tutorial v ray

7/27/2019 Tutorial v Ray

1/13

memberikan efek lensa/sinar matahari pada program Photoshop .. (hasilnya seperti gambar

diatas), selamat mengikuti

1. Siapkan gambar yang akan diberi efek lensa/sinar matahari, lalu pilih menu filterrenderlens flare (lihat gambar dibawah)

2. akan muncul kotak dialog lens

flare, posisikan matahari no 1 keposisi yang diinginkan, klik tahan geser.. dan atur pula

parameter yang lainnya (lihat gambar di bawah)
http://2.bp.blogspot.com/_yeuMOHADSG4/Sslbm00fktI/AAAAAAAABeI/hXhRlF-JDIk/s1600-h/tutorial+photoshop.JPG


2/13

3. berikut gambar akhir setelah diberikan efek

lensa/sinar matahari

4. wis rampung, tunggu tutorial

yang lainnya

Popularity: 1% [?]

Kata Kunci Artikel ini
http://alexking.org/projects/wordpress/popularity-contesthttp://alexking.org/projects/wordpress/popularity-contesthttp://alexking.org/projects/wordpress/popularity-contesthttp://4.bp.blogspot.com/_yeuMOHADSG4/Sslbl2kBuGI/AAAAAAAABd4/68ft3XfjBWI/s1600-h/tutorial+photoshop+3.JPGhttp://1.bp.blogspot.com/_yeuMOHADSG4/SslbmCkJEsI/AAAAAAAABeA/PCPLJ2wLb2U/s1600-h/tutorial+photoshop+2.JPGhttp://4.bp.blogspot.com/_yeuMOHADSG4/Sslbl2kBuGI/AAAAAAAABd4/68ft3XfjBWI/s1600-h/tutorial+photoshop+3.JPGhttp://1.bp.blogspot.com/_yeuMOHADSG4/SslbmCkJEsI/AAAAAAAABeA/PCPLJ2wLb2U/s1600-h/tutorial+photoshop+2.JPGhttp://alexking.org/projects/wordpress/popularity-contest


3/13

efek cahaya matahari photoshop,efek sinar matahari photoshop,tutorial photoshop lanjut,cara

membuat efek sinar matahari di photoshop,membuat efek cahaya matahari dengan

photoshop,cara membuat efek cahaya matahari di photoshop,efek matahari pada photoshop

October 5th, 2009 inTips and Triks,Tutorial|

Merubah Tampilan AutoCAD 2007 ke Tampilan Classic

Ok, langsung wae, ndak selak

buka puasa, bar kui kan sholat tarawih, btw koe puasa ndak? maklum hawa-hawane lagi

kemrungsung, he3x.. saiki aku akan menjelaskan kepada anda-anda kabeh cara merubah

tampilan AutoCAD2007 ke tampilan classic (lihat gambar diatas)dan tutorial ini bisa juga

digunakan pada Autocad versi 2007 keatas, perhatikan dengan seksama, sek wis ngerti menengo

wae, sek belum ngerti diperhatikan, ojo rame wae.. monggo..

1. Buka program AutoCAD 2007, akan tampil seperti gambar dibawah ini.

2. Aktifkan toolbar view danvisual style, caranya, klik kanan disembarang toolbar, lalu aktifkan tollbar tersebut
http://blogargajogja.com/category/tips-and-trikshttp://blogargajogja.com/category/tips-and-trikshttp://blogargajogja.com/category/tips-and-trikshttp://blogargajogja.com/category/tutorialhttp://blogargajogja.com/category/tutorialhttp://blogargajogja.com/category/tutorialhttp://blogargajogja.com/tutorial/merubah-tampilan-autocad-2007-ke-tampilan-classic.htmlhttp://4.bp.blogspot.com/_yeuMOHADSG4/SqCyKTEUtGI/AAAAAAAABa4/rF9gHMPHsR4/s1600-h/tutorial+autocad+4.JPGhttp://2.bp.blogspot.com/_yeuMOHADSG4/SqCyKy48cOI/AAAAAAAABbA/5kD3A_O2MkY/s1600-h/tutorial+autocad+5.jpghttp://4.bp.blogspot.com/_yeuMOHADSG4/SqCyKTEUtGI/AAAAAAAABa4/rF9gHMPHsR4/s1600-h/tutorial+autocad+4.JPGhttp://2.bp.blogspot.com/_yeuMOHADSG4/SqCyKy48cOI/AAAAAAAABbA/5kD3A_O2MkY/s1600-h/tutorial+autocad+5.jpghttp://blogargajogja.com/tutorial/merubah-tampilan-autocad-2007-ke-tampilan-classic.htmlhttp://blogargajogja.com/category/tutorialhttp://blogargajogja.com/category/tips-and-triks


