a6.1: buku kerja aspen plus v10 (20 muka surat pertama) · prediction of minimum fluidization...

355

LAMPIRAN 6 A6.1: Buku Kerja Aspen Plus V10 (20 muka surat pertama)

Lampiran 6: Kesarjanaan Dalam Pengajaran/Penyeliaan dan Penilaian

356


357


358


359


360


361


362


363


364


365


366


367


368


369


370


371


372


373


374


375

A6.2: Buku Kerja Aspen HYSYS V9 (Bab 1 sahaja)


376


377


378


379


380


381


382


383


384


385


386


387


388


389

A6.3: Senarai Penerbitan Tidak Berwasit Non-indexed Journals 4. Nordin, M. Z., and Hamid, M. K. A. (2014). Sustainable Integrated Process Design and Control for an Extractive

Distillation Column Systems. PERINTIS E-Journal, 4(2), 43-77. 3. Akbari, V., and Hamid, M. K. A. (2014). Prediction of Minimum Fluidization Velocity Using a CFD-PBM Coupled Model

in an Industrial Gas Phase Polymerization Reactor. Journal of Engineering Science, 10, 95-105. 2. Hamid, M. K. A., Sin, G, and Gani, R. (2011). An overview of ICAS-IPDC – A software for integrated process design

and controller design of chemical processes. PERINTIS e-Journal, 1, 1 – 9. 1. Abdullah, M. S., Hasbullah, H., Ibrahim, N., and Hamid, M. K. A. (2007). Simulation and Optimization of Butane

Autothermal Reformer for Fuel Cell Applications. Journal of Chemical and Natural Resources Engineering, Vol. 2, 1 – 13.

Theses/Books 2. Hamid, M. K. A. (2011). Model-Based Integrated Process Design and Controller Design of Chemical Processes. PhD.

Thesis, Technical University of Denmark (DTU). ISBN: 978-87-92481-39-9. 1. Hamid, M. K. A. (2003). Multiple Faults Detection using Artificial Neural Networks. Master Thesis, Universiti Teknologi

Malaysia (UTM). Book Chapters 7. Nordin, M. Z., Jais, M. Z., Othman, M. R., and Hamid, M. K. A. (2015). Three-Dimensional Sustainability Analysis for

Integrated Process Design and Control for Separation of Benzene and Toluene Mixture. In: M. A. Hashim (ed.), ICGSCE 2014, Springer Science+Business Media Singapore. 253-261. ISBN: 978-981-287-505-1.

6. Zakaria, S. A., Zakaria, M. J., Othman, M. R., and Hamid, M. K. A. (2015). 3D Sustainability Analysis of Integrated Process Design and Control for Production of Cyclohexanone. In: M. A. Hashim (ed.), ICGSCE 2014, Springer Science+Business Media Singapore. 245-252. ISBN: 978-981-287-505-1.

5. Ibrahim, N., Jensen, P. A., Dam-Johansen, K., Hamid, M. K. A., Kasmani, R. M., and Ali, R. R. (2013). Experimental Investigation of Combustion of Flash Pyrolysis Oil. In: Pogaku, R., Bono, A., Chu, C. (Eds.), Development in Sustainable Chemical and Bioprocess Technology, Springer, 181-188. ISBN: 978-1-4614-6207-1.

4. Hamid, M. K. A. (2012). A Conceptual Example of the Integrated Process-Controller Design. In Hashim, H., Hassim, M. H., Wan Alwi, S. R. A. (Eds.), Efficient Sustainable Process, Penerbit UTM Press. ISBN: 978-983-52-0897-3. 38 – 67.

3. Hamid, M. K. A., Sin, G., and Gani, R. (2009). Determination of Optimal Design and Control Decisions for Reactor-Separator Systems with Recycle. In: M. M. El-Halwagi and A. A. Linninger (Eds.). Design for Energy and the Environment. Breckenridge, Colorado: CRC Press. 593 – 602.

2. Hamid, M. K. A., Sin, G., and Gani, R. (2008). Integrated Process Design and Control of a Single Reactor System. In: K. Dam-Johansen and M. Bojer. Graduate Schools Yearbook 2008, DTU Chemical Engineering, 55 – 58.

1. Hamid, M. K. A., and Gani, R. (2007). Integration of Modelling, Design and Control for Efficient Operation of Chemical Processes. In: K. Dam-Johansen and M. Bojer. Graduate Schools Yearbook 2007, DTU Chemical Engineering, 3 – 6.

Conference Proceedings 102. Rashid, N. A., Rosely, N. A. M., Noor, M. A. M., Shamsuddin, A., Hamid, M. K. A., and Ibrahim, K. A. (2017). Quality

Prediction of Refined Bleached Deodorized Palm Oil (RBDPO) using Partial Least Square Regression Technique. The 9th. International Conference on Applied Energy (ICAE2017). Cardiff, UK. August 21-24.

101. Zubir, M. A., Rahimi, A. N., Zahran, M. F. I., Shahruddin, M. Z., Ibrahim, K. A., and Hamid, M. K. A. (2017). Systematic Design of Energy Efficient Distillation Column for Azeotrope Mixture. The 9th. International Conference on Applied Energy (ICAE2017). Cardiff, UK. August 21-24.

