pertemuan 3
DESCRIPTION
Pertemuan 3. Array dkk. ARRAY. Tipe data turunan. Contoh deklarasi : int x[20]; SATU variabel untuk menyimpan BANYAK data dengan TIPE data yang SAMA. Mempunyai INDEKS. Struktur data : Alokasi memori bersifat statis/ tetap. Konsep : string, array multidimensi. 4. 3. 2. 1. 7. - PowerPoint PPT PresentationTRANSCRIPT
Array dkk
Pertemuan 3
ARRAYTipe data turunan.Contoh deklarasi : int x[20];SATU variabel untuk menyimpan BANYAK
data dengan TIPE data yang SAMA. Mempunyai INDEKS.
Struktur data : Alokasi memori bersifat statis/ tetap.Konsep : string, array multidimensi
4 3 2 1 7
Contoh programProgram menghitung rata-rata nilai.Algoritma :
Deklarasikan variabel array untuk menyimpan data-data nilai.
Input data nilai dengan perintah looping. Akses elemen dengan operator kurung siku ([]).
Hitung penjumlahan data-data nilai.Hitung rata-rata = jumlah total/ jumlah data.
STRUCTTipe data turunan.Contoh deklarasi :
struct {int jari_jari;float luas;float keliling;
} lingkaran;
STRUCT Contd.SATU variabel bisa menyimpan BANYAK data
yang BERBEDA TIPE datanya. Mempunyai ELEMEN.
Struktur data :
Konsep : struct of struct (nested struct).
10
314.0
62.8
Contoh programProgram tentang lingkaran.Algoritma :
Inventarisasi atribut-atribut yang dimiliki oleh sebuah objek lingkaran.
Akses masing-masing elemen dengan memakai operator tanda titik (.).
ARRAY OF STRUCTStruktur data berupa array yang setiap
elemennya bertipe struct.Contoh deklarasi :
struct {int NPM;char nama[30];float IPK;
} mhs[100];
Array of Struct Contd.Struktur data :
Untuk akses elemen dimulai dari indeks array kemudian diikuti nama elemennya mhs[3].NPM = 1234;
100
Abdullah
3.80
101
Budi
3.45
102
Candra
3.22
103
Daud
3.17
Contoh ProgramProgram data mahasiswa.Program tabel fungsi kuadrat.
Tugas Kelompok - RESUMEARRAY Array as function parameter String Two dimensional arraySTRUCT Array of structure Unions Struct as function parameter
Review BPDari slide pak cahyo pertemuan 7 dan pertemuan 2
dengan sedikit modifikasi
ArrayReview BP
13
ArraysAn array is a special kind of object that is
used to store a collection of data.The data stored in an array must all be of
the same type, whether primitive or reference data types.
For example, we may want to store:An array of double valuesAn array of int values
14
The Need for ArraysWrite a Java program that asks the user for
10 exam scores and displays the average.What if you are also required to display all
the scores which are higher than the average?
What if you are to record 100 scores?
15
The Problem:
We need to keep track of each score that is entered by the user in an efficient manner.
import java.util.;public class ExamScoresForLoop{
public static void main(String[] args){Scanner keyboard = new Scanner (System.in);double score;double total = 0.0;for(int i = 1; i <= 10; i++)
{System.out.println("Enter score " + i +":");score = keyboard.nextDouble();total = total + score;}System.out.println("The average score is " + total/10);
// how to display scores which are greater than average???}
}
16
Using Arrays
Instead of only storing one score:score
0x0010
We need to store a collection of scores, or what is called an array.
score0x0010
0x0h40
0x0h41
0x0h42
0x0h43
0x0h44
98.9
98.9
50.5
75.0
59.5
65.4
0x0h40
in this case, score is considered to be a reference to the array at the memory address stored.
17
Accessing Array ElementsOnce an array has been declared, we can
store and access data in it.We must specify the index representing the
position of the data.The index always begins from 0.
score 98.9
50.5
75.0
59.5
65.4
0
1
2
3
4
Index representing position of the data
score[0]
score[3]
18
Declaring ArraysAn array is declared by:
specifying the type of data it will holdspecifying the name of the array with an
identifierincluding square brackets [ ]
Syntax:<data type>[] <identifier>;
Examplesint[] num; // an array of intsdouble[] score; // an array of doubles Student[] st; // an array of Student objects
19
Creating ArraysIn Java, the array is an object and must be
instantiated with its size.Syntax:
<identifier> = new <data type>[<size>];Therefore, an array may be declared and
instantiated in one statement:int[] num = new int[10]; //creates an array to store 10 integers
It may also be instantiated in two steps:int[] num;num = new int[10];
20
Initializer ListsAn array can also be created by using an
initializer list that fills in the values of the elements in the array in one line.