4/13

3. klik pada tollbar view pilih top,lalu klik 2d wireframe pada toolbar visual style, lalu klik pada tombol grid (atau tekan F7 pada

keyboard), lebih jelas lihat gambar dibawah..

4. jika benar akan tampil seperti
http://4.bp.blogspot.com/_yeuMOHADSG4/SqCyJnp3miI/AAAAAAAABao/Evwhl1RbAFI/s1600-h/tutorial+autocad+2.JPGhttp://4.bp.blogspot.com/_yeuMOHADSG4/SqCyKFRVKaI/AAAAAAAABaw/15MUE1WJIdU/s1600-h/tutorial+autocad+1.JPGhttp://4.bp.blogspot.com/_yeuMOHADSG4/SqCyJnp3miI/AAAAAAAABao/Evwhl1RbAFI/s1600-h/tutorial+autocad+2.JPGhttp://4.bp.blogspot.com/_yeuMOHADSG4/SqCyKFRVKaI/AAAAAAAABaw/15MUE1WJIdU/s1600-h/tutorial+autocad+1.JPG


5/13

gambar dibawah ibni

5. selesai

Popularity: 1% [?]

September 4th, 2009 inTips and Triks,Tutorial|

Tutorial Penggunaan Photometric IES Lights pada 3Ds Max

Akhirnya setelah dulu sempat ada yang request agar blog ini menampilkan tutorial pencahayaan

pada program 3ds max, hari ini terwujud sudah, capek deh

pada postingan kali ini kami ajarkan kepada anda tentang bagaimana cara menggunakan

pencahayaan Photometric IES Lights pada 3Ds Max yang mana pencahayaan ini biasa di
http://alexking.org/projects/wordpress/popularity-contesthttp://alexking.org/projects/wordpress/popularity-contesthttp://alexking.org/projects/wordpress/popularity-contesthttp://blogargajogja.com/category/tips-and-trikshttp://blogargajogja.com/category/tips-and-trikshttp://blogargajogja.com/category/tips-and-trikshttp://blogargajogja.com/category/tutorialhttp://blogargajogja.com/category/tutorialhttp://blogargajogja.com/category/tutorialhttp://blogargajogja.com/tutorial/tutorial-penggunaan-photometric-ies-lights-pada-3ds-max.htmlhttp://4.bp.blogspot.com/_yeuMOHADSG4/SpSgEAdppWI/AAAAAAAABWg/TOwgKhhZRM0/s1600-h/tutorial+3ds+max+ies+light.jpghttp://4.bp.blogspot.com/_yeuMOHADSG4/SqCyJMB9DtI/AAAAAAAABag/fnCHPTS4X5E/s1600-h/tutorial+autocad+3.JPGhttp://4.bp.blogspot.com/_yeuMOHADSG4/SpSgEAdppWI/AAAAAAAABWg/TOwgKhhZRM0/s1600-h/tutorial+3ds+max+ies+light.jpghttp://4.bp.blogspot.com/_yeuMOHADSG4/SqCyJMB9DtI/AAAAAAAABag/fnCHPTS4X5E/s1600-h/tutorial+autocad+3.JPGhttp://blogargajogja.com/tutorial/tutorial-penggunaan-photometric-ies-lights-pada-3ds-max.htmlhttp://blogargajogja.com/category/tutorialhttp://blogargajogja.com/category/tips-and-trikshttp://alexking.org/projects/wordpress/popularity-contest