100. Rahimi, A. N., Mustafa, M. F., Zaine, M. Z., Rosely, N. A. M., Zahran, M. F. I., Shahruddin, M. Z., Zubir, M. A., Ibrahim, N., Ibrahim, K. A., and Hamid, M. K. A. (2017). Olefin Mixture Direct Sequence Energy Retrofitting: Feed Compositions Sensitivity Analysis. The 9th. International Conference on Applied Energy (ICAE2017). Cardiff, UK. August 21-24.

99. Rahimi, A. N., Mustafa, M. F., Zaine, M. Z., Rosely, N. A. M., Zahran, M. F. I., Shahruddin, M. Z., Zubir, M. A., Ibrahim, N., Ibrahim, K. A., and Hamid, M. K. A. (2017). Olefin Mixture Direct Sequence Retrofitting and Feed Composition Sensitivity Analysis. The 9th. International Conference on Applied Energy (ICAE2017). Cardiff, UK. August 21-24.

98. Shahruddin, M. Z., Rahimi, A. N., Zubir, M. A., Zahran, M. F. I., Ibrahim, K. A., and Hamid, M. K. A. (2017). Energy Integrated Distillation Column Sequence by Driving Force Method and Pinch Analysis for Five Components Distillation. The 9th. International Conference on Applied Energy (ICAE2017). Cardiff, UK. August 21-24.


390

97. Zahran, M. F. I., Rahimi, A. N., Zubir, M. A., Shahruddin, M. Z., Ibrahim, K. A., and Hamid, M. K. A. (2017). Control Properties of Driving Force Based Distillation Columns Design. The 9th. International Conference on Applied Energy (ICAE2017). Cardiff, UK. August 21-24.

96. Zubir, M. A., Rahimi, A. N., Zahran, M. F. I., Shahruddin, M. Z., Ibrahim, K. A., and Hamid, M. K. A. (2017). Systematic Design of Energy Efficient Distillation Column for Alcohol Mixture. The 9th. International Conference on Applied Energy (ICAE2017). Cardiff, UK. August 21-24.

95. Zahran, M. f. I., Rahimi, A. N., Zubir, M. A., Shahruddin, M. Z., Ibrahim, K. A., and Hamid, M. K. A. (2017). Relative Gain Analysis of Energy Efficient Hydrocarbon Separation Sequence. The 9th. International Conference on Applied Energy (ICAE2017). Cardiff, UK. August 21-24.

94. Shahruddin, M. Z., Rahimi, A. N., Zubir, M. A., Zahran, M. F. I., Ibrahim, K. A., and Hamid, M. K. A. (2017). Energy Integrated Distillation Columns Sequence by Driving Force Method and Pinch Analysis. The 9th. International Conference on Applied Energy (ICAE2017). Cardiff, UK. August 21-24.

93. Rashid, N. A., Rosely, N. A. M., Noor, M. A. M., Shamsuddin, A., Hamid, M. K. A., and Ibrahim, K. A. (2017). Forecasting of Refined Palm Oil Quality using Principal Component Regression. The 9th. International Conference on Applied Energy (ICAE2017). Cardiff, UK. August 21-24.

92. Balasundram, V., Ibrahim, N., Kasmani, R. M., Hamid, M. K. A., Isha, R., and Hasbullah, H. (2017). Catalytic Pyrolysis of Sugarcane Bagasse Over Cerium (rare earth) Loaded HZSM-5 Zeolite. The 9th. International Conference on Applied Energy (ICAE2017). Cardiff, UK. August 21-24.

91. Balasundram, V., Ibrahim, N., Kasmani, R. M., Hamid, M. K. A., Isha, R., and Hasbullah, H. (2017). Catalytic Pyrolysis of Sugarcane Bagasse using Molybdenum Modified HZSM-5 Zeolite. The 9th. International Conference on Applied Energy (ICAE2017). Cardiff, UK. August 21-24.

90. Balasundram, V., Ibrahim, N., Samsudin, M. D. H., Kasmani, R. M., Hamid, M. K. A., Isha, R., and Hasbullah, H. (2016). Thermogravimetric Studies on the Catalytic Pyrolysis of Rice Husk. The 9th Regional Conference on Chemical Engineering (RCChE 2016) in-conjuction with Postgraduate International Symposium on Chemical & Energy Engineering (POISChE 2016). Kuala Lumpur, Malaysia. November 21-22.

89. Rosely, N. A. M., Rashid, N. A., Mohd Noor, M. A., Hawi, N. D. A., Sepuan, S. Q., Shamsuddin, A., Ibrahim, K. A., and Hamid, M. K. A. (2016). Product Sampling Time and Process Residence Time Prediction of Palm Oil Refining Process. The 9th Regional Conference on Chemical Engineering (RCChE 2016) in-conjuction with Postgraduate International Symposium on Chemical & Energy Engineering (POISChE 2016). Kuala Lumpur, Malaysia. November 21-22.

88. Rahimi, A. N., Mustafa, M. F., Zaine, M. Z., Ibrahim, N., Ibrahim, K. A., and Hamid, M. K. A. (2016). Optimal Retrofit of Natural Gas Liquid Separation Direct Sequence and Feed Condition Sensitivity Analysis. The 9th Regional Conference on Chemical Engineering (RCChE 2016) in-conjuction with Postgraduate International Symposium on Chemical & Energy Engineering (POISChE 2016). Kuala Lumpur, Malaysia. November 21-22.

