06 mine fan general

50
Mine Fan - General Nuhindro Priagung Widodo Teknik Pertambangan Fakultas Teknik Pertambangan dan Perminyakan Institut Teknologi Bandung 2014 #NPW 2014 1

Upload: nur-syamsu

Post on 18-Feb-2016

221 views

Category:

Documents


2 download

DESCRIPTION

peranginan tambang dalam

TRANSCRIPT

Page 1: 06 Mine Fan General

Mine Fan - General

Nuhindro Priagung Widodo

Teknik PertambanganFakultas Teknik Pertambangan dan Perminyakan

Institut Teknologi Bandung 2014

#NPW 2014 1

Page 2: 06 Mine Fan General

Isi

1. Pengertian dan istilah2. Klasifikasi dan cara kerja alat ventilasi mekanis

- Fan sentrifugal- Fan axial- Mixed-flow fan

3. Kurva karakteristik fan4. Hukum-hukum fan

#NPW 2014 2

Page 3: 06 Mine Fan General

Klasifikasi alat ventilasi mekanis untuk Tambang

#NPW 2014

Fans Centrifugal Radial tipForward curvedBackward curved

Axial Flow Tube-axialVane-axial

Compressors Centrifugal

Axial Flow

Positive displacement

RotaryAxial Flow

Injectors Cylindrical

Conical

Venturi

3

Page 4: 06 Mine Fan General

Fan

#NPW 2014Axial fan Centrifugal fan

4

Page 5: 06 Mine Fan General

Tube-fan

#NPW 2014 5

Page 6: 06 Mine Fan General

Mixed-flow fan

#NPW 2014 6

Page 7: 06 Mine Fan General

#NPW 2014 7

Page 8: 06 Mine Fan General

#NPW 2014

Axial fan

Centrifugal fan

8

Page 9: 06 Mine Fan General

Variable/adjustable Pitch Fan

#NPW 2014 9

Page 10: 06 Mine Fan General

Compressed-air injectors

#NPW 2014 10

Page 11: 06 Mine Fan General

#NPW 2014 11

Page 12: 06 Mine Fan General

#NPW 2014 12

Page 13: 06 Mine Fan General

#NPW 2014 13

Page 14: 06 Mine Fan General

ASSESSMENT OF FANS AND BLOWERSWhat is fan efficiency / performance?Fan efficiency is the ratio between the power transferred to the air stream and

the power delivered by the motor to the fan. The power of the airflow is the product of the pressure and the flow, corrected for unit consistency.

Another term for efficiency that is often used with fans is static efficiency, which uses static pressure instead of total pressure in estimating the efficiency. When evaluating fan performance, it is important to know which efficiency term is being used.

The fan efficiency depends on the type of fan and impeller. As the flow rate increases, the efficiency increases to certain height (“peak efficiency”) and then decreases with further increasing flow rate. The peak efficiency ranges for different types of centrifugal and axial fans.

#NPW 2014 14

Page 15: 06 Mine Fan General

Fan Efficiency

#NPW 2014 15

Page 16: 06 Mine Fan General

Penempatan Fan

#NPW 2014

2. Forcing system

3. Exhausting system

Fan

Outlet unit

Outlet unit Fan

1. Fan with inlet-outlet duct

16

Page 17: 06 Mine Fan General

Fan sentrifugal

#NPW 2014

Backward bladed-Centrifugal Impeller

17

Page 18: 06 Mine Fan General

Velocity and Total Pressure of Centrifugal Fan

#NPW 2014

a. Radial tip b. Forward-curved c. Backward-curved

Va =Vt + Vr cot (m/s)

Pt = Vt(Vt + Vr cot )

Vt tangential velocity of bladeVa tangential velocity of airU velocity of air relative to the bladeV absolute velocity of the airblade angle in degreesn fan speed in rpmD diameter impeller plus bladeQ quantity of air Pt total pressure (Pa)

Pt = Vt(Vt - Vr cot )Pt = VtVa

Pt = Vt2

Vt = Dn/60 (m/s)Vr = Q/A (m/s)

18

Page 19: 06 Mine Fan General

Theoretical Centrifugal Fan Characteristic Curves

#NPW 2014 19

Page 20: 06 Mine Fan General

Actual Centrifugal Fan Characteristic Curves

#NPW 2014 20

Page 21: 06 Mine Fan General

Axial Fan

#NPW 2014 21

Page 22: 06 Mine Fan General

#NPW 2014

Pt = Vt(V1 – V2)

Typical Axial Fan Characteristic Curves

Vt tangential velocity of blade(V1 – V2) change in the rotational component of the absolute velocity. (V1 – V2) is varies along radius.