6/13

gunakan pada kebanyakan desain interior ruangan, selamat mengikuti

1. Buka program 3ds max mu bukan program microsoft word (ya iya lah, he3x) atau siapkandesain interior yang ingin diberikan cahaya ies light bukan desain baju lebaranmu (ya iya lah,

he3x) ,

lalu klik lightpilih photometric (lihat gambar dibawah)

2. Klik pada tombol target point, lalu pada Intensity pada distribution pilih web (lihat gambar

dibawah)
http://4.bp.blogspot.com/_yeuMOHADSG4/SpSgDrGTFMI/AAAAAAAABWY/rx6ZqzYra68/s1600-h/tutorial+3dmax+ies+light+1.JPG


7/13

3. Buka rollout web parameter, lalu klik

tombol none, lalu cari file ies light nya.. kalo belum punya download diwww.51render.com ,

lalu pilih jenis ies light nya, lalu open (lihat gambar dibawah)

4. Rampung deh..
http://www.51render.com/http://www.51render.com/http://www.51render.com/http://3.bp.blogspot.com/_yeuMOHADSG4/SpShUyjZTEI/AAAAAAAABWo/WdY-mh1NpjI/s1600-h/tutorial+3dmax+ies+light+3.JPGhttp://1.bp.blogspot.com/_yeuMOHADSG4/SpSgDaRh5xI/AAAAAAAABWQ/i9b7yrGZ_tc/s1600-h/tutorial+3dmax+ies+light+2.JPGhttp://3.bp.blogspot.com/_yeuMOHADSG4/SpShUyjZTEI/AAAAAAAABWo/WdY-mh1NpjI/s1600-h/tutorial+3dmax+ies+light+3.JPGhttp://1.bp.blogspot.com/_yeuMOHADSG4/SpSgDaRh5xI/AAAAAAAABWQ/i9b7yrGZ_tc/s1600-h/tutorial+3dmax+ies+light+2.JPGhttp://www.51render.com/


8/13

Tutorial 3Ds Max Cara Merender Suasana Malam Hari

Dengan Vray

OK langsung aja, untuk postingan kali ini, tak informasikan kepada anda semua bagaimana cara

merender eksterior rumah pada saat suasana malam hari dengan vray, hasilnya seperti gambar

diatas. Perlu diketahui juga bahwa tutorial ini di-peruntuk-kan bagi anda-anda kabeh yang sudahmenguasai program 3Ds Max, karena penjelasan dalam tutorial ini di persingkat ben ora capek

ngetiknya dan banyak makan tempat, jadi jangan salahkan daku jikalau dirimu radonk, he3x,selamat mengikuti tutorial berikut ini

In this tutorial I will go through all the steps that we usually do when Im asked to do anexterior night-rendering. In order to follow it you need to know the basics of 3ds max and vray

1) Natural light The first step is to choose a background image of a sky. For this tutorial I have

used the image bellow

Now put the desired image into the environment slot (3d maxs environment slot, not invrays). In the vray settings, check global illumination, select lightcache for secondary bounces,

irradiance map for primary (you could also use brute force, but it will take longer to render). In

the global switches tab, make sure that default lights is unchecked.
http://blogargajogja.com/tutorial/tutorial-3ds-max-cara-merender-suasana-malam-hari-dengan-vray.htmlhttp://blogargajogja.com/tutorial/tutorial-3ds-max-cara-merender-suasana-malam-hari-dengan-vray.htmlhttp://1.bp.blogspot.com/_yeuMOHADSG4/SkDAK5xnbeI/AAAAAAAAA9k/VPCDsCY3kGs/s1600-h/backgroundimage.jpghttp://1.bp.blogspot.com/_yeuMOHADSG4/SkC8odnNeOI/AAAAAAAAA9c/0wpjDC_OLxw/s1600-h/tutorial-vray-exterior.jpghttp://1.bp.blogspot.com/_yeuMOHADSG4/SkDAK5xnbeI/AAAAAAAAA9k/VPCDsCY3kGs/s1600-h/backgroundimage.jpghttp://1.bp.blogspot.com/_yeuMOHADSG4/SkC8odnNeOI/AAAAAAAAA9c/0wpjDC_OLxw/s1600-h/tutorial-vray-exterior.jpghttp://blogargajogja.com/tutorial/tutorial-3ds-max-cara-merender-suasana-malam-hari-dengan-vray.htmlhttp://blogargajogja.com/tutorial/tutorial-3ds-max-cara-merender-suasana-malam-hari-dengan-vray.html


9/13

Last but not least go to the vray environment slot and check GI environment (skylight) override.

