc.1.5 mm Hex. Wrench Key :1 pc.Cupla HA-65SN:1 pc.
Abrasive Belt Z#60 x 20 mm:1 pc. (on the body)Abrasive Belt Z#120 x 20 mm:1 pc.Abrasive Belt Z#240 x 20 mm:1 pc.2.5 mm Hex. Wrench Key :1 pc.3 mm Hex. Wrench Key :1 pc.Cupla HA-65SN:1 pc.Shoe:1 pc. Dust Cover :1 pc.
Ideal for deburring, chamfering, bead grinding, and polishing applications
Deburring & chamfering of uneven edge and plate surfaces
Detail finishing Deburning of thin materials
Curved and unique profiles
Belt rotation direction can be changed. Lever position can be changed for right or left hand operator convenience.
For left-handed user
For right-handed user
BABY BELTON BB-10AModelBelt Size10 mm (W)
246 mm
79 mm
BB-20ModelBelt Size20 mm (W)
249 mm
103 mm
right or left hand operator right or left hand operator
ReverseReverseForwardForward
14
PN Description QtyTA99582TA99583TA99584TA99585TA99586
100 pcs.100 pcs.100 pcs.100 pcs.100 pcs.
Abrasive Paper #40 Abrasive Paper #60 Abrasive Paper #80 Abrasive Paper #100Abrasive Paper #120
PN Description QtyTA99587TA99588TA99589TA99590TA99591
100 pcs.100 pcs.100 pcs.100 pcs.100 pcs.
Abrasive Paper #180 Abrasive Paper #240 Abrasive Paper #280 Abrasive Paper #320 Abrasive Paper #400
SANDING
APS-125/150
Standerd Accessories Spanner 17 : 1 pc.Bushing R 1/4 x NPT 1/4 : 1 pc.
Ergonomically designed plastic housing conforms to the operator's hand for greater control and comfort
Model
Specifications
Non Vacuum
MPa {kgf/cm2}
m3/min
min-1 (rpm)
mm
mm
kg
kg
APS-125
0.6 {6}
0.45
10,000
5
125
0.69
0.10
Model
Rated Air Pressure
Air Consumption (No load)
Motor Free Speed
Orbit Diameter
Paper Size
Mass (Weight)
Pad Mass (Weight)
APS-150
0.6 {6}
0.45
10,000
5
150
0.72
0.12Feather edging, metal preparation, and finishing work on body filler.Curved surface sanding and corner rounding in wood work.
Applications
Available from stock are Non Vacuum Models. You can modify Non Vacuum to Self Vacuum or Central Vacuum by adding a few extra parts.
For Self Vacuum & Central Vacuum
Self Vacuum Central Vacuum
Extremely light. APS-125 weights just 690 g.Simple structure for easy maintenance.Extermely low vibration.Adjustable speed.
Random orbital action produces a high-quality swirl-free finish
145 mm
PNEUMATIC COMPACT SANDER PALM ORBITAL SANDER
PALM ORBITAL SANDER
OSV-60ASand and polish metal, wood, plastic to a super fine swirl-free finish.Light weight, compact, powerful, whisper quiet, and adjustable speed regulator.Productivity and efficiency increase with the orbital sander. The lightweight unit delivers the performance of heavy duty unit with less vibration and reduced operator fatigue.
Model
Model
Specifications
MPa {kgf/cm2}
m3/min
min-1 (rpm)
mm
mm
kg
OSV-60A
0.6 {6}
0.68
8,500
10
150
2.0
for self stick papers
Model
Rated Air Pressure
Air Consumption (No load)
Motor Free Speed
Orbit Diameter
Paper Size
Mass (Weight)
Pad
245 mm
Compact yet extremely powerful.Built-in adjustable speed regulator
Standard Accessories
Bushing R 1/4 x NPT 1/4 : 1 pc.Spanner 17 : 1 pc.Brush : 1 pc.Dust Bag : 1 pc.Hose : 1 pc.Hose Band : 1 pc.
Random orbital action creates aprofessional finish
Optional Accessories
ORBITAL SANDER
The special construction includes the mounting of counter shaft below the rotor. This works in combination with the spindle and circular motions for an extra-fine finish. Speed adjustments allow selection for the best speed for the best job. Random orbital action eliminates swirl patterns and is suitable for polishing, too.