87. Balasundram, V., Ibrahim, N., Kasmani, R. M., Hamid, M. K. A., Isha, R., Hasbullah, H., Ali, R. R. (2016). Catalytic Pyrolysis of Coconut Copra and Rice Husk for Possible Maximum Production of Bio-Oil. The 9th Regional Conference on Chemical Engineering (RCChE 2016) in-conjuction with Postgraduate International Symposium on Chemical & Energy Engineering (POISChE 2016). Kuala Lumpur, Malaysia. November 21-22.

86. Sadikin, A. N., Yusof, K. M., Aziz, A. A., Hassim, M. H., Zakaria, Z. Y., Mustaffa, A. A., and Hamid, M. K. A. (2016). A Multi-Year Study of Professional Skills Development Among First Year Chemical Engineering Students. The 9th Regional Conference on Chemical Engineering (RCChE 2016) in-conjuction with Postgraduate International Symposium on Chemical & Energy Engineering (POISChE 2016). Kuala Lumpur, Malaysia. November 21-22.

85. Balasundram, V., Ibrahim, N., Kasmani, R. M., Hamid, M. K. A., Isha, R., Hasbullah, H., Ali, R. R. (2016). The Effect of Catalyst Loading (Ni-Ce/Al2O3) on Coconut Copra Pyrolysis via Thermogravimetric Analyzer. The 9th Regional Conference on Chemical Engineering (RCChE 2016) in-conjuction with Postgraduate International Symposium on Chemical & Energy Engineering (POISChE 2016). Kuala Lumpur, Malaysia. November 21-22.

84. Rahimi, A. N., Mustafa, M. F., Zaine, M. Z., Ibrahim, N., Ibrahim, K. A., and Hamid, M. K. A. (2016). Hydrocarbon Mixture Fractionation Direct Sequence Retrofiitting and Feed Condition Sensitivity Analysis. The 9th Regional Conference on Chemical Engineering (RCChE 2016) in-conjuction with Postgraduate International Symposium on Chemical & Energy Engineering (POISChE 2016). Kuala Lumpur, Malaysia. November 21-22.

83. Abu Bakar, S. H., Hamid, M. K. A., Wan Alwi, S. R., and Manan, Z. A. (2016). A Simple Case Study on Application in Synthesising a Feasible Heat Exchanger Network. The 9th Regional Conference on Chemical Engineering (RCChE 2016) in-conjuction with Postgraduate International Symposium on Chemical & Energy Engineering (POISChE 2016). Kuala Lumpur, Malaysia. November 21-22.

82. Abu Bakar, S. H., Hamid, M. K. A., Wan Alwi, S. R., and Manan, Z. A. (2016). Sensitivity Analysis of Industrial Heat Exchanger Network Design. The 9th Regional Conference on Chemical Engineering (RCChE 2016) in-conjuction with Postgraduate International Symposium on Chemical & Energy Engineering (POISChE 2016). Kuala Lumpur, Malaysia. November 21-22.

81. Abu Bakar, S. H., Hamid, M. K. A., Wan Alwi, S. R., and Manan, Z. A. (2016). An Industrial Case Study Application in Synthesising a Feasible Heat Exchanger Network. The 9th Regional Conference on Chemical Engineering (RCChE


391

2016) in-conjuction with Postgraduate International Symposium on Chemical & Energy Engineering (POISChE 2016). Kuala Lumpur, Malaysia. November 21-22.

80. Balasundram, V., Alias, N., Ibrahim, N., Hamid, M. K. A., and Hasbullah, H. (2015). Investigation on Thermochemical Behaviour of Malaysia Biomasses via Thermogravimetric Analysis (TGA). Conference on Emerging Energy and Technology (CONCEPT2015). Melaka, Malaysia. December 15-16.

79. Alias, N., Ibrahim, N., Hamid, M. K. A., and Hasbullah, H. (2015). Design of Bench-Scale Fast Pyrolysis Reactor for Bio-Fuel Production. Conference on Emerging Energy and Technology (CONCEPT2015). Melaka, Malaysia. December 15-16.

78. Rahimi, A. N., Mustafa, M. F., Zaine, M. Z., Ibrahim, N., Ibrahim, K. A., Yusoff, N., Al-Mutairi, E. M., and Hamid, M. K. A. (2015). Energy Improvement for NGLs Direct-Indirect Sequence Fractionation Unit. 2015 Conference on Emerging Energy and Technology (CONCEPT2015). Melaka, Malaysia. December 15-16.

77. Zaine, M. Z., Mustafa, M. F., Ibrahim, K. A., Ibrahim, N., and Hamid, M. K. A. (2015). Sustainability Improvement for Natural Gas Liquids of Direct Sequence Separation Process. 2015 Conference on Emerging Energy and Technology (CONCEPT2015). Melaka, Malaysia. December 15-16.

76. Balasundram, V., Ibrahim, N., and Hamid, M. K. A. (2015). Investigation on the Thermochemical Behaviour of Malaysia Biomasses via Thermogravimetric Analysis (TGA). 2nd. Workshop on Probiorefine. Johor Bahru, December, 7-8.

75. Alias, N., Ibrahim, N., Hamid, M. K. A., and Hasbullah, H. (2015). Design of Bench-Scale Fast Pyrolysis Reactor for Bio-Fuel Production. 2nd. Workshop on Probiorefine. Johor Bahru, December, 7-8.