In the slot right beside put a gradient (dark blue in the upper slot, a lighter blue in the middle and

a pale orange or purple in the lower position)

2) Adding artificial lights inside As you notice, it is starting too look like a night rendering, but

at the moment it lacks artificial lighting so the spaces look deserted.

We will begin by adding vray lights inside the house, to simulate artificial lighting. The

important thing to keep in mind at this point is that artificial light can look different from onecase to another depending on many factors (intensity, color temperature, size of the space that is

actually lit, etc.) so you shouldnt put a light source and instance it all over the place. Be creative

and play with parameters like intensity multipliers, filter colors, etc. For this scene I have used
http://4.bp.blogspot.com/_yeuMOHADSG4/SkDALXAApUI/AAAAAAAAA90/Ha9u4Q9SEug/s1600-h/exteriorphase1.jpghttp://3.bp.blogspot.com/_yeuMOHADSG4/SkDALMTMDYI/AAAAAAAAA9s/lWUgyRhj728/s1600-h/initialsettings.jpghttp://4.bp.blogspot.com/_yeuMOHADSG4/SkDALXAApUI/AAAAAAAAA90/Ha9u4Q9SEug/s1600-h/exteriorphase1.jpghttp://3.bp.blogspot.com/_yeuMOHADSG4/SkDALMTMDYI/AAAAAAAAA9s/lWUgyRhj728/s1600-h/initialsettings.jpg


10/13

spherical vray lights with intensity multipliers varying from 1 to 2, filter colors with orange,

yellow and blue tints and different a radius for each one

If you hit another render you will end up with something very similar to the following.

3) Simulating artificial light spreading from insideNow we have light inside the house, but

the light doesnt seem to come out enough. Therefore we will place vray planar lights just infront of the windows, pointing towards the exterior, like in the following image
http://1.bp.blogspot.com/_yeuMOHADSG4/SkDALjrAHGI/AAAAAAAAA-E/PPXUNjti3Ow/s1600-h/exteriorphase2.jpghttp://3.bp.blogspot.com/_yeuMOHADSG4/SkDALcK7GYI/AAAAAAAAA98/OtTiCBfK3qg/s1600-h/interiorlights.jpghttp://1.bp.blogspot.com/_yeuMOHADSG4/SkDALjrAHGI/AAAAAAAAA-E/PPXUNjti3Ow/s1600-h/exteriorphase2.jpghttp://3.bp.blogspot.com/_yeuMOHADSG4/SkDALcK7GYI/AAAAAAAAA98/OtTiCBfK3qg/s1600-h/interiorlights.jpg


11/13

Hit another test rendering and you should have something similar to the render bellow:

4) Adding artificial lights in the courtyardWe are getting closer. What doesnt look right at

the moment is the fact that the courtyard is too dark. Depending on your scene, you may haveexterior lighting fixtures (like the lighting posts that I have in this scene), or even exterior

spotlights that illuminate the building. If you dont have specific instructions for these, you could

place lights somewhere behind the camera, so that you give the impression that the space isreceiving illumination from neighboring sources (street lights, car lights, or even otherbuildings).

In this particular scene, adding lights to the lighting small garden lighting posts should be

enough. First I have assigned them a vraylight material with a gradient map; than I have placed

vray spherical lights over each one. For each vray light in the courtyard I have excluded the
http://3.bp.blogspot.com/_yeuMOHADSG4/SkDA7nXq87I/AAAAAAAAA-U/TS4p8MALboU/s1600-h/exteriorphase3.jpghttp://3.bp.blogspot.com/_yeuMOHADSG4/SkDA7R47T2I/AAAAAAAAA-M/hkKvucPRA80/s1600-h/windowlights.jpghttp://3.bp.blogspot.com/_yeuMOHADSG4/SkDA7nXq87I/AAAAAAAAA-U/TS4p8MALboU/s1600-h/exteriorphase3.jpghttp://3.bp.blogspot.com/_yeuMOHADSG4/SkDA7R47T2I/AAAAAAAAA-M/hkKvucPRA80/s1600-h/windowlights.jpg


12/13

lighting post bellow it. This is kind of a fake, but in the end it looks right, and thats all that

matters. (If you want to do it more accurate check out thelampshade tutorialas well).