15
SANDING
Superlight, Quiet New low-vibration sander
FS-100C
Small and Lightweight for Comfort and ConvenienceFree Sander fits the hand like a glove. It's human-engineered to less tiring over longer periods of operation for big jobs, and compact enough to permit working easily in corners and other spots.
Minimized Hand VibrationThe turbine motor of FS-100C and the single-ball air motor of FS-50Aare mounted directly onto the sanding pad to minimize the discomfort of hand vibration and lessen operator fatigue caused by vibration. This along with excellent control results in a finer finish on all surface materials.
Model
Round-Pad for FS-100C
FS-50AModel
The pad is made of sponge rubber and conform easily to the shape being worked.Double-side tape is used with round pad.
This newly developed motor features a turbine disc and is capable of high speed orbits for super-fine finishing of all materials.
Optional Accessories PN Description Qty
TA99828TB02240
1 pc.1 pc.
Rubber Pad Ass'yDust Collector Ass'y
PN Description QtyTA9A367TA91474TA9A265TA9A266TA9A267TA9A268TA9A269TA9A270TA9A271TB02235
1 pc.1 pc.
200 pcs.200 pcs.200 pcs.200 pcs.200 pcs.200 pcs.200 pcs.
1 pc.
Rubber Pad Ass'yRound Pad Ass'yAbrasive paper #100Abrasive paper #120 Abrasive paper #150Abrasive paper #180 Abrasive paper #240 Abrasive paper #280 Abrasive paper #320 Dust Collector Ass'y
ModelModel
Rated Air Pressure
Air Consumption (No load)
Motor Free Speed
Orbit Diameter
Pad Size
Paper Size
Mass (Weight)
Specifications
Standard Accessories
MPa {kgf/cm2}
m3/min
min-1
mm
mm
mm
kg
FS-100C
0.6 {6}
0.2
20,000
1.5
100 x 110
114 x 140
0.5
FS-50A
0.6 {6}
0.14
15,000
1.2
75 x 82
70 x 114
0.5
Air Hose H Ass'y : 1 setBushing R 1/4 x NPT 1/4 : 1 pc.Abrasive paper #180 : 5 pcs.Abrasive paper #240 : 5 pcs.
Air Hose H Ass'y : 1 setBushing R 1/4 x NPT 1/4 : 1 pc.Abrasive paper #180 : 5 pcs.Abrasive paper #240 : 5 pcs.
For Free Sander FS-100C For Free Sander FS-50A
Powerful turbine motor
82 mm75 mm100 mm110 mm
FREE SANDERHANDY PNEUMATIC SANDER FREE SANDER
16
SANDING
Sands to a clean finish and more in less time.Compact and light.
Light sanding with piston movementA compact, lightweight and economical unit having amazingly low air consumption. Built rugged for long continuous hours of operation.Incorporates no gears and other complicated mechanisms.
Double Piston AlignmentSpecial double-action minimizes both noise and vibration so the operator works in more comfort.
Model
Specifications
Standard Accessories
MPa {kgf/cm2}
m3/min
min-1
mm
mm
mm
kg
LS-10
0.6 {6}
0.11
4,000
4
55 x 103
57 x 140
0.75
Model
Rated Air Pressure
Air Consumption (No load)
Free Speed
Stroke
Pad Size
Abrasive Paper Size
Mass (Weight)
Hose E Ass'y : 1 setBushing R 1/4 x NPT 1/4 : 1 pc.Block Rubber Pad Ass'y : 1 setAbrasive Paper #240 : 5 pcs.Abrasive Paper #320 : 5 pcs.Base Plate A Ass'y : 1 set
LS-10
Optional AccessoriesPN Description Qty
TB02244 1 pc.Dust Collector Ass'y
Special Sanding PadAn accessory Block Rubber Pad Ass'y can be easily trimmed to conform the shape beingworked.