74. Ibrahim, N., Kasmani, R. M., Hasbullah, H., Hamid, M. K. A., Ali, R. R., and Sadikin, A. N. (2015). Production of Biogas via Anaerobic Digestion from Coconut Copra Waste and Cow Manure. Global Engineering & Applied Science Conference. Tokyo, December, 2-4.

73. Zaine, M. Z., Mustafa, M. F., Ibrahim, K. A., Ibrahim, N., and Hamid, M. K. A. (2015). Design of Sustainable Energy Efficient Distillation Columns (Sustain-EEDCs) Sequence. International Conference on Fluids and Chemical Engineering (FluidsChE2015). Langkawi, Malaysia. November 25-27.

72. Rahimi, A. N., Mustafa, M. F., Zaine, M. Z., Ibrahim, N., Ibrahim, K. A., Yusoff, N., Al-Mutairi, E. M., and Hamid, M. K. A. (2015). Energy Efficiency Improvement for Natural Gas Liquids Indirect Sequence Fractionation. 28th. Symposium of Malaysian Chemical Engineers 2015 (SOMChE2015), Putrajaya, Malaysia. October 21-22.

71. Zaine, M. Z., Mustafa, M. F., Ibrahim, K. A., Ibrahim, N., and Hamid, M. K. A. (2015). Methodology Development for Sustainable Energy Efficient Distillation Columns (Sustain-EEDCs) Sequence Design. 28th. Symposium of Malaysian Chemical Engineers 2015 (SOMChE2015), Putrajaya, Malaysia. October 21-22.

70. Ibrahim, N., Jensen, P. A., Dam-Johansen, K., Balasundram, V., Hasbullah, H., Hamid, M. K. A., Kasmani, R. M., and Ali, R. R. (2015). Comparison Study of Combustion Characteristic of Biomass-Derived Pyrolysis Oil and Heavy Fuel Oil. International Conference on Low Carbon Asia (ICLCA2015), Johor, Malaysia. October 11-12.

69. Rahimi, A. N., Mustafa, M. F., Zaine, M. Z., Ibrahim, N., Ibrahim, K. A., Yusoff, N., Al-Mutairi, E. M., and Hamid, M. K. A. (2015). Optimal Synthesis of Energy Efficiency Improvement for NGLs Indirect Sequence Fractionation Unit. International Conference on Low Carbon Asia (ICLCA2015), Johor, Malaysia. October 11-12.

68. Abu Bakar, S. H., Hamid, M. K. A., Wan Alwi, S. R., and Manan, Z. A. (2015). Integrated Process Design and Control Methodology for Heat Exchanger Network. International Conference on Low Carbon Asia (ICLCA2015), Johor, Malaysia. October 11-12.

67. Zaine, M. Z., Mustafa, M. F., Ibrahim, K. A., Ibrahim, N., and Hamid, M. K. A. (2015). Sustainable Energy Efficient Distillation Columns Sequence Design of Hydrocarbon Mixtures Separation Unit. 18th. Conference of Process Integration, Modelling and Optimization for Energy Saving and Pollution Reduction (PRES’15), Kuching, Sarawak, Malaysia, August, 23-27.

66. Abu Bakar, S. H., Hamid, M. K. A., Wan Alwi, S. R., and Manan, Z. A. (2015). Initial Analysis on Heat Exchanger Networks of Fatty Acid Fractionation Plant to Optimize Energy Recovery and Controllability. 18th. Conference of Process Integration, Modelling and Optimization for Energy Saving and Pollution Reduction (PRES’15), Kuching, Sarawak, Malaysia, August, 23-27.

65. Nordin, M. Z., Othman, M. R., and Hamid, M. K. A. (2015). Application of Sustainable Integrated Process Design and Control for Four Columns Systems. 18th. Conference of Process Integration, Modelling and Optimization for Energy Saving and Pollution Reduction (PRES’15), Kuching, Sarawak, Malaysia, August, 23-27.

64. Rahimi, A. N., Mustafa, M. F., Zaine, M. Z., Ibrahim, N., Ibrahim, K. A., Yusoff, N., Al-Mutairi, E. M., and Hamid, M. K. A. (2015). Energy Efficiency Improvement in the Natural Gas Liquids Fractionation Unit. 18th. Conference of Process Integration, Modelling and Optimization for Energy Saving and Pollution Reduction (PRES’15), Kuching, Sarawak, Malaysia, August, 23-27.

63. Mohd. Yusof, K., Abdullah, F. A. P., Sadikin, A. N., Abdul Aziz, A., Mustaffa, A. A., Zakaria, Z. Y., Hamid, M. K. A., and Hassim, M. H. (2015). Integrated Course Design for Supporting Contextual Learning for First Year Engineering Students. Innovative Practices in Higher Education 2015 (I-PHEX 2015), Kuala Lumpur, August, 6.

62. Rahimi, A. N., Mustafa, M. F., Zaine, M. Z., Ibrahim, N., Ibrahim, K. A., Yusoff, N., Al-Mutairi, E. M., and Hamid, M. K. A. (2015). Energy Efficiency Improvement for Natural Gas Liquids Direct-Splitter-Direct Sequence Fractionation Unit.


392

The 1st. ICRIL-International Conference on Innovation in Science and Technology (IICIST 2015), Kuala Lumpur, April 20.