When an initializer list is used, the new operator and size of the array are not specified.
Examples:int[] num = {3, 6, 5, 7, 2, 8, 10, 20}char[] letterGrades = {'A', 'B', 'C', 'D', 'F'}
21
Bounds CheckingAn array that has been instantiated has a
fixed size.int[] num = new int[10] has array elements
from num[0] to num[9] only.The Java interpreter will indicate an out-
of-bounds error at run-time if the array index is not valid.
Each array object has an attribute length that stores the size of the array, or the number of elements.
Therefore an array will have valid indices from 0 to (length-1) only.
22
Traversing ArraysWe can use a for loop to traverse the array For example, we may display each
element of the array:for (int i = 0; i < maks; i++){System.out.println(data[i]);
}We may even use a for loop to allow the
user to enter the elements of the array via interactive input.
23
Searching an ArrayWe may need to check if an element is in the
array:We can use the following logic to check whether a
name that the user enters is in the array of names declared and filled earlier:ask user for the required nameStart from i = 0assume that it is not foundWhile the required name is not found and i <
length of array if the value at position i corresponds to the required
name then the name is found
otherwise,check the next element (i = i + 1)
24
CalculationsWe often need to perform calculations
using some or all of the elements of the array:total of all elementsthe averagethe element with the largest or smallest value
Assume that an array of double values has been declared and filled:double[] score = new double[10];
25
Finding the Total and AverageIn order to find the total, we must initialize and
keep track of the running total.The total is then used to calculate the average.
double total = 0.0;for (int i = 0; i < score.length; i++){
total = total + score[i];}System.out.println("The total is " + total);double avg = total / score.length;System.out.println("The average is " + avg);
26
Arrays and MethodsArrays can be used as parameters in
methods: the entire array is passed to the method.
For example, write a method findEmp that receives two parameters:the first parameter is an array of Strings
representing names of employeesthe second parameter is a String representing
the name of the employee requiredThe method should return the position of
the employee whose name is found based on the second parameter.
27
Arrays as Parameters
The method can be defined as follows:
public static int findEmp(String[] name, String wanted){
for(int i = 0; i < name.length; i++)if (wanted.equalsIgnoreCase(name[i]))
return i; // found at pos i
return -1; // not found}
28
Arrays as Returned ObjectsArrays can also be returned by methods,
as long as the array type is specified as the return type.
The following method takes as input an array of Strings and returns another array with the lengths of each of the Strings in the array.
public static int[] findLengths(String[] strArray){
int[] strLength = new int[strArray.length];for (int i = 0; i < strArray.length; i++)
strLength[i] = strArray[i].length();return strLength;
}
29
Initial Values of Array Elements
All elements in an array are automatically initialised with default values.
An array of numeric data has default elements with value 0 double[] score = new double[10];all elements in score will have value 0.0
Arrays of boolean will be initialized to false.
Arrays of reference data types will be initialized to null.
CLASSReview BP
Class adalah template untuk pembuatan obyek
Class memiliki anggota :AtributMethod
Anatomy of a Java ClassA Java console application must consist of
one class that has the following structure: /* This is a sample program only. Written by: Date: */public class SampleProgram{
public static void main(String [] args){
int num1 = 5; // num stores 5System.out.print("num1 has value ");
System.out.println(num1);}
}
multi-line comments
in-linecomments
name of the class
statementsto be executed
Anatomy of a Java ClassA Java console application must consist of
one class that has the following structure: /* This is a sample program only. Written by: Date: */public class SampleProgram{
public static void main(String [] args){
int num1 = 5; // num stores 5System.out.print("num1 has value ");
System.out.println(num1);}
}
class header
mainmethod
Contoh class tabunganclass BankAccount{ private double balance; // account balance public BankAccount(double openingBalance) { // constructor balance = openingBalance; } public void deposit(double amount) { // makes deposit balance = balance + amount; } public void withdraw(double amount) { // makes withdrawal
balance = balance – amount; } public void display(){ // displays balance System.out.println("balance=" + balance); }} // end class BankAccount
Contoh penggunaan class tabungan
class BankApp{ public static void main(String[] args) {
// create acctBankAccount ba1 = new BankAccount(100.00); System.out.print("Before transactions, ");// output : Before transactions, balance=100ba1.display(); // display balanceba1.deposit(74.35); // make depositba1.withdraw(20.00); // make withdrawalSystem.out.print("After transactions, ");// output : After transactions, balance=154.35ba1.display(); // display balance
} // end main()} // end class BankApp