103 mm
55 mm
PNEUMATIC RECIPROCATING SANDER LINE SANDER
LINE SANDER
17
FILING
Super efficient way of easyfiling, polishing and finishing
SH-100A
SUPER HAND replaces work.SUPER HAND is ultra-small, ultra-lightweight; yet performs with the power and efficiency of a much larger tool to meet user requirements of filling, chamfering and other jobs.It comes with the quick-change tool points for different jobs. You can work on steel, glass, brass, aluminium, wood and other materials silently. It also handles scores of big jobs with speed and ease.
Model
Rubber Pad Ass'y for SH-100A
Supporter Ass'y for SH-100A
ASH-800Model
Optional Accessories
PN Description QtyTA9A222TA9A223
TA9A224
TA9A225TA91752TA94625TB04319
5 pcs.5 pcs.
5 pcs.
5 pcs.1 set1 set1 set
Rat Tail SF-10Triangular Taper File SF-11 Half Rounded File(Rat Tail/Double Cut) SF-12Flat Bastard File SF-13Rubber Pad Ass'y for SH-100ASupporter Ass'y for SH-100ASanding Pad Ass'y for ASH-800/ASH-900
Model
Rated Air Pressure
Air Consumption (No load)
Stroke Speed
Stroke
Max. Shank dia. of Points
Mass (Weight)
Specifications
Standard Accessories
MPa {kgf/cm2}
m3/min
min-1
mm
mm
kg
SH-100A
0.6 {6}
0.24
3,700
9
6.3
1.1
ASH-800
0.6 {6}
0.23
6,500
8
5.0
0.52
ASH-900
0.6 {6}
0.2
6,300
9
5.0
0.5
Flat Bastard File SF-13 : 1 pc.Rat Tail File SF-10 : 1 pc.Triangular Taper File SF-11 : 1 pc.Half Rounded File (Rat Tail/Double Cut)
SF-12 : 1 pc.3 mm Hex. Socket Screw Key : 1 pc.Bushing R 1/4 x NPT 1/4 : 1 pc.
Flat Bastard File SF-13 : 1 pc.Rat Tail File SF-10 : 1 pc.Triangular Taper File SF-11 : 1 pc.Half Rounded File (Rat Tail/Double Cut)
SF-12 : 1 pc.2.5 mm Hex. Socket Screw Key : 1 pc.
Hi Cupla (HA-65SNG) : 1 pc.
Flat Bastard File SF-13 : 1 pc.Rat Tail File SF-10 : 1 pc.Triangular Taper File SF-11 : 1 pc.Half Rounded File (Rat Tail/Double Cut)
SF-12 : 1 pc.2.5 mm Hex. Socket Screw Key : 1 pc.
Bushing R 1/4 × NPT 1/4 : 1 pc.
For Super Hand SH-100A , ASH-800 & ASH-900
Flat Bastard File SF-13
Weight reduced by half for comfortable operation over long period of timeRat Tail File SF-10
Triangular Taper File SF-11
Half Round File (Rat Tail/Double Cut) SF-12
Sanding Pad Ass'y for ASH-800/ASH-900
187 mm177 mm
SUPER HANDPORTABLE PRECISION FINISHING FILE SUPER HAND
ASH-900Model
182 mm
18
FILINGCUTTING
PNEUMATICHACKSAW SUPER SAWPORTABLE FINE
FINISHING FILE MICRO AIR HAND
Special double-piston system achieved lowvibration while cutting speed improved!!
Model
Specifications
Standard Accessories
MPa {kgf/cm2}
m3/min
min-1
mm
kg
SSW-110
0.6 {6}
0.29
7,000
11
0.62
Model
Rated Air Pressure
Air Consumption (No load)
Stroke Speed
Stroke
Mass (Weight)
32 mm Saw Blade : 2 pcs.3 mm Hex. Socket Screw Key : 1 pc.Bushing R 1/4 x NPT 1/4 : 1 pc.
SSW-110
Optional Accessories
PN Description QtyTA9A005TA9A011TB00193TB00192
10 pcs.10 pcs.10 pcs.10 pcs.
32 mm Saw Blade24 mm Saw Blade18 mm Saw Blade14 mm Saw Blade
SSW-110 has many feature on the followings......
Low vibration is achieved by the special design of double piston mechanism.New adoption of piston rings minimized power loss and improved cutting efficiency.Longer piston stroke improved cutting speed so much.Rear exhaust system for chip-scattering-free operation.New double-lock throttle lever prevents unintended.Cutting Capacity : Max. plate thickness 3 mm (for Mild Steel)
205 mm
SUPER SAW
Select either one of the 2 modelsdepending on your applications.