61. Zaine, M. Z., Mustafa, M. F., Ibrahim, K. A., Ibrahim, N., and Hamid, M. K. A. (2015). Sustainable Energy Efficient Distillation Columns Sequence Design of Aromatic Separation Unit. The 1st. ICRIL-International Conference on Innovation in Science and Technology (IICIST 2015), Kuala Lumpur, April 20.

60. Alias, N., Ibrahim, N., Hamid, M. K. A., Hasbullah, H., Ali, R. R., and Kasmani, R. M. (2015). Investigation of Oil Palm Wastes Pyrolysis by Thermogravimetric Analyzer for Potential Biofuel Production. The 7th International Conference on Applied Energy (ICAE2015), Abu Dhabi, March 28-31.

59. Abu Bakar, S. H., Hamid, M. K. A., Wan Alwi, S. R., and Manan, Z. A. (2015). Effect of Delta Temperature Minimum Contribution in Obtaining an Operable and Flexible Heat Exchanger Network. The 7th International Conference on Applied Energy (ICAE2015), Abu Dhabi, March 28-31.

58. Zaine, M. Z., Mustafa, M. F., Ibrahim, N., Ibrahim, K. A., Hamid, M. K. A. (2015). Minimum Energy Distillation Columns Sequence for Aromatics Separation Process. The 7th International Conference on Applied Energy (ICAE2015), Abu Dhabi, March 28-31.

57. Mustafa, M. F., Zaine, M. Z., Ibrahim, N., Ibrahim, K. A., Hamid, M. K. A. (2015). Optimal Synthesis of Energy Efficient Distillation Columns Sequence for Hydrocarbon Mixture Separation Process. The 7th International Conference on Applied Energy (ICAE2015), Abu Dhabi, March 28-31.

56. Zaine, M. Z., Mustafa, M. F., Ibrahim, K. A., Ibrahim, N., Hamid, M. K. A. (2015). Energy Efficient Distillation Columns Analysis for Aromatic Separation Process. The 3rd. International Science Postgraduate Conference 2015 (ISPC2015), Johor Bahru. February 24-26.

55. Azizan, M. F., Mustafa, M. F., Ibrahim, N., Ibrahim, K. A. I., and Hamid, M. K. A. (2015). Energy Efficient Distillation Columns Sequence for Hydrocarbon Mixtures Fractionation Process. The 3rd. International Science Postgraduate Conference 2015 (ISPC2015), Johor Bahru. February 24-26.

54. Mustafa, M. F., Abdul Samad, N. A. F., Ibrahim, N., Ibrahim, K. A., and Hamid, M. K. A. (2014). Optimal Synthesis of Energy Efficient Distillation Columns Sequence of Natural Gas Liquids. The 7th. Regional Conference on Chemical Engineering (RCChE 2014), Jogyakarta. December 2-3.

53. Mustafa, M. F., Abdul Samad, N. A. F., Ibrahim, N., Ibrahim, K. A., and Hamid, M. K. A. (2014). Optimal Synthesis of Energy Efficient Distillation Columns Sequence Using Driving Force Method. The 2nd. International Seminar on Fundamental and Application of Chemical Engineering (ISFAChE 2014), Bali. November 12-13.

52. Mustafa, M. F., Gotowo, A., Abdul Samad, N. A. F., Ibrahim, N., Ibrahim, K. A., and Hamid, M. K. A. (2014). Minimum Energy Distillation Column Sequence for NGLs Fractionation Process. The 2nd. International Seminar on Fundamental and Application of Chemical Engineering (ISFAChE 2014), Bali. November 12-13.

51. Mustafa, M. F., Abdul Samad, N. A. F., Ibrahim, K. A., and Hamid, M. K. A. (2014). Design of Energy Efficient Distillation Columns for Separation of Oxygenates Process. 27th Symposium of Malaysian Chemical Engineers (SOMChE 2014) in conjunction with 21st Regional Symposium on Chemical Engineering (RSCE 2014), Subang Jaya. October 29-30.

50. Zakaria, S. A., Zakaria, M. J., M. Z., Othman, M. R., and Hamid, M. K. A. (2014). Integrated Tool for Assessing Sustainability Index of Reactor Systems. 27th Symposium of Malaysian Chemical Engineers (SOMChE 2014) in conjunction with 21st Regional Symposium on Chemical Engineering (RSCE 2014), Subang Jaya. October 29-30.

49. Nordin, M. Z., Jais, M. Z., Othman, M. R., and Hamid, M. K. A. (2014). Integrated Tool for Assessing Sustainability Index of Distillation Column Systems. 27th Symposium of Malaysian Chemical Engineers (SOMChE 2014) in conjunction with 21st Regional Symposium on Chemical Engineering (RSCE 2014), Subang Jaya. October 29-30.

48. Zakaria, S. A., Zakaria, M. J., Othman, M. R., and Hamid, M. K. A. (2014). 3D Sustainability Analysis of Integrated Process Design and Control for Production of Cyclohexanone. The 2nd International Conference on Global Sustainability and Chemical Engineering (ICGSCE2014), Kuala Lumpur. August 20 - 22.

47. Mustafa, M. F., Abdul Samad, N. A. F., Ibrahim, N., Ibrahim, K. A., and Hamid, M. K. A. (2014). Energy Efficient Distillation Columns Design for Rettrofit NGLs Fractionation Process. The 2nd International Conference on Global Sustainability and Chemical Engineering (ICGSCE2014), Kuala Lumpur. August 20 - 22.

