hidrolik

Konsep Hidrolik

dan penggunaan tekanan pada fluida

Sifat penting tekanan pada fluida

• Fluida akan meneruskan tekanan ke semua bagian , dengan mengabaikan bentuk wadahnya

• Sebuah gaya dapat diterapkan dapat diterapkan kapan saja di inginkan

• Gaya dapat berlipat bergantung luas area kontak dari piston yang di pergunakan untuk menekan air

Penerapan penggunaan hidrolik

• Rem Mobil• Dongkrak • Fork lift• Lift• Bulldozer• Kamera Televisi

Bagaimana Rem Mobil Bekerja• Sebuah gaya yang cukup kecil

diterapkan pada pedal rem yang akan menekan piston pada area yang cukup kecil

• Piston akan menekan cairan rem• Tekanan akan menyebar ke seluruh

bagian minyak rem• Tekanan akan bekerja pada empat

piston dengan area yang lebih besar dan melipat gandakannya

• Sebagaimana tekanan yang terdistribusi merata, rem akan bekerja dengan kekuatan yang sama

Hydraulic brake• The diagram shows a

simple brake where a pedal will push down on the smaller master piston

• The force pushing down will put the liquid under pressure

• The pressure is transmitted through the liquid and against the slave piston

• The pressure causes the slave piston to exert a force where it is needed

Using the formula P=F/A

• What is the pressure exerted on the liquid by the slave piston?

Answer:Pressure = 10N / 5cm2 = 2 N/cm2

• Calculate the area of the slave piston that will lift a 100N load

Answer:Area = force / pressure = 100N / 2 N/cm2

Master PistonIs 5 cm2

10N

Slave piston

More questions on hydraulics

1. What will the force (F1) need to be to exert a pressure of 20 N/cm2 ?

2. Calculate the weight (F2) that can be lifted by the slave piston.

Answers: 1. Force = 20 N/cm2 x 10cm2 = 200N 2. Force = 20 N/cm2 x 100cm3 = 2000N

Master piston = 10cm2 Slave piston

= 100cm2

Summary of the principles of hydraulics

• Pressure is transmitted throughout a liquid• A force may be applied anywhere to the liquid• All hydraulic systems use a small master piston and

a large slave piston• A small force is used to create a very big force• The small master piston is used to apply a force• The slave piston is always bigger than the master

piston• The larger slave piston will multiply the original

force put on the master piston

This powerpoint was kindly donated to www.worldofteaching.com

http://www.worldofteaching.com is home to over a thousand powerpoints submitted by teachers. This is a completely free site and requires no registration. Please visit and I hope it will help in your teaching.