1.6 mm
MAH-161.6mm
Stroke
0.5 mm
MAH-050.5mm
Stroke
Diamond files (5pcs/set)
Flat end file (PN TB07502)
Triangular end file (PN TB07504)
Round end file (PN TB07503)
Half-round end file (PN TB07505)
2
2
ø3
ø3
ø3
2
ø3
65
ø1
0.5
1
65
4.5
1.5
65
65
2
R1 Vice Holder (PN TB07506) Grinding stone plates such as ceramic grindingstones in the market can be also mounted.(Max size: Thickness 3.2 mm x Width 20 mm)
Mounting examples
MICRO AIR HAND
Standard Accessories
176 mm
21 mm OD
Fine reciprocating motion best forprecision parts filing
Specifications
MPa {kgf/cm2}
m3/min
min-1
mm
mm
kg
MAH-05
0.6 {6}
0.07
22,000
0.5
3
0.37
MAH-16
0.6 {6}
0.07
13,000
1.6
3
0.37
Model
Rated Air Pressure
Air Consumption (No load)
Stroke Speed
Stroke
Shank diameter of file
Mass (Weight)
MAH-05/MAH-16Model
MAH-05
MAH-16
19
CHAMFERING
HB-15BIdeal for chamfering before weldingUse easy-to-replace cutting bladesEach cutting blade has four working edges for good economyFinish a surface so fine that post-sanding is unnecessaryColumn R-section can be chamfered with optional attachmentNo damage of workpieces is expected as heat-hardening or
oxidization will seldom happen
Chamfering up to 15C
Standard accessoriesHex. Socket Screw Key 4,5,6 mm : each 1 pc.
Optional accessories(
Chamfering I-beamsChamfering steel plates
Model HB-15B
Power Source (Single phase)
Rated Power Consumption
Rated Current
No-load Speed
Chamfering Capacity
Chamfer Angle 15˚ - 45˚
Mass (Weight) 14
Specifications
min-1
kg
4
15C
Model
Standard accessories
Optional accessories
Compact and light for speed chamfering
( .
Handy Electric Chamfering Tool
MB-03A Double insulation
Specifications
3C
2R, 3R
Model
Power Supply (Single phase)
Rated Power Consumption
Rated Current
Chamfering Capacity
Chamfering Radius Capacity
Chamfer Angle
Rated Revolutions
Mass (Weight)
MB-03A
45˚
Model
HAND BEVELER
MINI BEVELER
PORTABLE CHAMFERING TOOLS HAND BEVELER
min-1
kg
20
Chamfer angle and width
CHAMFERING
ModelHandy Electric Chamfering Tool
EMB-0307B
3C
7C
4R
4R
Stainless Steel
Mild Steel
316.4 mm
179 mm
189.6 mm
MINI BEVELER
Standard accessories
Specifications
ECB-0203Electric Radial Chamfering Tool
Smoothly chamfering straight and curved edges(3R)
( )( )
ECB-0203
1.5C 2RStainless Steel
3C 3RMild Steel
Model
Chamfering straight edges Chamfering curved edges
136 mm
Standard accessories
SpecificationsModel
Power Supply
Rated Power Consumption
Rated Current
Rated Duty
Chamfering
Capacity
Chamfer Angle
Power Cord
Mass (Weight)
EMB-0307B
4.6
3.9
CIRCUIT BEVELER
PORTABLECHAMFERING TOOLS MINI BEVELER/CIRCUIT BEVELER
Double insulation
Double insulation
A
B
C
(mm) (mm)
A7
3.87
6.69.97.6
A3
1
33.83.8
4.43.9
A
Mild Steel
Stainless Steel
m
Chamfering
Capacity
Mild Steel
Stainless Steel
m
Model
Power Supply
Rated Power Consumption
Rated Duty
Motor No-load Speed
Chamfer Angle
Power Cord
Mass (Weight)
21
CB-02Pneumatic Radial Chamfering Tool
Optional accessories( )
( )
Standard accessories
Specifications
}
Lets you chamfer easily and smoothly no matter what the curve line is
2C
2R
Chamfering range of operation (CB-02, ECB-0203)Min. Radius Min. ThicknessMin. DepthMin. Diameter
Model
CHAMFERING
CIRCUIT BEVELER
Chamfer angle and width