46. Alias, N., Ibrahim, N, and Hamid, M. K. A. (2014). Thermogravimetric Analysis of Rice Husk and Coconut Pulp for Potential Biofuel Production by Flash Pyrolysis. The 2nd International Conference on Global Sustainability and Chemical Engineering (ICGSCE2014), Kuala Lumpur. August 20 - 22.

45. Nordin, M. Z., Jais, M. Z., Othman, M. R., and Hamid, M. K. A. (2014). Three-Dimensional Sustainability Analysis for Integrated Process Design and Control for Separation of Benzene and Toluene Mixture. The 2nd International Conference on Global Sustainability and Chemical Engineering (ICGSCE2014), Kuala Lumpur. August 20 - 22.

44. Abu Bakar, S. H., Hamid, M. K. A., Wan Alwi, S. R., and Manan, Z. A. (2014). Controllability Analysis on Delta Temperature Minimum to Obtain Operable and Flexible Heat Exchanger Networks. The 5th International Graduate Conference on Engineering, Science and Humanities (IGCESH2014), Johor Bahru. August 19 - 21.

43. Nordin, M. Z., Jais, M. Z., and Hamid, M. K. A. (2014). The Application of Integrated Sustainability Tool for Separation of Benzene and Toluene Mixture. The 5th International Graduate Conference on Engineering, Science and Humanities (IGCESH2014), Johor Bahru. August 19 - 21.


393

42. Zakaria, S. A., Zakaria, M. J., and Hamid, M. K. A. (2014). The Application of Integrated Sustainability Tool for Production of Cyclohexanone. The 5th International Graduate Conference on Engineering, Science and Humanities (IGCESH2014), Johor Bahru. August 19 - 21.

41. Mustafa, M. F., Abdul Samad, N. A. F., Ibrahim, K. A., Ibrahim, N. and Hamid, M. K. A. (2014). Design of Energy Efficient Distillation Columns Systems. International Symposium on Green Manufacturing and Applications (ISGMA 2014), Busan, Korea. 24 – 28 June, pp. 66-69.

40. Mustafa, M. F., Abdul Samad, N. A. F., and Hamid, M. K. A. (2014). Methodology Development for Flexible and Operable Energy Integrated Distillation Column Systems. The 3rd International Conference on Process Engineering and Advanced Materials (ICPEAM2014), Kuala Lumpur. June 3 – 5.

39. Zakaria, S. A., Zakaria, M. J., and Hamid, M. K. A. (2014). Sustainable Integrated Process Design and Control for a Continuous-Stirred Tank Reactor System. The 3rd International Conference on Process Engineering and Advanced Materials (ICPEAM2014), Kuala Lumpur. June 3 – 5.

38. Nordin, M. Z., Jais, M. Z., and Hamid, M. K. A. (2014). Sustainable Integrated Process Design and Control for a Distillation Column System. The 3rd International Conference on Process Engineering and Advanced Materials (ICPEAM2014), Kuala Lumpur. June 3 – 5.

37. Mustafa, M. F., Abdul Samad, N. A. F., and Hamid, M. K. A. (2014). Methodology Development for Designing Energy Efficient Distillation Column Systems. The 6th. International Conference on Applied Energy (ICAE2014), Taipei, Taiwan. May 30 – June 2.

36. Abu Bakar, S. H., Hamid, M. K. A., Wan Alwi, S. R., and Manan, Z. A. (2014). Design Target Selection for Heat Exchanger Network Synthesis Based on Trade-Off Plot. The 6th. International Conference on Applied Energy (ICAE2014), Taipei, Taiwan. May 30 – June 2.

35. Alias, N., Ibrahim, N, and Hamid, M. K. A. (2014). An Investigation of Oil Palm Wastes Pyrolysis by Thermogravimetric Analyzer for Potential Biofuel Production. The 6th. International Conference on Applied Energy (ICAE2014), Taipei, Taiwan. May 30 – June 2.

34. Alias, N., Ibrahim, N, and Hamid, M. K. A. (2014). Pyrolysis of Oil Palm Empty Fruit Bunch by Thermogravimetric Analysis. The 6th. International Conference on Applied Energy (ICAE2014), Taipei, Taiwan. May 30 – June 2.

33. Esfeh, H. K., and Hamid, M. K. A. (2014). Temperature effect on proton exchange membrane fuel cell performance part II: Parametric study. The 6th. International Conference on Applied Energy (ICAE2014), Taipei, Taiwan. May 30 – June 2.

32. Esfeh, H. K., and Hamid, M. K. A. (2014). Temperature effect on proton exchange membrane fuel cell performance part I: Modelling and validation. The 6th. International Conference on Applied Energy (ICAE2014), Taipei, Taiwan. May 30 – June 2.

31. Akbari, V., and Hamid, M. K. A. (2013). Prediction of Minimum Fluidization Velocity Using a CFD-PBM Coupled Model in an Industrial Gas Phase Polymerization Reactor. National Colloquium on Process Control (NCPC 2013), Universiti Sains Malaysia, Pulau Pinang. 1 Oct.

30. Borhani, T. N. G., Akbari, V., Hamid, M. K. A., Manan, Z. A. (2013). Rate-Based Simulation of DEA Promoted Potassium Carbonate Process. 6th International Conference on Process Systems Engineering (PSE Asia 2013), Kuala Lumpur, Malaysia. 25-27 June, 338 – 343.