22

Page 23: 06 Mine Fan General

Fan Laws

#NPW 2014 23

Page 24: 06 Mine Fan General

Fan Laws

#NPW 2014 24

Page 25: 06 Mine Fan General

Perubahan blade angle terhadap kurva karakteristik fan dan total efisiensi

#NPW 2014 25

Page 26: 06 Mine Fan General

Perubahan blade angle terhadap kurva karakteristik fan dan

Fan Power

#NPW 2014 26

Page 27: 06 Mine Fan General

Contoh fan technical

specification

#NPW 2014 27

Page 28: 06 Mine Fan General

Contra-rotating axial fan

#NPW 2014

A modification of the axial-flow fan. It consists of two impellers with aerofoil shaped blades that rotate in opposite directions. The drive is by means of a single motor through differential gears, or two separate motors, one for each impeller. They are placed in the airstream and act as streamlined hubs. These fans are available for auxiliary ventilation in mines.

28

Page 29: 06 Mine Fan General

Single vs. Contra-rotating axial fan

#NPW 2014 29

Page 30: 06 Mine Fan General

Pengaturan Fan

#NPW 2014 30

Page 31: 06 Mine Fan General

Pengaturan Fan

#NPW 2014 31

Page 32: 06 Mine Fan General

Kondisi Stall

#NPW 2014 32

Page 33: 06 Mine Fan General

Main Fan

#NPW 2014 33

Page 34: 06 Mine Fan General

Auxiliary Fan

#NPW 2014 34

Page 35: 06 Mine Fan General

Masalah dalam Instalasi Fan

#NPW 2014 35

Page 36: 06 Mine Fan General

Pemeliharaan Fan

#NPW 2014 36

Page 37: 06 Mine Fan General

Fan kombinasi: Series

#NPW 2014 37

Page 38: 06 Mine Fan General

#NPW 2014

Fan kombinasi: Paralel

38

Page 39: 06 Mine Fan General

Typical pressure gradient

#NPW 2014 39

Page 40: 06 Mine Fan General

Fan Evasees and Diffusers

#NPW 2014

Re (m) Ae (m2) Teta Conv. Eff. Q vDesain L (m) L/Rf Rf (m) Af (m2) Ae/Af (deg) m3/s m/s Hv (Pa) Hr (Pa) Pr (kW)

A 6.72 6 2 12.57 3.19 7.46 0.6 70 5.57 18.62 102.42 7.17 1.12 3.94 70 17.76 189.31

B 3.36 3 1.3 5.31 1.35 3.07 0.87 70 13.18 104.30 73.96 5.18 1.12 3.94 70 17.76 189.31

(Pa)

(Pa)

40

Page 41: 06 Mine Fan General

#NPW 2014 41

Page 42: 06 Mine Fan General

Fan curves

42

Cikoneng

Cibitung

#NPW 2014

Page 43: 06 Mine Fan General

Difficulties in assessing the performance of fans and blowers

In practice certain difficulties have to be faced when assessing the fan and blower performance, some of which are explained below:

Non-availability of fan specification data: Fan specification data (see Worksheet 1) are essential to assess the fan performance. Most of the industries do not keep these data systematically or have none of these data available at all. In these cases, the percentage of fan loading with respect to flow or pressure can not be estimated satisfactorily. Fan specification data should be collected from the original equipment manufacturer (OEM) and kept on record.

Difficulty in velocity measurement: Actual velocity measurement becomes a difficult task in fan performance assessment. In most cases the location of duct makes it difficult to take measurements and in other cases it becomes impossible to traverse the duct in both directions. If this is the case, then the velocity pressure can be measured in thecenter of the duct and corrected by multiplying it with a factor 0.9.

#NPW 2014 43

Page 44: 06 Mine Fan General

Difficulties in assessing the performance of fans and blowers

Improper calibration of the pitot tube, manometer, anemometer & measuring instruments: All instruments and other power measuring instruments should be calibrated correctly to avoid an incorrect assessment of fans and blowers. Assessments should not be carried out by applying correction factors to compensate for this.

Variation of process parameters during tests: If there is a large variation of process parameters measured during test periods, then the performance assessment becomes unreliable.

#NPW 2014 44

Page 45: 06 Mine Fan General

Choose the right fan

Important considerations when selecting a fan are (US DOE, 1989):

• Noise• Rotational speed• Air stream characteristics• Temperature range• Variations in operating conditions• Space constraints and system layout• Purchase costs, operating costs (determined by

efficiency and maintenance), and operating life

#NPW 2014 45

Page 46: 06 Mine Fan General

Maintain fans regularly

Regular maintenance of fans is important to maintain their performance levels. Maintenance activities include (US DOE, 1989):

• Periodic inspection of all system components• Bearing lubrication and replacement• Belt tightening and replacement• Motor repair or replacement• Fan cleaning

#NPW 2014 46

Page 47: 06 Mine Fan General

Power consumption among flow control options

#NPW 2014 47

Page 48: 06 Mine Fan General

Perbandingan kelebihan dan kekurangan terhadap metode-metode pengaturan fan

#NPW 2014 48

Page 49: 06 Mine Fan General

#NPW 2014 49

Page 50: 06 Mine Fan General

#NPW 2014 50