Pneumatic Chamfering ToolLever Type Ring Type
AMB-0307AMBL-0307
Standard accessories
~
3C
7C
4R
Stainless Steel
Mild Steel
SpecificationsAMBL-0307, AMB-0307
Mild SteelStainless Steel
}
NOW A SMALL AIR BEVELERDOES THE BIG JOBS, TOO
AMB-0307AMBL-0307
MINI BEVELER
PORTABLECHAMFERING TOOLS MINI BEVELER/CIRCUIT BEVELER
A
B
C
( ) ( )
1
Model
Air Pressure
Air Consumption (No load)
Free Speed
ChamferingCapacity
Chamfer Angle
Mass (Weight)
Model CB-02
Air Pressure
Air Consumption (No load)
Free Speed
Chamfering Capacity
Chamfer Angle
Mass (Weight)
22
Optional Accessories for HAND BEVELER / MINI BEVELER / CIRCUIT BEVELER
HI CUPLA ACE
Body material SizeWorking pressurePressure resistancePacking materialWorking temp.range
SpecificationsEngineering plastics
1/4", 3/8", others1.5 MPa2.0 MPa
NBR-5˚C - 60˚C
For hose connection (PH)20PH-PLA30PH-PLA
For 1/4" hoseFor 3/8" hose
For hose connection (SH)HA-20SHHA-30SH
For 1/4" hoseFor 3/8" hose
20PM-PLA30PM-PLA
For Rc 1/4" For Rc 3/8"
HA-20SMHA-30SM
For Rc 1/4" For Rc 3/8"
20PFF-PLA For G 1/4"
For 5 ID x 8 OD hoseFor 6.5 ID x 10 OD hoseFor 8.5 ID x 12.5 OD hose
50PNG-PLA65PNG-PLA85PNG-PLA
For female thread connection (PM) For female thread connection (SM)
For urethane hose with spring nut connection (PNG)For 5 ID x 8 OD hoseFor 6.5 ID x 10 OD hoseFor 8.5 ID x 12.5 OD hose
HA-50SNGHA-65SNGHA-85SNG
For urethane hose with spring nut connection (SNG)
For male thread connection (PF)HA-T 20P-PLA / HA-65S x 2Hi Cupla Ace T type (for 2 branches)
Plastic Plug Hi Cupla Ace SocketP S
Plastic Cuplas with a bult-in locking mechanism!Pressure ratings comparable to steel Cuplas.
QUICK CONNECTIVE COUPLINGS FOR PNEUMATIC TOOLS HI CUPLA seriesHI CUPLA / HI CUPLA 200 (One-touch connection & Big flow rate type)
PlugFor hose connection17PH20PH30PH
For 1/4" hoseFor 1/4" hoseFor 3/8" hose
10PM20PM30PM
20PF30PF40PF
For Rc 1/8" For Rc 1/4"For Rc 3/8"
For R 1/4" For R 3/8"For R 1/2"
20PFF For G 1/4"
40PH400PH600PH800PH
For 1/2" hoseFor 1/2" hoseFor 3/4" hoseFor 1" hose
17SH20SH30SH
For 1/4" hoseFor 1/4" hoseFor 3/8" hose
40SH400SH600SH800SH
For 1/2" hoseFor 1/2" hoseFor 3/4" hoseFor 1" hose
40PM400PM600PM800PM
400PF600PF800PF
For Rc 1/2" For Rc 1/2" For Rc 3/4" For Rc 1"
10SM20SM30SM
For Rc 1/8" For Rc 1/4"For Rc 3/8"
40SM400SM600SM800SM
For Rc 1/2" For Rc 1/2" For Rc 3/4" For Rc 1"
For R 1/2" For R 3/4" For R 1"
20SF30SF40SF
For R 1/4" For R 3/8"For R 1/2"
400SF600SF800SF
For R 1/2" For R 3/4" For R 1"
For hose connection
For female thread connection For female thread connection
For male thread connection For male thread connection
200-17SH200-20SH200-30SH
For 1/4" hoseFor 1/4" hoseFor 3/8" hose
200-40SH For 1/2" hose
200-20SM200-30SM200-40SM
For Rc 1/4" For Rc 3/8"For Rc 1/2"
200-20SF200-30SF200-40SF
For R 1/4" For R 3/8"For R 1/2"
For hose connection
For female thread connection
For male thread connection
For male thread connection (parallel thiead)
SocketP S
TypeBody material SizeWorking pressurePressure resistancePacking materialWorking temp.range
Specifications
One-way shut-off cupla with an automatic shut-off valve in the socket.Important pars are hardened for excellent wear resistance and durability.