29. Akbari, V., Borhani, T. N. G., Esfeh, H. K., and Hamid, M. K. A. (2013). Computational Fluid Dynamic and Population Balance Modeling of Industrial Fluidized Bed Polymerization Reactor. 6th International Conference on Process Systems Engineering (PSE Asia 2013), Kuala Lumpur, Malaysia. 25-27 June, 745 – 751.

28. Lawal, S., Halimoon, H., Zainal Alam, M. N. H., and Hamid, M. K. A. (2013). Optimization of Microbioreactor Operating Volume by Using Attainable Region Approach. 6th International Conference on Process Systems Engineering (PSE Asia 2013), Kuala Lumpur, Malaysia. 25-27 June, 720 - 725.

27. Mohd-Yusof, K., Hamid, M. K. A., Hassim, M. H., Harun, S., and Syed Hassan, S. A. H. (2013). Problem Based Learning for Process Control and Dynamics, Part 1: Effective Planning for a Typical Course. 6th International Conference on Process Systems Engineering (PSE Asia 2013), Kuala Lumpur, Malaysia. 25-27 June, 687 - 694.

26. Abu Bakar, S. H., Hamid, M. K. A., Wan Alwi, S. R., and Manan, Z. A. (2013). Integrated Process Design and Control of Heat Exchanger Networks for Biomethanol Production Plant. 6th International Conference on Process Systems Engineering (PSE Asia 2013), Kuala Lumpur, Malaysia. 25-27 June, 421 - 426.

25. Abu Bakar, S. H., Hamid, M. K. A., Wan Alwi, S. R., and Manan, Z. A. (2013). Flexible and Operable Heat Exchanger Networks, 11th International Conference on Chemical and Process Engineering (ICheaP-11), Milan, Italy. June 2 – 5.

24. Ibrahim, N., Jensen, P. A., Dam-Johansen, K., Hamid, M. K. A., Kasmani, R. M., Ali, R. R., and Hasbullah, H. (2013). Experimental Investigation of Flash Pyrolysis Oil Droplet Combustion. 11th International Conference on Chemical and Process Engineering (ICheaP-11), Milan, Italy. June 2 – 5.

23. Hamid, M. K. A. (2012). Development of a Sustainable Integrated Process Design and Control for Chemical Processes. In: Bono, A., and Sipaut, C. S. (Eds.). The 26th Symposium of Malaysian Chemical Engineers (SOMChE 2012) with the 4th International Conference on Chemical and Bioprocess Engineering (ICCBPE 2012), Sabah, Malaysia. 629 – 634.

22. Abu Bakar, S. H., Hamid, M. K. A., Wan Alwi, S. R., and Manan, Z. A. (2012). Development of a New Model-Based Integrated Process Design and Control for Heat Exchanger Networks. In: Bono, A., and Sipaut, C. S. (Eds.). The 26th


394

Symposium of Malaysian Chemical Engineers (SOMChE 2012) with the 4th International Conference on Chemical and Bioprocess Engineering (ICCBPE 2012), Sabah, Malaysia. 883 – 891.

21. Hamid, M. K. A., Sin, G., and Gani, R. (2010). Application of Decomposition Methodology to Solve Integrated Process Design and Controller Design Problems for Reactor-Separator-Recycle Systems. 3rd. Dansk KemiingeniorKonference, Kgs. Lyngby, Denmark. 16 – 17 June.

20. Hamid, M. K. A., Sin, G., and Gani, R. (2010). Application of Decomposition Methodology to Solve Integrated Process Design and Controller Design Problems for Reactor-Separator-Recycle Systems. CAPE Forum 2010, Aachen, Germany. 11 – 12 March.

19. Hamid, M. K. A., Sin, G., and Gani, R. (2010). Application of Decomposition Methodology to Solve Integrated Process Design and Controller Design Problems for Reactor-Separator-Recycle Systems. DYCOPS 2010 (9th. International Symposium on Dynamics and Control of Process Systems), Lueven, Belgium. July 5 -7, 449 – 454.

18. Alvarado-Morales, M., Hamid, M. K. A., Sin, G., Gernaey, K. V., Woodley, J. M., and Gani, R. (2009). A Model-Based Methodology for Simultaneous Design and Control of a Bioethanol Production Process. 10th. International Symposium on Process Systems Engineering, Salvador de Bahia, Brazil. 18 – 2- August.

17. Hamid, M. K. A., Sin, G., and Gani, R. (2009). A New Model-Based Methodology for Simultaneous Design and Control of Reaction-Separation Systems with Recycle. 19th. European Symposium on Computer Aided Process Engineering (ESCAPE19), Krakow, Poland. 14 – 17 June.

16. Hamid, M. K. A., Sin, G., and Gani, R. (2009). Determination of Optimal Design and Control Decisions for Reactor-Separator Systems with Recycle. FOCAPD 2009 (7th. International Conference on the Foundations of Computer-Aided Process Design), Breckenridge, CO. 7 – 12 June.

15. Hamid, M. K. A., and Gani, R. (2008). A Model-Based Methodology for Simultaneous Process Design and Control for Chemical Processes. FOCAPO 2008 (Foundations of Computer-Aided Process Operations), Cambridge, Massachusetts. June 29 – July 2. 205 – 208.