Hitting a test render at this stage you should obtain something like this:

5) Photoshop touches a) Add a subtle glow effect to the visible artificial light sources (in this

case, the small lighting posts). You can do this using the diffuse glow filter. b) In a new layer,add a linear gradient from bottom to somewhere at the middle from orange to transparent. Put the

layer on color and play with the transparency until you like the result. If you are feeling

creative, you can also try some subtle brush strokes, with different tints of red, yellow or orange

to create diversity. After having done all of the above, here is the final image

(CLICK THE IMAGE TO VIEW A HIGH RESOLUTION RENDERING)
http://www.cgdigest.com/index.php/creating-a-lamp-shade-material-in-vray/http://www.cgdigest.com/index.php/creating-a-lamp-shade-material-in-vray/http://www.cgdigest.com/index.php/creating-a-lamp-shade-material-in-vray/http://3.bp.blogspot.com/_yeuMOHADSG4/SkDA8ad_oRI/AAAAAAAAA-k/CDcLJordJiw/s1600-h/exteriorphase4.jpghttp://4.bp.blogspot.com/_yeuMOHADSG4/SkDA7_LGzzI/AAAAAAAAA-c/VSExNzr4jIg/s1600-h/courtyardlights.jpghttp://3.bp.blogspot.com/_yeuMOHADSG4/SkDA8ad_oRI/AAAAAAAAA-k/CDcLJordJiw/s1600-h/exteriorphase4.jpghttp://4.bp.blogspot.com/_yeuMOHADSG4/SkDA7_LGzzI/AAAAAAAAA-c/VSExNzr4jIg/s1600-h/courtyardlights.jpghttp://www.cgdigest.com/index.php/creating-a-lamp-shade-material-in-vray/


13/13

Conclusion Rendering an exterior at night can be very tricky. The best approach in my opinion

is to take it systematically by starting with natural light, and adding artificial lights one by one

during the process. Otherwise, you may find yourself lost not knowing where you did somethingwrong. I can not stress enough how important is to have a few examples of professional

architectural photography at hand and look at them at every stage of the process. Here are some

general guidelines that I always keep in mind when Im doing a night rendering:

1) Even at night time the skylight still casts a subtle shadow. 2) Never make the sky 100% black;

it should have either a blue or a purple tint. 3) If there are no artificial lights on the ground, the

sky will always be brighter and the ground would borrow a bluish or purple tint from the sky

4) The lighting is a mixture of dark purple/bluish tints at the upper part and orange/yellow on the

ground and on the building(s). That is because the natural light blends with artificial light sourcesplaced on the ground. 5) The colors are more saturated in a night rendering that in a daytime one.

6) Artificial light sources have a subtle glow around them. 7)If you have moving objects inyour scene, dont be afraid to use motion blur. If you know a bit about photography, you are

aware that at night time photographers use high exposure times when they target architectural

subjects; this causes all moving things around (cars, people, etc) to appear with motion blur. Ifyou think that I have missed something, feel free to post a comment and let me know.Source : www.cgdigest.com

Popularity: 1% [?]

Kata Kunci Artikel ini

tutorial vray 3d max,tutorial vray 3ds max,settingan merender menggunakan 3dmax,tutorial vray

3dmax,tutorial vray eksterior,vray tutorial 3ds max,cara setting vray
http://alexking.org/projects/wordpress/popularity-contesthttp://alexking.org/projects/wordpress/popularity-contesthttp://alexking.org/projects/wordpress/popularity-contesthttp://1.bp.blogspot.com/_yeuMOHADSG4/SkC8odnNeOI/AAAAAAAAA9c/0wpjDC_OLxw/s1600-h/tutorial-vray-exterior.jpghttp://alexking.org/projects/wordpress/popularity-contest

tutorial v ray

Documents