Hi CuplaSteel (chrome-plated)
1/8", 1/4", 3/8", 1/2", 3/4", 1"1.5 MPa2.0 MPa
NBR-20˚C - 80˚C
Hi Cupla 200 Steel (chrome-plated)
1/8", 1/4", 3/8", 1/2" 1.0 MPa1.5 MPa
NBR-5˚C - 60˚C
PN
TA9A093
TA9A896
TB01159
TB01791
TB01651
TB01790
TA9A386
TA9A592
TA9A638
TA9A728
TB02539
TA9A594
TB02857
TB03097
TB02862
TB03424
TQ01683
Cutting Blade 12.7 Ass'y
Cutting Blade 12.7 with hole Ass'y
Cutting Blade 12.7 with hole Ass'y
Cutting Blade 12.7 Ass'y R2
Cutting Blade 12.7 Ass'y R3
Cutting Blade 12.7 Ass'y R4
Cutting Blade 9.525 with hole Ass'y
Cutting Blade 9.525 Ass'y R2
Cutting Blade 9.525 Ass'y R3
Plate Ass'y for pipe
Attachment for small dia. pipe
Inner head Ass'y
Guide sleeve 24 mm dia. Ass'y
Plate Ass'y for straight line use
Dust Box Ass'y
Spanner T-9D
Spanner T-15D
Sales Unit
12 pcs./set
10 pcs./set
10 pcs./set
10 pcs./set
10 pcs./set
10 pcs./set
10 pcs./set
10 pcs./set
10 pcs./set
1 set
1 set
1 set
1 set
1 set
1 set
1 pc.
1 pc.
Application model
HB-15B
AMB-07
EMB-0307B, AMB-0307, AMBL-0307, ECB-0203
EMB-0307B, AMB-0307, AMBL-0307, ECB-0203
EMB-0307B, AMB-0307, AMBL-0307, ECB-0203
EMB-0307B, AMB-0307, AMBL-0307
MB-03A, CB-02
MB-03A, CB-02
MB-03A
HB-15B
EMB-0307B, AMB-0307, AMBL-0307
MB-03A
ECB-0203
ECB-0203
ECB-0203
MB-03A, CB-02
EMB-0307B, AMB-0307, AMBL-0307, ECB-0203
Remarks
For pipe 125 - 800 mm dia.
For pipe 80 - 200 mm dia.
For min. 100 mm dia.
For chamfering R2
Used with Plate Ass'y for straight line use
Description
23
OTHER PRODUCT LINES MACHINE TOOLS
Electric & Hydarulic Machine Tools,Labor-saving plus improved work efficiency
A wide range of unique tools for boring and punching
ATRA ACE autoPORTABLE MAGNETIC BASE AUTOMATIC DRILLING MACHINE
Model WA-3500
HANDY SELFERELECTRICALLY OPERATED HYDRAULIC PUNCHER
Model E25-0615
JETBROACH CUTTERS &HI-BROACH CUTTERS
ANNULAR CUTTERS
JETBROACH
HI-BROACH
SELFER ACEPORTABLE DOUBLE-ACTING HYDRAULIC PUNCHER
HYDARULIC PUMPfor SELFER ACE
Puncher & Pump
Double-Acting
Puncher
SELFER HA TypePORTABLE SINGLE-ACTING HYDRAULIC PUNCHER
HYDRAULIC PUMPfor SELFER HA Type
Puncher & Pump
Single-Acting
Puncher
ATRA ACE manual feedPORTABLE MAGNETIC BASE DRILLING MACHINE
Model AO-5575
ATRA ACE manual feedPORTABLE MAGNETIC BASE DRILLING MACHINE
Model WOJ-3200
24
MEDO pumps are unique products featuring a Linear-motor-driven Free Piston System.NITTO KOHKI has made available a complete series of air compressors and suction pumpsthat incorporate this revolutionary mechanism.These are quite appropriate as air sourcesor suction power units for variouspneumatically operated equipmentand apparatus in advanced industries.