14. Ahmad, A., Abdul Samad, N. A. F., and Hamid, M. K. A. (2007). Product Optimization of a Fed-Batch Fermentation Processes. European Congress of Chemical Engineering (ECCE-6), Copenhagen, Denmark. Sept. 2007, 16 – 20.

13. Hamid, M. K. A., Ibrahim, N., Ibrahim, K. A. and Ahmad, A. (2006). Simulation of hydrogen production for mobile fuel cell applications via autothermal reforming of methane. International Conference on Natural Resources Engineering and Technology (INRET 2006), Putrajaya, Malaysia. 24-25 July 2006.

12. Mohd. Yusof, K., Hamid, M. K. A., Abu Hassan, M. A., Hassim, M. H., Syed Hassan, S. A. H., and Tasir, Z. (2005). Outcomes of Problem-Based Learning Implementation from Students’ Perspective. Regional Conference on Engineering Education (RCEE 2005), Johor Bahru, 12-13 December 2005.

11. Hamid, M. K. A., Abu Hassan, M. A., Mohd. Yusof, K. and Syed Hassan, S. A. H. (2005). Crafting Effective Engineering Problems for Problem-Based Learning: Universiti Teknologi Malaysia Experiences. Regional Conference on Engineering Education (RCEE 2005), Johor Bahru, 12-13 December 2005.

10. Mohd. Rohani, J., Abu Hassan, M. A., Syed Hassan, S. A. H., Hamid, M. K. A. and Mohd.Yusof, K. (2005). Assessing the Effectiveness of Problem Based Learning (PBL) using Quality Function Deployment (QFD): Students Perspective. Regional Conference on Engineering Education (RCEE 2005), Johor Bahru, 12-13 December 2005.

9. Syed Hassan, S. A. H., Mohd. Yusof, K., Hamid, M. K. A. and Hassim, M. H. (2005). Problem-based Learning in Facilities Planning: A Pilot Implementation, 4th Asia-Pacific Forum on Engineering and Technology Education, Bangkok, Thailand, 26-29 September 2005.

8. Hamid, M. K. A., Abu Hassan, M. A., Hassim, M. H., and Mohd. Yusof, K. (2004). Implementation of Problem-Based Learning in a Typical Engineering Classroom. Conference on Engineering Education, Kuala Lumpur, 14-15 Dec. 2004.

7. Abu Hassan, M. A., Mohd. Yusof, K., Hamid, M. K. A., Hassim, M. H., Abd. Aziz, A., and Syed Hassan, S. A. H. (2004). A Review and Survey of Problem-Based Learning Application in Engineering Education. Conference on Engineering Education, Kuala Lumpur, 14-15 Dec. 2004.

6. Mohd. Yusof, K., Abd. Aziz, A., Hamid, M. K. A., Abu Hassan, M. A., Hassim, M. H., Syed Hassan, S. A. H., and Azila, N. M. A. (2004). Problem-Based Learning in Engineering Education: A Viable Alternative for Shaping Graduates for the 21st Century? Conference on Engineering Education, Kuala Lumpur, 14-15 Dec. 2004.

5. Hassim, M. H., Hamid, M. K. A., Abu Hassan, M. A., Mohd. Yusof, K., Syed Hassan, S. A. H., and Esa, M. (2004). Enhancing Learning Through Cooperative Learning: UTM Experience. Conference on Engineering Education, Kuala Lumpur, 14-15 Dec. 2004.

4. Ahmad, A. and Hamid, M. K. A. (2003). Pipeline Leak Detection System in a Palm Oil Fractionation Plant Using Artificial Neural Network. International Conference on Chemical and Bioprocess Engineering (ICCBPE), Sabah, Malaysia. August 2003.

3. Ahmad, A. and Hamid, M. K. A. (2002). Detection of Multiple Sensor Faults in a Palm Oil Fractionation Plant Using Artificial Neural Network. Regional Symposium on Chemical Engineering (RSCE 2002) in conjunction with 16th Symposium of Malaysian Chemical Engineers (SOMChE 2002), Petaling Jaya, Malaysia.

2. Ahmad, A. and Hamid, M. K. A. (2002). Detection of Sensor Failure In a Palm Oil Fractionation Plant Using Artificial Neural Network. International Conference On Artificial Intelligence In Engineering and Technology ICAIET, Sabah, Malaysia.


395

1. Ahmad, A. and Hamid, M. K. A. (2001). Neural Networks for Process Monitoring and Fault Detection: Application to Tennessee Eastman Plant. Malaysian Science & Technology Congress, Melaka, Malaysia.

Other Publications 1. Hamid, M. K. A. (2013). Aspen HYSYS: An Introduction to Chemical Engineering Simulation. LAP Lambert Academic

Publishing. ISBN: 978-3-659-35879-1. A6.4: Bukti Pengiktirafan Terkini


396


397


398


399


400


401


402


403


404


405


406


407


408


409


410


411


412


413


414


415


416


417


418


419


420


421


422


423


424


425


426


427


428


429


430


431


432


433


434


435


436

A6.5: Bukti Perlantikan Kepimpinan Terkini


437


438


439


440


441


442


443


444


445


446


447


448


449


450


451


452


453


454


455


456


457


458

a6.1: buku kerja aspen plus v10 (20 muka surat pertama) · prediction of minimum fluidization...

Documents