Professional Tools for High Technology
DLV7300 SeriesDLV7500/8500 SeriesDLV7000/8000 SeriesDLV7100/7200/8100/8200 SeriesDLV3100/3300 SeriesDLV5720/5720H/5740/5740H/5750 SeriesDLV5800 SeriesDLV30SP/30HP-MKG (with built-in brushless motors)
Models
NITTO KOHKI "delvo" Electric Screwdrivers are high-quality tools for professional use,with special emphasis on precise control of torque and long life. They apply just thecorrect amount of torque –with sure, positive control always at your fingertips.They're smooth and shockless in operation, too. NITTO KOHKI's customer-orientedservice system is directly connected to sales agents to ensure thatyou can use "delvo" Electric Screwdrivers with confidence.
DLV 5720/5720H/5740 Series
TW-00/TW-0/TW-3/TW-5/TW-9/TW-15/TW-22/TW-30/TW-40/TW-50/TW-60/TW-70
TIGON Spring Balancer ImprovesWork Safety & Efficiency
Models
Capacities ranging from 0.5 ~ 70 kg.
DLV 30SP-MKG
DLV 30HP-MKG
OTHER PRODUCT LINES"delvo" Electric Screwdrivers / Spring Balancer
Linear-motor-driven Free Piston System
25
SAFETY GUIDE
Safety Precautions
Be sure to read and understand all safety precautions mentioned below and to follow the instructions given to operate eachNitto Kohki brand tool as stated in the operator’s manual. Keep operators manual close by when operating machines or toolsfor reference of safe operation and precautions.
Failure to observe the following warnings may cause a potentially hazardous situation, which if not corrected could resultin serious injury or death. To prevent the risk of fire, electric shock, and/or personal injury, proper safety guidelines shouldbe followed at all times.
Warning for ALL Machines and Tools
Notice for Air ToolsNotice for Electric Tools( 2)
( ) ()
26
DISTRIBUTED BY
Printed in Japan 09LV04- 1
Head Office 9-4, Nakaikegami 2-chome, Ohta-ku, Tokyo 146-8555 JapanPhone : +81-3-3755-1111 Fax : +81-3-3753-8791NITTO KOHKI CO.,LTD.
E-mail : overseas@nitto-kohki.co.jpURL : www.nitto-kohki.co.jp/e
Specifications and designs are subject to change at any time without notice.
Overseas Affiliates/Offices
NITTO KOHKI U.S.A. INC.TEL:+1-630-924-9393 FAX:+1-630-924-0303
NITTO KOHKI EUROPE CO., LTD.(UK)TEL:+44-1923-239-668 FAX:+44-1923-248-815
NITTO KOHKI DEUTSCHLAND GMBHTEL:+49-7157-22436 FAX:+49-7157-22437
NITTO KOHKI AUSTRALIA PTY. LTD.TEL:+61-7-3340-4600 FAX:+61-73340-4640
NITTO KOHKI CO., LTD. SINGAPOREBRANCHTEL:+65-6227-5360 FAX:+65-6227-0192
NITTO KOHKI CO., LTD. BANGKOKREPRESENTATIVE OFFICETEL:+66-2-632-0307 FAX:+66-2-632-0308
NITTO KOHKI CO., LTD. SHANGHAIREPRESENTATIVE OFFICETEL:+86-21-6415-3935 FAX:+86-21-6472-6957
NITTO KOHKI CO., LTD. SHENZHENREPRESENTATIVE OFFICETEL:+86-755-8375-2185 FAX:+86-755-8375-2187
NITTO KOHKI CO., LTD. SEOULREPRESENTATIVE OFFICE
For environmental conservation, this print is made of the pulp blended with waste paper and printed with soy-based inks.TM
top related